-
SUPERA™ HA10FR
Product ID: HA10FRFire-resistant and hi-viz outdoor winter headwear
Our fire-resistant Supera™ HA10FR beanie is designed for maximum comfort and all-day wear, protecting head and ears from the elements. Made with fabric with inherent FR properties that won’t diminish with laundering, it’s ideal for outdoor work and an excellent choice for construction, mining, utility work, and various jobs in oil & gas. Available in two colors: hi-viz orange (HA10FRO) and hi-viz green (HA10FRG).
-
Superior® HBA17
Product ID: HBA17Knit balaclava cover to secure hard hat in place and keep face, neck, and head warm
Our Superior® HB17 hard hat balaclava cover is designed to insulate the entire head against the cold while keeping a hard hat in place. Ideal for outdoor work, it fits snugly over a hard hat to seal out any draft and protects your face and neck. Available in three colors: black (HBA17B), hi-viz orange (HBA17O), and hi-viz green (HBA17G).
-
Superior® HHA7
Product ID: HHA7Knit cover to secure hard hat in place and keep head warm
Our Superior® HHA7 hard hat cover designed to insulate ears and head against the cold. Ideal for outdoor work, it easily slips on and fits snugly over a hard hat to keep in place. Available in three colors: black (HHA7B), hi-viz orange (HHA7O), and hi-viz green (HHA7G).
-
SUPERA™ BNKVFR
Product ID: BNKVFRFire-resistant watch cap that is ultra soft for use with hard hats and headwear
This fire-resistant (FR) cap features a brimless design to fit comfortably underneath hard hats or other headwear. It offers maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. The fabric features inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
Superior® CGB22
Product ID: CGB22Canvas bag for storing voltage insulating rubber gloves
Our Superior® CGB22 bag features 2 compartments for safe storage of voltage insulating gloves. The cotton canvas construction helps protect the rubber material from hazards that can significantly impact their integrity and extend the longevity of each pair.
-
Superior® EGS
Product ID: EGSScratch-resistant and high-impact protective eyewear
Our Superior® EGS protective eyewear is designed to keep eyes safe from impacts and common injury hazards. The scratch-resistant lenses wrap around the eyes to avoid injury caused by splashes, debris, and other irritants. Designed to fit different facial profiles, the temple lengths can be adjusted to the wearer’s needs while soft nose pads reduce slippage for a more comfortable and secure fit.
-
Superior® EGO
Product ID: EGOScratch and impact-resistant eyewear with ultraviolet protection
Our Superior® EGO protective eyewear features high impact and scratch-resistant lenses to protect eyes from common outdoor injury hazards. With ultraviolet resistance, the polycarbonate lenses block out more than 99.9% of UV-A and UV-B light that can harm the retina while keeping eyes safe from debris, splashes, and other irritants. Flexible temple slots conform to fit any facial profile while soft nose pads reduce slippage for a more comfortable fit. Includes break away black cord.
CSA/Z94.3:20, ANSI/ISEA Z87.1-2015
-
Sure Knit™ CSTN120HF
Product ID: CSTN120HFCleanroom-processed fingerless inspector gloves
Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.
-
Contender™ KPXW
Product ID: KPXWETubular sleeves made with material designed to resist flame and sparks plus incidental cut resistance
Our Contender™ KPXW tubular sleeves protect against incidental cut hazards and designed to resist sparks and flame. They provide 360° cut protection with low ANSI A2 cut resistance and are made from single-layer BlazeActiv™ fiber that is known to resists burns, melting, and dripping when exposed to flame. Elastic grip at bicep helps secure sleeves in place.
Available with standard size elastic bands (KPXW) or thick elastic bands (KPXWE) for better grip at bicep, with or without thumbholes, in a variety of sizes that range from 10 inches to 22 inches in length.
-
SUPERA™ WCKVFR
Product ID: WCKVFRNon-irritating fire-resistant watch cap for protection against fire hazards
Our SUPERA™ WCKVFR watch cap is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this watch cap is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ NWKVFR
Product ID: NWKVFRNon-irritating fire-resistant neck warmer for protection against fire hazards
Our SUPERA™ NWKVFR neck warmer is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this neck warmer is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Chemstop™ NE246FFL
Product ID: NE246FFLHeat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks
Our Chemstop™ NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.
-
Sure Knit™ STN120HF
Product ID: STN120HFOpen-finger low-linting inspector gloves for the highest level of touch sensitivity
Our Sure Knit™ STN120HF inspector gloves feature an open-finger design for unobstructed touch sensitivity. Made from nylon for comfort, the finger openings are specially processed to prevent loose fibers from shedding material and help prevent contamination.
-
Superior® ML80
Product ID: ML80Reversible low-lint inspection gloves
Our Superior® ML80 reversible inspection gloves feature a cotton blend that is low-linting to avoid shedding material and contamination. Reversible for ease of use, they’re ideal for assembly tasks and inspection lines. They can be used on their own or worn as a liner under other safety gloves for extra warmth.
-
Superior® ML40
Product ID: ML40Economic choice for lightweight and reversible low-lint inspection gloves
Our economical Superior® ML40 reversible inspection gloves feature a lightweight cotton blend that provides better dexterity and maximizes touch sensitivity. Low-linting to avoid shedding material and prevent contamination, they are reversible for ease of use. Ideal for assembly tasks and inspection lines, the can be worn as a liner under other safety gloves for extra warmth.
-
Superior® LL80
Product ID: LL80Slim-fit reversible low-lint inspection gloves
Our Superior® LL80 reversible inspection gloves are designed for a slim fit and feature a cotton blend that is low-linting to avoid shedding material and contamination. They are reversible for ease of use, making them ideal for assembly tasks and inspection lines. They can be worn on their own or as a liner under other safety gloves for extra warmth.
-
Superior® ML80K
Product ID: ML80KReversible low-lint inspection gloves with ribbed cuffs
Our Superior® ML80K reversible inspection gloves feature a cotton blend that is low-linting to avoid shedding material and contamination plus ribbed cuffs for warmth. They are reversible for ease of use, making them ideal for assembly tasks and inspection lines. They can be worn as a liner under other safety gloves for extra warmth.
-
KeepKleen® BOOTPD18
Product ID: BOOTPD18Extended coverage single-use boot covers that guard against contamination
These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.
-
Superior® ADBP3828
Product ID: ADBP3828Durable, 4-pocket denim apron with convenient tool storage
This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.
-
Superior® A8BV4835
Product ID: A8BV4835Easy-cleaning apron that is food safe and resists chemicals, detergents, and oils
Our Superior® A8BV4835 food safe vinyl apron is easy to clean and offers resistance to chemicals, oils, detergents, and fats. Its reinforced grommets enhance durability, and the plain edges allow easy cleaning. CFIA-compliant for safe food handling and offers a secure fit with fasteners around the neck and back to hold the apron in place.
-
Endura® SPL4
Product ID: SPL4Welder's spats that protect against sparks and heat
Our Endura® SPL4 welder’s spats protect feet and shins from sparks and heat. They feature a wide elastic sole strap with an closure for a quick, easy fit. An extended 6.5-inch height offers added protection and they’re sewn with ParaActiv™ fiber for added seam integrity.
Close
