Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • SUPERA™ WCKVFR

    Product ID: WCKVFR

    This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².

  • SUPERA™ NWKVFR

    Product ID: NWKVFR

    This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².

  • SUPERA™ BAKVFR

    Product ID: BAKVFR

    This fire-resistant (FR) balaclava is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².

  • Chemstop™ F236

    Product ID: F236

    Our Chemstop™ F236 gloves are designed to guard against chemicals and solvents.  PVC double-coated for longer wear life, the Chemstop™ F236 won’t stiffen in cold temperatures and features an anti-slip finish that ensures grip on wet surfaces.

  • Sure Knit™ CSTN120HF

    Product ID: CSTN120HF

    Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.

  • TenActiv™ KTAG18

    Product ID: KTAG18

    These tubular knit sleeves stay cool to provide long-lasting comfort in warm work conditions. Their tubular knit construction guards against abrasion hazards as well as dirt while providing ANSI Level A5 cut protection. Not intended for job sites that may pose a risk of sparks or flames.

  • Contender™ KPXWE

    Product ID: KPXWE

    Optimized for jobs with a high risk of exposure to sparks or flames, these tubular sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their STAYz-UP™ elastic armbands with polymer dots prevent slippage, while ANSI Level A2 cut protection defends arms from minor scrapes and cuts.

  • Contender™ KFGCM

    Product ID: KFGCM

    These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.

  • Dragon™ K825KP

    Product ID: K825KP

    Seamlessly knit from DuPont™ Kevlar® fiber, this glove from our Dragon™ series provides heat protection in temperatures up to 320°C / 608°F while preserving dexterity and comfort. Its 100% wool terry liner offers further protection from heat, making it ideal for use in injection molding or handling hot materials. It also offers ANSI Level A4 cut protection. Elasticized wrists guarantee a snug fit.

  • Superior® ML80K

    Product ID: ML80K

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They also benefit from knit wrists that ensure a snug fit, and stay in place while preventing debris from entering the glove.

  • Chemstop™ F294SL

    Product ID: F294SL

    When protection from chemicals is paramount, these PVC gloves that run to the shoulder are your first line of defense. Their double-dipped palms provide extra resistance to chemicals and solvents, and a flock-lined PVC material ensures they’re stiff enough to stay in place. Wide elastic straps that wrap around the neck further ensure the sleeves stay put. Aside from chemicals, they’ll also defend from oils, grease, acid, caustics, solvents, detergents, oxidation and water.

  • KeepKleen® BOOTPD18

    Product ID: BOOTPD18

    These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.

  • Superior® ADBP3828

    Product ID: ADBP3828

    This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.

  • Superior® A8BV4835

    Product ID: A8BV4835

    This apron is built from an 8mm thick vinyl that resists chemicals, detergents, oils and fats. Its reinforced grommets enhance durability, and plain edges make it easy to clean. It’s fully CFIA-compliant for safe food handling.

  • Endura® 505BUWS

    Product ID: 505BUWS

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • SnowForce™ SNOWD200L

    Product ID: SNOWD200L

    Designed with arctic winters in mind, these calfskin gloves provide crucial warmth in extreme cold. Their Temperloc lining ensures winter protection in temperatures down to -45°C / -49°F and can be easily removed for cleaning and drying. Elasticized wrists lock in heat and keep cold out, and their 6.5″ double layer nylon gauntlet cuffs have been designed to slide over snowmobile suits and parkas. They even feature a removable cheek warmer and pile wiper.

  • Endura® SPL4

    Product ID: SPL4

    Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.

  • Sure Knit™ SLSXB

    Product ID: SLSXB

    Ideal for food processing tasks that involve a high risk of lacerations, these fully washable sleeves provide ANSI Level A8 cut protection. Treated with an active agent to achieve 99.9% antimicrobial status, they can be safely laundered in temperatures up to 85°C / 185°F. An attachable clip at the bicep prevents slippage, while a latex-free construction reduces the risk of allergic reactions. At 21 inches in length, these sleeves provide maximum coverage. They are also FDA and CFIA-compliant.

  • Superior® SLPD16E

    Product ID: SLPD16E

    Made from 0.68 mils thick polyethylene and featuring heat-sealed elastic openings at the wrist and bicep, these sleeves protect from chemicals, oils, and grease, and are CFIA-compliant for safe food handling. They include a convenient, slip-on/slip-off fit and are available in white or blue for easy color coding.

  • Contender™ KPXT

    Product ID: KPXT

    Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.

  • Cutban™ KPW

    Product ID: KPW

    These tubular knit sleeves provide a comfortable yet durable fit. Made from double-layer, high-tenacity filament yarn that protects hands from cut hazards, they offering ANSI Level A2 cut protection. They’re fully launderable for easy refresh and available in five different lengths with optional thumbholes for added comfort and convenience.

  • Contender™ KAW1C10

    Product ID: KAW1C10

    Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

  • Contender™ KAWC

    Product ID: KAWC

    Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

  • Cool Grip® TBMOB

    Product ID: TBMOB

    These tough 17″ baker’s mitts are made from a preshrunk, heavyweight cotton and feature an Oilbloc™️ treatment that repels oil and water. They’re fully lined with 11oz of knit cotton for extra comfort and insulation and are fully CFIA-compliant for safe hood handling. Extra-strong, pre-serged inside seams and reinforced Twaron® thumb patches increase their lifespan.