Superior Glove LogoClick to Call
MENU
Superior Glove Works, Ltd.

Bienvenidos a nuestra página web en Español, exclusiva para el territorio Mexicano.

Welcome visitors from Mexico! Visit our Mexico specific website in English.

Call us: (888) 428-1210

Superior Glove Newsletter

"Over 70% of hand & arm injuries could have been prevented with the proper protection equipment."

Injuries cost over $2000 on average. If reading our newsletter helps you prevent even one injury, isn’t that worth it?

Sign Up Now - it's free! (you can unsubscribe at any time)

No thanks, I don't need free safety tips or advice

Thanks for signing up!

Thank you for joining our newsletter list. You will receive your first issue shortly.

Don't forget to follow Superior Glove's social channels:

Close this and start browsing our gloves.

Superior Glove Newsletter

Hand injuries cost over $2,000 on average. If reading our newsletter helps you prevent even one injury, isn't that worth it?

You can unsubscribe at any time

No thanks, I don't want to prevent hand injuries.

Enjoying this post? Tell your friends!

Like this post? Share it!

[Explainer Video] The No-BS Explanation of Arc Flash

by Joe Geng on April 13, 2017

Comments (2)


We had a lot of feedback from our safety webinar The No-BS Approach to Arc Flash and it seemed that there was still some confusion on the subject. Arc flash, also called flashover, is a tricky subject, so we decided to put together an explainer video about it.

 

 

Additional Flashover Resources:

 


Can’t watch the video? Here’s the transcript:

“So… you want to become an expert at preventing arc flash. Well, before we look at how to prevent it, let’s explore what arc flash is.

An arc flash is an electrical explosion that happens on energized equipment. It could be an air conditioner, conveyor belt or light bulb. When electrons move back and forth across a conductor – like a wire – a small area outside of that conductor is energized. Voltage can push those electrons off the conductive surface and onto atoms and molecules in the air. These atoms become ions because they have an electric charge.

The air that is around us in a pretty good insulator to stop these ions from causing an explosion, but it’s not perfect. If another conductor gets inside that energized area – a wrench, moisture in the air, dust build up or someone’s hand – the electrons will travel through that new path. As the electrons push off between the conductors, an arc occurs.You see this every day on a microscale when flicking on a light switch. The little spark inside the bulb is an arc. But on these larger scales, the arc between the two conductors creates heat.

A lot of heat. Arc flashes can reach 35,000 degree Fahrenheit which is four times hotter than the sun. Depending on the voltage of the machine, workers up to twenty-three feet – or two car lengths — away are still in danger of second degree burns.

So, how do you protect yourself from one? 

The only fool-proof way to eliminate the risk of flashover is to de-energize the equipment through lockout/tagout procedures.

If you do need to work on energized equipment, you’re going to need protection. Your entire body is vulnerable to an arc flash, but because we’re a work glove company, we’re going to look only at arc flash-rated gloves… but these ratings apply for other Personal Protective Equipment too.

When choosing arc-rated gloves, you need to look at the glove’s Arc Thermal Performance Value (ATPV).

ATPV is the incident energy needed to cause a second-degree burn. So, the higher the ATPV measurement, the more protective that glove will be.

 “What’s incident energy?” You ask.

It’s the temperature produced (in cal/cm²) at a certain distance (usually eighteen inches) from an arc flash. It’s called incident energy because it’s energy that isn’t supposed to be released.

But how much is one cal/cm²?

If you were to hold your finger directly over the flame of a lighter for one second. That’s one cal/cm².

It takes 1.2 cal/cm² to create a second-degree burn. A second-degree burn means you’ll have red, blistered and swollen skin.

So let’s say you have a glove with an ATPV value of 8.2 cal/cm². That means if the flashover’s incident energy is 8.2 cal/cm², you have a 50% chance of getting a second-degree burn.

Those odds might not sound great but imagine if you were given a 50 percent chance of winning the lottery – suddenly those odds sound pretty good.

And think about it….

Escaping an electrical explosion that is four times hotter than the sun with only second-degree burns is a bit like winning the lottery.”


Like this post?   Rate it.   Save it.   Share it!

Rating: 5.00
based on 1 rating(s)

Click a star to rate:
1 Star2 Stars3 Stars4 Stars5 Stars
Loading...

 

Share Your Comments

Reader Comments

lombart.will@gmail.com'

Thanks for sharing the video. It’s great for understanding the basics. It’s imperative to perform a hazard analysis and predict and prevent faults. I’d also like to highlight the importance of safety labels and safety signs in notifying about potential hazards, and helping to prevent injuries.

Reply Will Lombart - May 23, 2017



Related Articles

Email Newsletter

Newsletter: Send me useful tips, industry articles and new product announcements (every month or so).

Subscribe today
Privacy Policy

Privacy Policy

Our Commitment to Privacy

Your privacy is important to us. To better protect your privacy we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. To make this notice easy to find, we make it available on our homepage and at every point where personally identifiable information may be requested.

The Information We Collect

This notice applies to all information collected or submitted on the Superior Glove™ website. On some pages, you can make requests and register to receive materials. The types of personal information collected at these pages are:

  • Name and Company Name
  • Address
  • Email address
  • Phone number
  • Website address

How We Use Information

We use the information you provide about yourself when making an inquiry or requesting consultation only to complete that request. We do not share this information with outside parties.

We use return email addresses to answer the email we receive. Such addresses are not used for any other purpose and are not shared with outside parties.

You can register with our website if you would like to receive our newsletter as well as updates on our new services. Information you submit on our website will not be used for this purpose unless you fill out the registration form.

Although information from those who contact us through our website is used to improve the design of it, it is done in a non-identified, purely statistical fashion. We do not share it with outside parties, in any form, at any time.

Finally, we never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above without also providing you an opportunity to opt-out or otherwise prohibit such unrelated uses.

Our Commitment to Data Security

To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put in place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.

Accessibility Policy

Superior Glove Works Ltd. is committed to excellence in serving all customers including people with disabilities. View our Accessible Customer Service Plan.

Let's Connect
 

Superior Glove Works Ltd. – Work and Safety Gloves Copyright 2017 | Call us: 1-888-428-1210
A leading manufacturer, distributor and wholesale supplier of work, safety and industrial gloves since 1910.

Sign up ONE TIME ONLY for free
unlimited access to all of our downloads.

*After signing up, this page will refresh and you’ll be able to download.

BEFORE YOU GO

Download the Definitive Guide to Hand Protection for FREE.

Hand Injury Rates are Reduced by 60% when using the right gloves.

No thanks, my hands are safe