Superior Glove LogoClick to Call
MENU
Superior Glove Works, Ltd.

Bienvenidos a nuestra página web en Español, exclusiva para el territorio Mexicano.

Welcome visitors from Mexico! Visit our Mexico specific website in English.

Call us: (888) 428-1210

Superior Glove Newsletter

"Over 70% of hand & arm injuries could have been prevented with the proper protection equipment."

Injuries cost over $2000 on average. If reading our newsletter helps you prevent even one injury, isn’t that worth it?

Sign Up Now - it's free! (you can unsubscribe at any time)

No thanks, I don't need free safety tips or advice

Thanks for signing up!

Thank you for joining our newsletter list. You will receive your first issue shortly.

Don't forget to follow Superior Glove's social channels:

Close this and start browsing our gloves.

Superior Glove Newsletter

Hand injuries cost over $2,000 on average. If reading our newsletter helps you prevent even one injury, isn't that worth it?

You can unsubscribe at any time

No thanks, I don't want to prevent hand injuries.

Enjoying this post? Tell your friends!

Like this post? Share it!

The Barehanded Guide to Gloves

by Matt on March 14, 2017

Comments (13)


Nothing starts my morning off quite like sitting down at my computer with a cup of coffee to check Superior Glove’s social media presence. We’ll have a few kind comments on Twitter, some content sharing on LinkedIn, a tumbleweed rolling across Google Plus… Then I visit Facebook to see what fresh hell of complaints people have come up with about safety gloves.

These comments range from the misinformed:

“I’ve been [in] sheet metal for 17 years, and some of the worst cuts I have gotten on my hands were after wearing gloves. Your hands get soft, and you get used to grabbing sharp edges. Plus you can’t pick up screws, and bolts and nuts.”

To the poetic:

negative social media comment

We’ve joked on the site before about the macho resistance to wearing PPE. About the workers who take pride in the calluses that have built up on their hands. The ones who wrap their safety gloves in duct tape so they can still be worn long after the expiry date has been met.

We can present the statistics yet hand injuries are still the second most common injury on job sites.

I get it, you don’t like gloves. But what I don’t get is why you would sacrifice the use of your hands to save your pride. I never want to hear someone say the sentence “it’s part of the job.”

 

Preventable injuries are not a part of the job — they are the reason that jobs are delayed and come in over-budget.

 

We set out to hear from real people about why they hate safety gloves so much. Then we used the feedback to find solutions to their complaints. Not only for their own sake but the sake of their safety managers who are exhausted from trying to keep workers safe.

Since most of the dissent came from Facebook, that became our social media of choice. To inspire Facebook users to comment, we posted this picture:

 

real men don't wear gloves
Here’s some of the feedback we received:

 

Sizing Concerns:

Randy W. commented:

“I have big hands. I very much do not like wearing gloves. They are too tight in all the wrong areas. Even with a 2XL or 3XL glove. Very rarely do I find a pair I like.”

This is a common complaint and a valid complaint — who wants to wear something that’s uncomfortable?

Glove Suggestion:

Avoid leather gloves; look for string-knit options.

Here’s why:

Leather gloves are good for many things, but conforming to the shape of your hand isn’t one of them. Compared to a string-knit, they are bulkier, hotter and more constricting. If you’re having an issue finding a glove size to fit your hand, string-knits are the best option.

You can also ensure the best fitting gloves by measuring the size of your hand. Download our glove and sleeve sizing guide now!

 

Lack of Dexterity:

David S. said:

“Usually gloves prevent the ability to do a certain task. Your sense of touch isn’t the same as if you weren’t wearing gloves, it’s tough to handle small objects, which prevent you from doing a job at a steady pace [while] providing protection at the same time.”

Dexterity can be pretty subjective. The range of motion needed to carry lumber will be different from that needed to work on circuit boards. But workers in both applications will want their version of the best dexterity. Twenty years ago the only safety glove options were a leather fitters glove or a bulkier string-knit glove.

