Construction Hand Safety Guide and Products
Let us help you find the right hand and arm protection
VIEW ONLINE GUIDE-
Chemstop™ F236
Product ID: F236Economical anti-slip chemical-resistant gloves
Our Chemstop™ F236 gloves are designed to guard against chemicals and solvents. PVC double-coated for longer wear life, the Chemstop™ F236 won’t stiffen in cold temperatures and features an anti-slip finish that ensures grip on wet surfaces.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTDexterous, high level cut protection with a strong, steady grip
These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 5 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.
-
Chemstop™ F236
Product ID: F236Economical anti-slip chemical-resistant gloves
Our Chemstop™ F236 gloves are designed to guard against chemicals and solvents. PVC double-coated for longer wear life, the Chemstop™ F236 won’t stiffen in cold temperatures and features an anti-slip finish that ensures grip on wet surfaces.
-
Endura® 378GKGTVBE
Product ID: 378GKGTVBEVibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F
These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.
-
Endura® 378GKGVBE
Product ID: 378GKGVBEEconomic choice for shutdown and turnaround maintenance
Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.
-
Endura® 378GOBKL
Product ID: 378GOBKLTough multi-use gloves with cut and arc flash protection
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 40 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLWinter cut and arc flash protection retains warmth to -15°C / 5°F
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNStatic-blocking gloves with a soft, tactile feel and a strong grip
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. Treated with an active agent to achieve a 99.9% antimicrobial status, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
TenActiv™ STAGPNVPI
Product ID: STAGPNVPICut protection meets vibration dampening
The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A5 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.
-
Chemstop™ F236
Product ID: F236Economical anti-slip chemical-resistant gloves
Our Chemstop™ F236 gloves are designed to guard against chemicals and solvents. PVC double-coated for longer wear life, the Chemstop™ F236 won’t stiffen in cold temperatures and features an anti-slip finish that ensures grip on wet surfaces.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin FR gloves are an economic choice that protects against arc flash, cuts, and flame. Arc flash-rated level 3 with an ATPV of 36 cal / cm² and passes the ASTM vertical flame resistance test, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378GKGTL
Product ID: 378GKGTLWinter gloves for extreme cold where high cut hazards are present
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -30°C / -²²°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
Endura® 378GOBKL
Product ID: 378GOBKLTough multi-use gloves with cut and arc flash protection
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 40 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLWinter cut and arc flash protection retains warmth to -15°C / 5°F
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Endura® 375KGVB
Product ID: 375KGVBGoatskin driver gloves that safeguard against cuts and slips
The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture protection. An Oilbloc™ treatment assures the highest level of oil and water resistance, and reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.
-
Endura® 378GKGVB
Product ID: 378GKGVBArc Flash-rated cut resistant driver gloves that protect against sparks and flame
These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A5 cut protection while defending against impact injuries. They’ve received an Oilbloc™ treatment which prevents oils and liquids from soaking into the leather, and a padded palm increases durability while suppressing vibrations. A level 3 Arc Flash testing rating ensures protection from sparks and flame.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
KeepKleen® RD8NPF
Product ID: RD8NPFDurable disposables - 8 mil Powder-free Nitrile Industrial Grade Gloves
Made with thicker nitrile for better puncture resistance, these industrial grade disposable gloves contain no natural rubber latex that may cause allergies. Ambidextrous and powder-free, these gloves are suited for food, parts handling, janitorial, painting/finishing, and tattoo/piercing applications.
