-
Dexterity® S15GPNVB
Product ID: S15GPNVBComfortable, cut resistant gloves with back of hand protection
These gloves match ANSI Level A5 cut protection with impact-resistant back of hand protection that delivers ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAGCTPU
Product ID: STAGCTPUGloves designed with zones that tear away to avoid hazardous snags in fast-moving rotational equipment
When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.
-
Chemstop™ S15KGVNVIB
Product ID: S15KGVNVIBHigh-performing vibration dampening with well rounded mechanical protection and dexterity
Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18TAXFN
Product ID: S18TAXFNHi-Viz cut protection with a strong grip and barehand feel
These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.
-
TenActiv™ S13TAXFN
Product ID: S13TAXFNTough knit gloves with a strong grip that guard against abrasion, cuts, and punctures
Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUHigh dexterity, cut-resistant gloves with enhanced comfort and a strong grip
These 18-gauge knit gloves feature a polyurethane coating that enhances dexterity and a bare-hand feel while also providing a strong and comfortable grip. Their naturally cool TenActiv™ yarn prevents hands from overheating while offering ANSI Level A4 cut protection. These gloves are an outstanding choice for jobs that require working with small parts where a strong grip is required.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut-resistant gloves for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPUCut resistant, versatile gloves with a strong grip and barehand feel
A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
TenActiv™ S13TAWFN
Product ID: S13TAWFNThe highest level of cut protection matched with superior dexterity
Rated ANSI Level A9 cut resistant, these TenActiv™ gloves are made from a 13-gauge construction that provides an extreme level of protection without sacrificing dexterity. A foam nitrile coating at the palms ensures a solid grip on lightly oiled parts. They’re designed to be fully launderable, allowing for a fast and convenient refresh, and an extended product life.
-
TenActiv™ S13TAPUCF
Product ID: S13TAPUCFTouchscreen compatible, cut resistant gloves that block static
Perfect for electronics manufacturing, these gloves are made from a 13-gauge TenActiv™-blended yarn that provides ANSI Level A2 cut protection, and also benefits from anti-static carbon filament. It’s polyurethane palm coating ensures a steady grip, and its touchscreen compatible design adds convenience.
-
TenActiv™ S13TAGPU
Product ID: S13TAGPUStronger-than-steel gloves with high cut resistance
Made from a lint-free continuous filament yarn that’s stronger than steel yet highly flexible, these TenActiv™ gloves provide outstanding dexterity. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut protection, and ANSI Level 3 puncture resistance. Polyurethane-coated palms ensure a secure grip and ergonomic shaping increases comfort.
-
TenActiv™ S13TAFNT
Product ID: S13TAFNTLong-lasting cut-resistant gloves with a strong grip
These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and have been treated with an active agent to achieve a 99.9% antimicrobial status
-
Superior Touch® S13SXPUQ
Product ID: S13SXPUQStrong yet lightweight Dyneema® gloves that provide cut and puncture resistance
These gloves are made from Dyneema®, an extremely strong yet lightweight fabric that’s cool to the touch, making them an excellent choice for work in hot environments. A snug fit, ergonomic shaping and a high level of breathability increase comfort, while a polyurethane palm coating provides outstanding dexterity and a steady grip. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut resistance, and ANSI Level 3 puncture resistance.
-
TenActiv™ S13TAFGPU
Product ID: S13TAFGPUComfortable, cut resistant gloves with a strong grip
A non-linting 13-gauge continuous filament yarn that’s stronger than steel provides these gloves with ANSI Level A3 cut resistance and ANSI Level 5 puncture resistance. Their polyurethane palm coatings ensure top-notch dexterity and a strong grip. A snug fit with ergonomic shaping provides hands with all-day comfort.
-
Superior Touch® S13PU
Product ID: S13PUSuperior dexterity with a bare hand feel and strong grip for precise handling
A fine-gauge nylon material and a snug, comfortable fit give these gloves a bare-hand feel with outstanding dexterity. A polyurethane palm coating increases grip, and their non-linting and non-marring qualities make them ideal for handling sensitive materials and glass.
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGPU
Product ID: S13KFGPUCut resistant gloves with a bare-hand feel and strong, steady grip
A flexible, fine gauge knit that offers ANSI Level A4 cut protection makes these non-marring gloves ideal for handling glass. They also feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Polyurethane-coated palms combine a strong, steady grip with a bare-hand feel. The gloves are ergonomically shaped for a close and comfortable fit.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A5 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.