Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Superior® LL80KSuperior® LL80K

    Superior® LL80

    Product ID: LL80

    Women's fit cotton/poly inspector gloves for contamination prevention

    These breathable medium weight inspectors gloves are designed to protect against fingerprints, hand oils, scratches, and other types of contamination. The cotton/poly jersey knit fabric is very form-fitting, and the slip-on style allows for easy donning. Hand-to-hand reversible, which helps to extend the life of the glove, they can also be worn as a liner beneath other gloves to soak up perspiration; especially effective when worn underneath rubber gloves. These gloves are also fully washable and can be No Bleached.

  • Endura® 76BFTL

    Product ID: 76BFTL

    Scrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.

  • Endura® 304BOA

    Product ID: 304BOA

    Durable mitts built for extreme cold weather protection down to -35°C / -31°F

    The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.

  • Superior® ML80K

    Product ID: ML80K

    Heavyweight inspector gloves with knit wrists for a close fit

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They also benefit from knit wrists that ensure a snug fit, and stay in place while preventing debris from entering the glove.

  • Chemstop™ F294SL

    Product ID: F294SL

    Stay-put chemical-resistant gloves that offer full-length arm protection

    When protection from chemicals is paramount, these PVC gloves that run to the shoulder are your first line of defense. Their double-dipped palms provide extra resistance to chemicals and solvents, and a flock-lined PVC material ensures they’re stiff enough to stay in place. Wide elastic straps that wrap around the neck further ensure the sleeves stay put. Aside from chemicals, they’ll also defend from oils, grease, acid, caustics, solvents, detergents, oxidation and water.

  • KeepKleen® BOOTPD18

    Product ID: BOOTPD18

    Extended coverage single-use boot covers that guard against contamination

    These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.

  • Superior® ADBP3828

    Product ID: ADBP3828

    Durable, 4-pocket denim apron with convenient tool storage

    This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.

  • Superior® A8BV4835

    Product ID: A8BV4835

    Easy-cleaning apron that resists chemicals, detergents, and oils

    This apron is built from an 8mm thick vinyl that resists chemicals, detergents, oils and fats. Its reinforced grommets enhance durability, and plain edges make it easy to clean. It’s fully CFIA-compliant for safe food handling. Ties at both the neck and back hold apron securely in place.

  • SnowForce™ SNOWD200L

    SnowForce™ SNOWD200L

    Product ID: SNOWD200L

    Insulated gauntlet gloves that provide winter protection down to -45°C / -49°F

    Designed with arctic winters in mind, these calfskin gloves provide crucial warmth in extreme cold. Their Temperloc lining ensures winter protection in temperatures down to -45°C / -49°F and can be easily removed for cleaning and drying. Elasticized wrists lock in heat and keep cold out, and their 6.5″ double layer nylon gauntlet cuffs have been designed to slide over snowmobile suits and parkas. They even feature a removable cheek warmer and pile wiper.

  • Endura® SPL4

    Product ID: SPL4

    High coverage welder's spats that guard against sparks and heat

    Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.

  • Cutban™ KPW

    Product ID: KPW

    Comfortable, cut-resistant tubular knit sleeves

    These tubular knit sleeves are made from recycled material and provide a comfortable yet durable fit. Made from double-layer, high-tenacity filament yarn that protects hands from cut hazards, they offering ANSI Level A2 cut protection. They’re fully launderable for easy refresh and available in five different lengths with optional thumbholes for added comfort and convenience.