-
Dexterity® SN15NTFB
Product ID: SN15NTFBPuncture-resistant, general-purpose gloves that repel oils and solvents
Optimized for a wide range of tasks and activities, these general-purpose gloves are built from a durable, flexible fine-gauge nylon that delivers ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. An all-over nitrile coating repels oil, fuel, and other solvents, while an ergonomic design provides all day comfort.
-
Dexterity® S10LXPB
Product ID: S10LXPBSuperior puncture resistance with a strong, steady grip
Hypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.
-
Chemstop™ NIF3018SS
Product ID: NIF3018SSChemical-resistant gloves that eliminate paint spray back
These 18-mil thick gloves feature a nitrile coating that makes them fully resistant to chemicals, oils, fuels and solvents, optimizing them for spray paint jobs. A conductive silver strip on the palms electrically grounds workers to spray-paint guns to eliminate spray back, and an embossed finish provides a strong, steady grip. Their 12″ length provides forearms with excellent coverage.
-
Chemstop™ NIF3018
Product ID: NIF3018Chemical and puncture resistant gloves that provide a wide area of protection
Thanks to a nitrile coating, these 15mil thick gloves resist a wide range of chemicals and solvents including oil, fuel and methanol. Their embossed finish provides a steady grip and flock lining ensures comfort. An extended 12″ length provides a greater zone of coverage and ANSI Level A3 puncture resistance further protects hands.
-
Chemstop™ NI4622
Product ID: NI4622Nitrile-treated gloves that resist chemicals in a wide range of temperatures
These gloves are made from extra-thick, 22 mil nitrile that provides outstanding protection against chemicals and solvents and feature a 19″ length to provide extra coverage against splash. They can be utilized in temperatures ranging from -4°C to 149°C (25°F – 300°F) and come with an embossed finish that allows for a steadier grip.
-
Chemstop™ NI3012
Product ID: NI3012Chemical resistant gloves that keep hands safe in a wide range of temperatures
These flexible gloves are made from 12 mil thick nitrile for reliable resistance to chemicals, oil, fuel and organic solvents, and feature a 12″ length for wide-ranging protection. They’re able to safely perform in temperatures ranging from -4°C to 149°C (25°F – 300°F) and have been rated with ANSI Level 2 puncture resistance. An embossed finish guarantees a steady grip.
-
Chemstop™ NE250TRC
Product ID: NE250TRCChemical resistant, extended cuff gloves that guard against heat up to 204°C / 400°F
These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.
-
Chemstop™ L6043
Product ID: L604324" liquid-proof gloves that provide a high degree of chemical protection
With a total length of 24 inches, these extra-heavyweight natural rubber gloves provide a high degree of protection from chemicals and caustic substances. Their 7.5″ cuffs allow for easy on and off and they’re an excellent choice for sandblasting.
-
Superior Touch® S13SXGPU
Product ID: S13SXGPUCFIA-compliant gloves that match strength with touch sensitivity
These CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.
-
TenActiv™ STAGHVPN
Product ID: STAGHVPNHigh-visibility, cut-resistant gloves with an excellent grip
A stronger-than-steel TenActiv™ yarn gives these gloves ANSI Level A5 cut protection, and a hi-viz knit shell increases their visibility. A micropore nitrile coating ensures an excellent grip even on wet and oily surfaces, and a reinforced thumb crotch extends their lifespan by reducing wear in high-stress areas. They’re made touchscreen compatible so you never need to remove your gloves as you move between tasks.
-
TenActiv™ S13TAWFN
Product ID: S13TAWFNThe highest level of cut protection matched with superior dexterity
Rated ANSI Level A9 cut resistant, these TenActiv™ gloves are made from a 13-gauge construction that provides an extreme level of protection without sacrificing dexterity. A foam nitrile coating at the palms ensures a solid grip on lightly oiled parts. They’re designed to be fully launderable, allowing for a fast and convenient refresh, and an extended product life.
-
Chemstop™ NE240TKL
Product ID: 240TKLHeat resistant gloves that safeguard against chemicals
These heavy-duty neoprene gloves protect against a wide range of oils and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. Rated ANSI Level 3 resistant for protection up to 200°C / 392°F. Terry lining provides further protection from thermal contact and diamond-grip finish palms ensure a strong grip.
-
Chemstop™ N9B
Product ID: N9BPuncture resistant oil and grease-proof gloves
An all-over nitrile coating that resists oils, fuels and many organic solvents suit these heavy-duty gloves to applications involving oil and grease. Their cotton jersey support keeps hands comfortable and absorbs sweat. ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance provides added safety and protection.
-
Dexterity® S10LXQ
Product ID: S10LXQFlexible, puncture resistant gloves with a strong, steady grip
A latex palm coating provides these 10-gauge cotton polyester knit gloves with an outstanding grip in wet and dry conditions, as well as ANSI Level 4 puncture resistance and ANSI Level 4 abrasion resistance. Their high level of flexibility and comfortable ergonomic shape make them ideal general-purpose work gloves.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.