Today, we have a lot more options:

  • Different glove gauges from a bulkier 7-gauge up to a slim 18-gauge
  • Glove coatings for different uses like polyurethane for assembly or micropore nitrile for handling oily metal
  • Engineered yarns that can increase cut resistance without increasing the bulk of the glove

Glove Suggestion:

Look for a finer gauge glove — between 13 and 18 — and choose a coating like polyurethane which is great for tactile feel. Our Emerald CX® 13-gauge Kevlar®/Stainless-steel Knit with PU Palms which combines good tactile feel with ANSI level A4 cut resistance.

Emerald CX 13-gauge kevlar/stainless-steel knit with pu palms S13CXPU
Get a Free Glove Sample

 

Too Constricting:

Aaron P. said:

“I hate wearing gloves. I’m a steel flame cutter by trade. I find [gloves] too constricting… My hands and arms always have burns on them. I only put gloves on when I’m handling something very hot or heavy!”

Gloves that protect against high heat can be a bit less roomy from the amount of insulation that’s needed to prevent burns.

When it comes to heat-resistant safety gloves, it’s not uncommon for people to over-estimate how much heat protection they’ll need — selecting a glove that protects against 500°F when they’re only handling parts that are 350°F.

Here are four things to consider when selecting heat-resistant gloves:

  1. How hot is the item? Use an infrared thermometer and get an accurate measurement
  2. How heavy is the item? A fifty pound piece of steel will require more contact than a five-pound piece.
  3. Is there cool down time? The glove will trap heat. If there isn’t time for it to cool down between uses, you’ll begin to feel heat through the material.
  4. How long will you be holding onto the item? The longer you handle an item, the more heat will transfer from the object to your glove.

 

How to Find the Right Safety Gloves:

Without knowing the applications and the hazards associated with it, it’s difficult to suggest the perfect pair of work gloves. However, we manufacture over 3,000 styles of hand and arm protection. So it’s safe to say that we have a style that will match your needs.

You could go to a hardware store to buy generic gloves but these inexpensive options may lack protection and consistency in sizing.

Instead, look to a reputable glove manufacturer when selecting safety gloves… Might I suggest selecting Superior as your glove manufacturer of choice.

Then you can be as happy as Charles L.

“I really hated [gloves]! But then my company started to buy Superior gloves… And now seriously I only removed them for break”

If you’re ready to find your perfect pair of safety gloves, click below to take advantage of our sampling program today!

superior glove sampling program


Like this post?   Rate it.   Save it.   Share it!

Rating: 5.00
based on 8 rating(s)

Click a star to rate:
1 Star2 Stars3 Stars4 Stars5 Stars
Loading...

 

Share Your Comments

Reader Comments

Wissmand@telus.net'

I don’t mind wearing gloves outside my equipment but when I am told I have to wear them when I am inside equipment that is stupid what the heck is going to happen inside a closed in cab

Reply Dan Wissman - March 31, 2017

Tobysn@gmail.com'

I am a cabinet maker and consider wearing gloves in my shop a safety violation

If a sliver penatraits your glove and grabs on to your hand it can cause major injury
Also if your glove frays and gets caught by a spinning tool or blade you get pulled in

Reply Toby - May 11, 2017

fdcrndenomey@telus.net'

I’m a asphalt paving contractor,from a wheel barrow full to 10,000 sqft! Gloves are good for the right instance but in certain instances they just make a mess . Asphalt is tar based it sticks to every thing! When you have to hold a lute ( asphalt rake) it is hard to grip with gloves, the gloves that grip are hot to wear, but if you can endure the heat ,the gloves get covered with tar and transfer that tar to all the other tools and controls! Plus wearing gloves gives a false sense of security and you get rammy ! There is a right time and a wrong time to wear gloves. The problem is recognising the appropriate time!

