Product ID: STAGCTPU
Gloves designed with zones that tear away to avoid hazardous snags in fast-moving rotational equipment
When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.
Product ID: 635CRYO
Waterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
Product ID: MMG
Chemical resistant chainmail gloves for extreme 360°cut resistance
A seamless chainmail construction made from stainless-steel rings provides 360° ANSI Level A9 cut protection. Aside from their powers to resist cuts, corrosion, fats and oils, the rings also provide a high level of flexibility and dexterity. The gloves can be easily cleaned in the sink and feature a bacteria-resistant wristband that reduces the risk of contamination. A convenient, hand reversible design provides ease of use. These gloves are also FDA and CFIA-compliant.
Product ID: 14012GH
Eliminate paint spray-back with this cleanroom compatible glove
Grounding yourself to a spray gun can be comfortable and functional when your hands are inside these solvent-resistant, cleanroom-compatible gloves. The secret? A highly conductive silver strip that runs along the inside surface of the palm to deliver the best possible grip. In addition, a double-faced hemmed cuff and lint-free materials keep particulate counts to the lowest possible level.
Product ID: NIF3018SS
Chemical-resistant gloves that eliminate paint spray back
These 18-mil thick gloves feature a nitrile coating that makes them fully resistant to chemicals, oils, fuels and solvents, optimizing them for spray paint jobs. A conductive silver strip on the palms electrically grounds workers to spray-paint guns to eliminate spray back, and an embossed finish provides a strong, steady grip. Their 12″ length provides forearms with excellent coverage.
Product ID: RDNMD
Metal detectable industrial grade disposable gloves with a strong wet/dry grip
These industrial grade disposable gloves are metal detectable to reduce costs associated with accidental contaminations and food waste. Designed with food industry workers in mind, they’re made from nitrile material, which is much stronger and more durable than vinyl. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78″ while texturized fingertips provide a strong, wet/dry grip. They’re entirely free of allergy causing rubber proteins and are hand to hand reversible for greater convenience. These gloves are also CFIA and FDA compliant.
Product ID: 385CS
Hi-Viz gloves that can stop a chain saw dead in its tracks
These gloves can stop a chain saw running at 3140 feet per minute. How? These gloves have been tested against European Standard EN 381-7. Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.
Product ID: HPNG
Your first line of defense against nail gun injuries
Intended to enhance existing hand protection, this nail gun hand pad features strategically placed ballistic plating to protect against misfires and malfunctions. Adjustable Velcro® fasteners comfortably secure the fit, and a reinforced thumb crotch increases durability and product longevity. Designed to supplement task-appropriate safety gloves, not a standalone solution.
Product ID: 76BNG
Fitter-style gloves that defend against nail gun injuries
Our Endura® 76BNG fitter style gloves feature strategically placed ballistic plating to protect against nail gun misfires and malfunctions. Palms, fingertips, and knuckles are reinforced with leather for durability while a safety cuff allows workers to don and remove the gloves with ease. Available in left-hand (Endura® 76BNGLH) and right-hand (Endura® 76BNGRH) versions.