Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Endura® 378KGVB

    Product ID: 378KGVB

    Medium-duty impact-resistant leather gloves with 360° cut protection

    These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.

  • Endura® 378GOBFC

    Product ID: 378GOBFC

    Crush-resistant leather finger cap gloves that protect fingertips from pinch-point hazards

    Pinch-point hazards have met their match in these tough leather gloves equipped with crush-resistant finger caps that safeguard fingertips from crush, impact, cut, and puncture hazards while still allowing flexibility and movement needed for everyday work. Additional comfort is provided with a keystone thumb design and full cotton liner. Oilbloc™ treatment repels water and oil.

  • Endura® 378GKG4P

    Product ID: 378GKG4P

    Multi-feature driver gloves with extreme impact resistance and arc flash protection

    This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².

  • Cool Grip® SPGC/A

    Product ID: SPGC/A

    Insulated, heat resistant gloves with 360° cut protection

    Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.

  • TenActiv™ S13TAGPU

    Product ID: S13TAGPU

    Stronger-than-steel gloves with high cut resistance

    Made from a lint-free continuous filament yarn that’s stronger than steel yet highly flexible, these TenActiv™ gloves provide outstanding dexterity. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut protection, and ANSI Level 3 puncture resistance. Polyurethane-coated palms ensure a secure grip and ergonomic shaping increases comfort.

  • TenActiv™ S13TAFNT

    Product ID: S13TAFNT

    Long-lasting cut-resistant gloves with a strong grip

    These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and have been treated with an active agent to achieve a 99.9% antimicrobial status

  • Superior Touch® S13PUCF

    Product ID: S13PUCF

    Tactile gloves with a strong grip that stop static in its tracks

    These Superior Touch® gloves benefit from a carbon filament that grounds energy and prevents static charges from building, making them an ideal choice for working with electronics. Their continuous-filament nylon knit also provides outstanding touch sensitivity and durability, and a polyurethane palm coating provides a strong grip. They’re lint-free and non-marring, suiting them to work with glass and other delicate materials.

  • Dexterity® S13KFGPU

    Product ID: S13KFGPU

    Cut resistant gloves with a bare-hand feel and strong, steady grip

    A flexible, fine gauge knit that offers ANSI Level A4 cut protection makes these non-marring gloves ideal for handling glass. They also feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Polyurethane-coated palms combine a strong, steady grip with a bare-hand feel. The gloves are ergonomically shaped for a close and comfortable fit.

  • Dexterity® S13KFGFNT

    Product ID: S13KFGFNT

    360° cut protection matched with a strong, steady grip

    These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces.  A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.

  • Dexterity® S13FNT

    Product ID: S13FNT

    Flexible, nitrile-dipped work gloves with a strong grip

    These nylon work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.

  • Chemstop™ NT230

    Product ID: NT230

    Get a grip on oily/wet conditions with our unique Nitrile gloves and their crushed ceramic powder grip finish

    Meeting the needs of industries such as petrochemical or automotive, these gloves feature a crushed ceramic-powder grip finish which provides fantastic grip in oily/wet conditions. They resist oils, greases, and organic solvents, all while furnishing excellent puncture, snag, abrasion resistance.

  • North Sea™ N230FLK

    Product ID: N230FLK

    Fleece-lined fishing gloves that provide winter protection down to -15°C / 5°F

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.

  • North Sea™ N230FL

    Product ID: N230FL

    Fishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.

  • North Sea™ N230CR

    Product ID: N230CR

    Oil resistant gloves that maintain a steady grip in cold conditions

    Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.

  • Contender™ TRFGK

    Product ID: TRFGK

    Heat and cut protection for fabrication and handling hot unfinished metal

    Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.

  • Emerald CX® SWTACSL

    Product ID: SWTACSL

    Extreme durability and comfort matched with 360° cut resistance

    Made from a tough blend of TenActiv™, steel and composite filament fiber, these durable gloves offer 360° ANSI Level A6 cut protection. They also feature an inner cotton liner that keeps hands dry and comfortable and have been treated with Size-Lock™ to prevent shrinkage even with regular washing.

  • Sure Knit™ STNCF

    Product ID: STNCF

    Touch-screen compatible inspector gloves that block static shock

    These seamless knit inspector gloves are made from nylon/carbon yarn with electrostatic dissipative properties to prevent shock. Knitwrist cuffs provide a secure, comfortable fit, and their touchscreen compatibility adds extra convenience. An excellent choice for electronics or commercial machinery manufacturing.

  • TenActiv™ STACXPURT

    Product ID: STACXPURT

    Cut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling

    Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.

  • TenActiv™ STACXPNRT

    Product ID: STACXPNRT

    Extreme cut protection with reinforced nitrile thumb crotch for material handling and longevity

    These gloves are made with TenActiv™ engineered yarn that provides 360° cut protection with extreme ANSI A7 cut resistance while a nitrile reinforced thumb crotch protects against wear and tear when material handling. Their micropore nitrile palm coating offers steady wet grip and is touchscreen compatible for moving between tasks. These gloves are made with biodegradable materials.

  • Sure Grip® SQD

    Product ID: SQD

    Sure-grip string knit glove optimized for diverse general purpose applications

    This general-purpose work glove offers an excellent grip. These gloves are made with a 7-gauge string knit construction that provides outstanding durability and all-day comfort. More than 500 PVC dots adhered to the palm provide abrasion resistance while maximizing grip on both wet and dry surfaces. Great for use in construction and warehouse work.

  • Contender™ SPGRK4

    Product ID: SPGRK4

    Dexterous, durable 360° cut protection

    These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.

  • Cool Grip® SPGRK/A

    Product ID: SPGRK/A

    Protection for handling moderately hot rubber and plastic

    Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.

  • Contender™ SPGC2D

    Product ID: SPGC2D

    360° cut protection combined with a strong, steady grip

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.

  • Contender™ SPGC

    Product ID: SPGC

    360° cut protection matched with comfort and dexterity

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.