Endura®

Goatskin Low-Voltage Cut-Resistant Rubber Glove Protectors

Product ID: 6CH5SKG

  • Tailored cover glove fits over low-voltage rubber gloves -Class 0
  • Meets ASTM Standard F696-06
  • Goatskin leather is economical with a great balance between strength and durability while having a soft, flexible feel
  • Gunn-cut styling removes seams from wear areas for greater durability

Warning: Leather protectors provide only mechanical protection for rubber insulating gloves, and when used alone do not provide any protection against serious injury, death or other potential dangers from electrical shocks and burns. Leather protector gloves must always be used, and are to be worn over the rubber insulating gloves. The protector should be inspected the same time the rubber gloves are inspected. Look for metal particles, embedded wire, abrasive materials or any substance that could cause puncture, abrasion, contamination or deterioration. Adequate flashover distance between the top of the protector and bead of the rubber gloves should be maintained. The minimum recommended uncovered distance is one inch for each 10,000 volts.

  • ANSI Cut Level A4
  • ANSI Puncture Level 4

Description

  • Tailored cover glove fits over low-voltage rubber gloves -Class 0
  • Meets ASTM Standard F696-06
  • Goatskin leather is economical with a great balance between strength and durability while having a soft, flexible feel
  • Gunn-cut styling removes seams from wear areas for greater durability

Warning: Leather protectors provide only mechanical protection for rubber insulating gloves, and when used alone do not provide any protection against serious injury, death or other potential dangers from electrical shocks and burns. Leather protector gloves must always be used, and are to be worn over the rubber insulating gloves. The protector should be inspected the same time the rubber gloves are inspected. Look for metal particles, embedded wire, abrasive materials or any substance that could cause puncture, abrasion, contamination or deterioration. Adequate flashover distance between the top of the protector and bead of the rubber gloves should be maintained. The minimum recommended uncovered distance is one inch for each 10,000 volts.

Applications

  • Utilities

Sizing

  • 9
  • 10
  • 11
>

Not what you were looking for?

Use our glove selector to find an exact match.

Glove Selector