Reply Fred Denomey - July 31, 2017

chrissupermo@hotmail.com'

I am having trouble finding a glove that can handle 3 risk factors simultaneously, I need a glove that is cut resistant, for working with 50 pound oil filters with sharp edges on the only edge available to remove and install the filter. Heat resistant approximately 250 degrees F, with chemical resistance for ester-phosphate.
I can find a glove that works for each situation individually, or maybe for two but nothing that works for all 3 at the same time. I have sliced through leather and cut myself, the chemical gloves available are not heat resistant and the cut resistant gloves have an open mesh one the back and I get chemical exposure through the gloves. At this poisn’t I have to decide which injury I am willing to accept which means I knowingly violate safety policies.

Reply Chris - September 22, 2017

    Hi Chris, I’ve forwarded your email and we’ll have someone reaching out shortly.

    Reply Joe Geng - September 27, 2017

mooseyard@gmail.com'

How about the fact that gloves get caught in machinery and pull your hands in. Do you have a cute for that? I’ll stick with the cuts and grinds instead of loosing a finger or hand.

Reply JESS L HOFFMAN - October 3, 2017

travisleemcdonald@gmail.com'

I’m an electrician by trade and have to sometime terminate 16 gage wire or smaller. I find wearing gloves too bulky for this job, but I still have cut hazards. Any suggestions for a glove that might work?

Reply Travis McDonald - October 21, 2017

wozbuilt@sasktel.net'

I have a very hard time finding gloves that fit. Like never actually. My hands are thick and solid nk loose skin and my fingers are to short for all gloves. I where everything from welding gloves, dirt biking, insulated / non insulated rubber gloves. Very few gloves on the market even come close to fitting.

Reply Robert - November 3, 2017

shawngillespie@live.ca'

Concrete: finishers and drivers/ operators. Dealing with all temperatures and moisture. Constantly washing and using water, but having to operate machinery

Reply Shawn - November 13, 2017



Related Articles

Email Newsletter

Newsletter: Send me useful tips, industry articles and new product announcements (every month or so).

Subscribe today
Privacy Policy

Privacy Policy

Our Commitment to Privacy

Your privacy is important to us. To better protect your privacy we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. To make this notice easy to find, we make it available on our homepage and at every point where personally identifiable information may be requested.

The Information We Collect

This notice applies to all information collected or submitted on the Superior Glove™ website. On some pages, you can make requests and register to receive materials. The types of personal information collected at these pages are:

  • Name and Company Name
  • Address
  • Email address
  • Phone number
  • Website address

How We Use Information

We use the information you provide about yourself when making an inquiry or requesting consultation only to complete that request. We do not share this information with outside parties.

We use return email addresses to answer the email we receive. Such addresses are not used for any other purpose and are not shared with outside parties.

You can register with our website if you would like to receive our newsletter as well as updates on our new services. Information you submit on our website will not be used for this purpose unless you fill out the registration form.

Although information from those who contact us through our website is used to improve the design of it, it is done in a non-identified, purely statistical fashion. We do not share it with outside parties, in any form, at any time.

Finally, we never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above without also providing you an opportunity to opt-out or otherwise prohibit such unrelated uses.

Our Commitment to Data Security

To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put in place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.

Accessibility Policy

Superior Glove Works Ltd. is committed to excellence in serving all customers including people with disabilities. View our Accessible Customer Service Plan.

Let's Connect
 

Superior Glove Works Ltd. – Work and Safety Gloves Copyright 2017 | Call us: 1-888-428-1210
A leading manufacturer, distributor and wholesale supplier of work, safety and industrial gloves since 1910.

Sign up ONE TIME ONLY for free
unlimited access to all of our downloads.

*After signing up, this page will refresh and you’ll be able to download.

BEFORE YOU GO

Download the Definitive Guide to Hand Protection for FREE.

Hand Injury Rates are Reduced by 60% when using the right gloves.

No thanks, my hands are safe