-
North Sea™ N230CR
Product ID: N230CROil resistant gloves that maintain a steady grip in cold conditions
Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Emerald CX® SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our Emerald CX® SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
Sure Knit™ STNCF
Product ID: STNCFTouch-screen compatible inspector gloves that block static shock
These seamless knit inspector gloves are made from nylon/carbon yarn with electrostatic dissipative properties to prevent shock. Knitwrist cuffs provide a secure, comfortable fit, and their touchscreen compatibility adds extra convenience. An excellent choice for electronics or commercial machinery manufacturing.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling
Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTExtreme cut protection with reinforced nitrile thumb crotch for material handling and longevity
These gloves are made with TenActiv™ engineered yarn that provides 360° cut protection with extreme ANSI A7 cut resistance while a nitrile reinforced thumb crotch protects against wear and tear when material handling. Their micropore nitrile palm coating offers steady wet grip and is touchscreen compatible for moving between tasks.
-
Sure Grip® SQD
Product ID: SQDSure-grip string knit glove optimized for diverse general purpose applications
This general-purpose work glove offers an excellent grip. These gloves are made with a 7-gauge string knit construction that provides outstanding durability and all-day comfort. More than 500 PVC dots adhered to the palm provide abrasion resistance while maximizing grip on both wet and dry surfaces. Great for use in construction and warehouse work.
-
Contender™ SPGRK4
Product ID: SPGRK4Dexterous, durable 360° cut protection
These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.
-
Cool Grip® SPGRK/A
Product ID: SPGRK/AProtection for handling moderately hot rubber and plastic
Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.
-
Contender™ SPGC2D
Product ID: SPGC2D360° cut protection combined with a strong, steady grip
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Contender™ SPGC
Product ID: SPGC360° cut protection matched with comfort and dexterity
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Superior® SNF
Product ID: SNFA comfortable fit that provides warmth in wet conditions
A highly durable polyester knit gives these versatile gloves an excellent level of dexterity and a comfortable fit, while their insulating properties mean they can keep hands warm even when wet. These gloves can be worn alone, or as a glove liner for any work that requires extra insulation in wet conditions. They’re fully launderable, allowing for fast and easy refresh.
-
Cool Grip® SKX-W4
Product ID: SKX-W4360°cut protection matched with heat resistance and added forearm protection
These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance. They feature 4″ gauntlet cuffs for enhanced forearm protection. Their 100% knit terry liner traps air in to provide further protection from thermal contact. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.
-
Contender™ SKGCXPS
Product ID: SKGCXPSMaximum cut-resistant gloves for tasks that don’t require a strong grip
Our Contender™ SKGCXPS gloves are flexible and comfortable and offer maximum cut resistance. ParaActiv™ engineered yarn liner that provides 360° cut protection with extreme ANSI A9 cut resistance. Reinforced thumb crotch stitching improves overall lifespan and protects against wear and tear.
-
Dexterity® SKFGFNLTC
Product ID: SKFGFNLTC360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 2 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.
-
Emerald CX® SCXTAPVC
Product ID: SCXTAPVCHigh 360° cut protection gloves that keep hands warm and dry down to -5°C / 23°F
A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / 23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.
-
Sure Knit™ S13TP3K
Product ID: S13TP3KTrue fit, non-linting close-inspection gloves
These gloves have been designed to effectively carry out close inspections after a manufactured piece has been painted. Their light liner and THT® True Hand Technology offer a close, tactile, fit, making it easy to identify defects by feel. A low-lint polyester prevents dusts or particles from contaminating objects, making these gloves an ideal choice for working with electronics.
-
Sure Knit™ S13TN3K
Product ID: S13TN3KFilament Low-lint Polyester String-Knit Gloves
These fine knit gloves are made from lint free continuous filament yarns. They feature an extended knit wrist cuff for stay-in-place comfort. Ideal for automotive, paint line, electronics, and cleanroom applications.
-
Sure Knit™ S13SXB
Product ID: S13SXBSafe food handling gloves with extreme cut protection
Our food safe Sure Knit™ gloves offer 360° cut protection with extreme ANSI A7 cut resistance for safe food handling where cut hazards are present. They’re full launderable for easy refresh and have been treated with Size-Lock™ to prevent shrinkage. An active agent treatment keeps them safe from bacterial growth, and latex-free construction makes them allergen-friendly.
-
Sure Knit™ S13FRT
Product ID: S13FRTInsulated, flame-resistant liner gloves
A soft, seamless fit and a thin knit shell make these flame-resistant Protex® gloves ideal for liner use. They won’t melt or adhere to the skin under exposure to heat or direct flame and offer excellent insulation. They’re machine washable and quick-drying for easy refresh, and are constructed of latex free materials to prevent allergic reactions.
-
Superior Touch® S13DY
Product ID: S13DYDexterous, cut resistant inspector gloves
These fine, 13-gauge knit gloves feature elasticized cuffs for a close, comfortable fit and high levels of flexibility and dexterity. They can be worn on their own as inspector gloves or used as liners for extra cut-resistance. Their HPPE glove body provides ANSI Level 2 abrasion resistance and 360° ANSI Level A2 cut protection.
Also available with Sure Grip® PVC dots (#S13DYD)
-
Sure Knit™ S13CL
Product ID: S13CLTouch sensitive, snag resistant gloves
These Sure Knit™ gloves are made from a fine, 13-gauge blend of cotton, Lycra and Spandex that’s incredibly lightweight and unlikely to snag. Their extremely close fit provides a high level of dexterity and touch sensitivity, making them an optimal match for any job involving small parts assembly. They can also be worn as a liner under other gloves for extra warmth.
-
Dexterity® S13BFNVB
Product ID: S13BFNVBMoisture wicking, impact resistant work gloves
These foam nitrile-dipped nylon work gloves provide impact-resistant back-of-the-hand protection and a fast-drying, moisture-wicking seamless-knit shell. They feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance and maintain a steady grip in light oil conditions. They also provide hands with a full range of motion and all-day comfort.
-
Sure Knit™ S10SXB
Product ID: S10SXBTop level 360° cut resistant gloves for safe food handling
These durable gloves offer 360° ANSI Level A8 cut protection, making them an optimal choice for any food-handling tasks that involve blades. They’ve been treated with an active agent to achieve a 99.9% antimicrobial status, and a shrink-preventing Size-Lock™ treatment makes them fully launderable for easy cleaning. The gloves are also touchscreen compatible and free of latex to prevent allergic reactions. These gloves are also available in a similar version with a 6-inch long cuff (#S10SXB6).
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.