-
TenActiv™ KTAG1T
Product ID: KTAG1TCooling, cut-resistant sleeves
These cool-to-the-touch sleeves provide relief from the heat while ensuring ANSI Level A2 cut protection. Thanks to their STAYz-UP™ elasticized armbands, sleeves will stay in place to provide all-day arm protection from cuts, dirt, and abrasion.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNStatic-blocking gloves with a soft, tactile feel and a strong grip
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. Treated with an active agent to achieve a 99.9% antimicrobial status, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
KeepKleen® RD8NPF
Product ID: RD8NPFDurable disposables - 8 mil Powder-free Nitrile Industrial Grade Gloves
Made with thicker nitrile for better puncture resistance, these industrial grade disposable gloves contain no natural rubber latex that may cause allergies. Ambidextrous and powder-free, these gloves are suited for food, parts handling, janitorial, painting/finishing, and tattoo/piercing applications.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
Endura® 378GOBKL
Product ID: 378GOBKLTough multi-use gloves with cut and arc flash protection
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 40 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
-
TenActiv™ KTAG1T
Product ID: KTAG1TCooling, cut-resistant sleeves
These cool-to-the-touch sleeves provide relief from the heat while ensuring ANSI Level A2 cut protection. Thanks to their STAYz-UP™ elasticized armbands, sleeves will stay in place to provide all-day arm protection from cuts, dirt, and abrasion.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNStatic-blocking gloves with a soft, tactile feel and a strong grip
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. Treated with an active agent to achieve a 99.9% antimicrobial status, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTDexterous, high level cut protection with a strong, steady grip
These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 5 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin FR gloves are an economic choice that protects against arc flash, cuts, and flame. Arc flash-rated level 3 with an ATPV of 36 cal / cm² and passes the ASTM vertical flame resistance test, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378GKGTL
Product ID: 378GKGTLWinter gloves for extreme cold where high cut hazards are present
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -30°C / -²²°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
Endura® 378GKGVBE
Product ID: 378GKGVBEEconomic choice for shutdown and turnaround maintenance
Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ STAGPNVPI
Product ID: STAGPNVPICut protection meets vibration dampening
The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A5 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin FR gloves are an economic choice that protects against arc flash, cuts, and flame. Arc flash-rated level 3 with an ATPV of 36 cal / cm² and passes the ASTM vertical flame resistance test, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378GKGTL
Product ID: 378GKGTLWinter gloves for extreme cold where high cut hazards are present
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -30°C / -²²°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTDexterous, high level cut protection with a strong, steady grip
These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 5 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.
-
Contender™ KAWC
Product ID: KAWCCut-resistant sleeves that guard against sparks, flames, and heat
Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI A² cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut resistant gloves with a true fit and tactile feel
Knit from a blend of steel, HPPE and composite filament fiber, these gloves feature ANSI Level A5 cut protection. A touch of spandex provides comfort and a true fit, while a polyurethane palm coating gives them a close, bare hand feel that’s ideal for sensitive jobs.
-
Endura® 378GOBKL
Product ID: 378GOBKLTough multi-use gloves with cut and arc flash protection
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 40 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLWinter cut and arc flash protection retains warmth to -15°C / 5°F
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
TenActiv™ STAGPNVPI
Product ID: STAGPNVPICut protection meets vibration dampening
The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A5 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.
-
KeepKleen® RD8NPF
Product ID: RD8NPFDurable disposables - 8 mil Powder-free Nitrile Industrial Grade Gloves
Made with thicker nitrile for better puncture resistance, these industrial grade disposable gloves contain no natural rubber latex that may cause allergies. Ambidextrous and powder-free, these gloves are suited for food, parts handling, janitorial, painting/finishing, and tattoo/piercing applications.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut resistant gloves with a true fit and tactile feel
Knit from a blend of steel, HPPE and composite filament fiber, these gloves feature ANSI Level A5 cut protection. A touch of spandex provides comfort and a true fit, while a polyurethane palm coating gives them a close, bare hand feel that’s ideal for sensitive jobs.
-
Contender™ KAWC
Product ID: KAWCCut-resistant sleeves that guard against sparks, flames, and heat
Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI A² cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBBreathable impact and cut resistance with a superior grip
These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNStatic-blocking gloves with a soft, tactile feel and a strong grip
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. Treated with an active agent to achieve a 99.9% antimicrobial status, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
Chemstop™ F236
Product ID: F236Economical anti-slip chemical-resistant gloves
Our Chemstop™ F236 gloves are designed to guard against chemicals and solvents. PVC double-coated for longer wear life, the Chemstop™ F236 won’t stiffen in cold temperatures and features an anti-slip finish that ensures grip on wet surfaces.
-
Endura® 378GOBKL
Product ID: 378GOBKLTough multi-use gloves with cut and arc flash protection
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 40 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLWinter cut and arc flash protection retains warmth to -15°C / 5°F
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut resistant, puncture resistant reinforced gloves with an excellent grip
These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin FR gloves are an economic choice that protects against arc flash, cuts, and flame. Arc flash-rated level 3 with an ATPV of 36 cal / cm² and passes the ASTM vertical flame resistance test, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378GKGTL
Product ID: 378GKGTLWinter gloves for extreme cold where high cut hazards are present
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -30°C / -²²°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
TenActiv™ S18TAFG
Product ID: S18TAFGTop-notch cut protection matched with superior dexterity
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel yet conforms to the hand for an unparalleled level of dexterity. Wear them alone for work that requires a highly tactile touch and 360° ANSI Level A4 cut protection or utilize them as liners worn under another pair of gloves for added cut resistance.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.