-
Contender™ KGC1T
Product ID: KGC1TFlame-resistant sleeves that defend against cuts, punctures and abrasion
A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 1 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.
-
Contender™ KFG
Product ID: KFGCut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
Available in a tubular or tapered fit, with or without thumbholes, in a variety of sizes that range from 10″ to 22″
-
KeepKleen® RDNMD
Product ID: RDNMDMetal-detectable food safe disposable gloves for accidental contamination detection
Our KeepKleen® RDNMD metal-detectable disposable gloves help reduce costs associated with accidental contaminations and food waste. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78? to prevent food waste shutdowns by adding and additional layer of control. They are CFIA and FDA compliant for safe food handling with texturized fingertips for steady grip.
-
Endura® 398OBPB
Product ID: 398OBPBPuncture-resistant MIG welding gloves with cut and heat protection
Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 3 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A6 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.
Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) versions: one of the gloves in the pair features Punkban™ on the thumb and index finger for ANSI Level A5 hypodermic puncture resistance in these areas.
-
Endura® 378KGVB
Product ID: 378KGVBMedium-duty impact-resistant leather gloves with 360° cut protection
These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.
-
Endura® 378GOBFC
Product ID: 378GOBFCCrush-resistant leather finger cap gloves that protect fingertips from pinch-point hazards
Pinch-point hazards have met their match in these tough leather gloves equipped with crush-resistant finger caps that safeguard fingertips from crush, impact, cut, and puncture hazards while still allowing flexibility and movement needed for everyday work. Additional comfort is provided with a keystone thumb design and full cotton liner. Oilbloc™ treatment repels water and oil.
-
Endura® 378GKG4P
Product ID: 378GKG4PMulti-feature driver gloves with extreme impact resistance and arc flash protection
This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with ParaActiv™ engineered yarn . This feature-packed glove also includes vibration-dampening palms, is treated to resist water and liquids, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².
-
Dragon™ TK835LG2
Product ID: TK835LG2Triple-layer gloves for high ANSI 5 heat protection
A triple-layer construction that features a Twaron® outer shell, a 100% cotton terry liner and a leather lined front and back provides high ANSI 5 heat resistance. Their 4″ leather gauntlet cuffs provide extra protection to keep wrists safe.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated, heat resistant gloves with 360° cut protection
Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 4 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.
-
Dexterity® S13FNT
Product ID: S13FNTFlexible, nitrile-dipped work gloves with a strong grip
These nylon work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.
-
Chemstop™ NT230
Product ID: NT230Get a grip on oily/wet conditions with our unique Nitrile gloves and their crushed ceramic powder grip finish
Meeting the needs of industries such as petrochemical or automotive, these gloves feature a crushed ceramic-powder grip finish which provides fantastic grip in oily/wet conditions. They resist oils, greases, and organic solvents, all while furnishing excellent puncture, snag, abrasion resistance.
-
North Sea™ NS300B
Product ID: NS300BChemical-resistant gloves that provide a strong grip in cold conditions
These chemically resistant gloves feature a PVC formulation that provides outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions, and triple foam lining increases warmth. Safety cuffs and a shorter length allow for easy on and off.
-
North Sea™ N230FLK
Product ID: N230FLKFleece-lined fishing gloves that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.
-
North Sea™ N230FL
Product ID: N230FLFishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.
-
North Sea™ N230CR
Product ID: N230CROil resistant gloves that maintain a steady grip in cold conditions
Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Emerald CX® SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our Emerald CX® SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
Sure Knit™ STNCF
Product ID: STNCFTouch-screen compatible inspector gloves that block static shock
These seamless knit inspector gloves are made from nylon/carbon yarn with electrostatic dissipative properties to prevent shock. Knitwrist cuffs provide a secure, comfortable fit, and their touchscreen compatibility adds extra convenience. An excellent choice for electronics or commercial machinery manufacturing.
-
Sure Grip® SQD
Product ID: SQDSure-grip string knit glove optimized for diverse general purpose applications
This general-purpose work glove offers an excellent grip. These gloves are made with a 7-gauge string knit construction that provides outstanding durability and all-day comfort. More than 500 PVC dots adhered to the palm provide abrasion resistance while maximizing grip on both wet and dry surfaces. Great for use in construction and warehouse work.
-
Contender™ SPGRK4
Product ID: SPGRK4Dexterous, durable 360° cut protection
These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.
-
Cool Grip® SPGRK/A
Product ID: SPGRK/AProtection for handling moderately hot rubber and plastic
Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.
-
Contender™ SPGC2D
Product ID: SPGC2D360° cut protection combined with a strong, steady grip
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Contender™ SPGC
Product ID: SPGC360° cut protection matched with comfort and dexterity
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Superior® SNF
Product ID: SNFA comfortable fit that provides warmth in wet conditions
A highly durable polyester knit gives these versatile gloves an excellent level of dexterity and a comfortable fit, while their insulating properties mean they can keep hands warm even when wet. These gloves can be worn alone, or as a glove liner for any work that requires extra insulation in wet conditions. They’re fully launderable, allowing for fast and easy refresh.