Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE

  • TenActiv™ STAGCTPU

    Product ID: STAGCTPU

    Gloves designed with zones that tear away to avoid hazardous snags in fast-moving rotational equipment

    When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.

  • Chemstop™ S15KGVNVIB

    Product ID: S15KGVNVIB

    High-performing vibration dampening with well rounded mechanical protection and dexterity

    Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.

  • Endura® 378GTXOT

    Product ID: 378GTXOT

    Get a grip on protection without sacrificing comfort

    For users in warm environment industries, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable and more breathable than other liner materials. These gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4.  They also incorporate our patent pending palm-grip technology to improve dexterity and durability.

  • TenActiv™ KTAG

    Product ID: KTAG

    Stay Cool and Cut-resistant sleeves

    These tubular knit sleeves stay cool to provide long-lasting comfort in warm work conditions. Their tubular knit construction guards against abrasion hazards as well as dirt while providing ANSI Level A5 cut protection. Not intended for job sites that may pose a risk of sparks or flames.

  • TenActiv™ KTAFGT

    Product ID: KTAFGT

    Silicone-free, highly cut-resistant sleeves that stay put

    Designed with sheet metal handling in mind, these sleeves are made from a stronger-than-steel TenActiv™ yarn that provides ANSI Level A5 cut protection. Elasticized armbands with grip-improving polymer dots and thumbholes keep sleeves in place, while a silicone-free construction optimizes them for working with metals that will later be painted.

  • TenActiv™ S13TAXFN

    Product ID: S13TAXFN

    Tough knit gloves with a strong grip that guard against abrasion, cuts, and punctures

    Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Endura® 378GKG4P

    Product ID: 378GKG4P

    Multi-feature driver gloves with extreme impact resistance and arc flash protection

    This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².

  • Dragon™ TK835LG2

    Product ID: TK835LG2

    Triple-layer gloves for high heat protection up to (320°C) 608°F

    A triple-layer construction that features a Twaron® outer shell, a 100% cotton terry liner and a leather lined front and back allows these gloves to work safely in temperatures of up to 608°F (320°C). Their 4″ leather gauntlet cuffs provide extra protection to keep wrists safe.

  • Emerald CX® SCXPNTFC

    Product ID: SCXPNTFC

    Top level 360° cut protection and a strong grip meets liquid resistance

    These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.

  • Chemstop™ S15KGV30N

    Product ID: S15KGV30N

    Guard against chemical exposure while protecting against cuts

    When a job presents the risk of cuts and chemical exposure, these Chemstop™ gloves should be your first line of defense. They’re fully aramid lined for ANSI Level A5 cut protection and feature a red PVC base coating that guards against chemicals and solvents. Gauntlet cuffs provide additional protection to the forearms, and a black nitrile coating that resists oil ensures a steady grip even on slick surfaces. They’re ergonomically shaped for high levels of comfort and dexterity.

  • Contender™ TRFGK

    Product ID: TRFGK

    High heat and cut-resistant gloves with a grip that doesn’t quit

    Intended for use in metal stamping, these gloves are made from a terry knit fabric with a composite filament fiber that provides 360° ANSI Level A5 cut protection and ANSI Level 5 heat resistance. The longer length of its knit-wrist cuffs increases comfort, and cotton interwoven into the fabric blend absorbs grease and oil for a strong grip.

  • TenActiv™ STAGXPU

    Product ID: STAGXPU

    Cut resistant gloves with a true fit and tactile feel

    Knit from a blend of steel, HPPE and composite filament fiber, these gloves feature ANSI Level A5 cut protection. A touch of spandex provides comfort and a true fit, while a polyurethane palm coating gives them a close, bare hand feel that’s ideal for sensitive jobs.

  • TenActiv™ STAGPN

    Product ID: STAGPN

    Cut resistant gloves with a strong and steady grip

    These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.

  • TenActiv™ STAFGPU

    Product ID: STAFGPU

    Soft, comfortable gloves with a high level of cut protection

    These gloves feature a soft polyurethane palm coating that provides excellent grip and a high level of comfort. Their TenActiv™ yarn ensures ANSI Level A5 cut protection, and a 13-gauge knit delivers ANSI Level 4 abrasion resistance without sacrificing dexterity. Well-suited to a wide variety of tasks, from rubber and plastics manufacturing to general warehouse use.

  • Emerald CX® SCXTAPVC

    Product ID: SCXTAPVC

    High 360° cut protection gloves that keep hands warm and dry down to -5°C / 23°F

    A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / 23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.

  • Clutch Gear® MXGKGHVB

    Product ID: MXGKGHVB

    High-visibility mechanic gloves with outstanding dexterity and 360° cut protection

    Built from tough goatskin, these gloves feature impact resistant back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level A5 cut protection. They’re made with wide elastic straps for a comfortable, adjustable fit, and benefit from flexible foam-laminated spandex backs that improve dexterity. Leather-wrapped fingertips boost their durability, while a hi-viz backing increases worker visibility.

  • TenActiv™ STAGHVPU

    Product ID: STAGHVPU

    Cut-resistant gloves that offer high visibility and a tactile touch

    A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.

  • Dexterity® SKG/PXNE

    Product ID: SKG/PXNE

    Arc Flash rated gloves that stand up to heat and cold

    The combination of DuPont™ Kevlar® fiber and Protex® yarns provides these gloves with 360° ANSI Level A5 cut resistance and ANSI Level 4 heat resistance. Their lining ensures that hands stay warm in temperatures down to -5°C / 23°F, and a flame-resistant neoprene palm coating provides a strong, steady grip in wet or dry conditions. They’re capable of offering protection from heat in temperatures up to 260°C / 500°F and feature a level 3 Arc Flash rating.

  • Contender™ SBKG

    Product ID: SBKG

    Cut-resistant gloves with a high level of dexterity

    Made with DuPont™ Kevlar® fiber, these seamless knit gloves are ideal for use in metal stamping and commercial equipment manufacturing. They offer 360° ANSI Level A5 cut protection and ANSI Level 3 abrasion resistance while remaining highly comfortable and dexterous, thanks to their seamless string knit construction.

  • Clutch Gear® MXGKGHV

    Product ID: MXGKGHV

    Dexterous, high visibility mechanic gloves with 360° cut protection

    Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable.

  • Clutch Gear® MXGKGHTVB

    Product ID: MXGKGHTVB

    Dexterous, high-visibility mechanic gloves with winter protection down to -20°C / -4°F

    Thinsulate™ lining that warms hands in temperatures down to -20°C / -4°F optimizes these high-visibility goatskin gloves for work in icy winter conditions. They’re made from a tough, abrasion-resisting goatskin and feature extra back-of-hand protection to defend against knocks and bumps. Hook and loop closure tabs ensure a secure but comfortable fit and leather wrapping at the fingertips increases their lifespan.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Arc/Stick welding gloves with full forearm protection and 360° cut resistance

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their DuPont™ Kevlar® fiber lining delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with Kevlar® fiber for added seam integrity.

  • Endura® 378KGTVB

    Product ID: 378KGTVB

    Impact protection and 360° cut resistance that keeps hands warm down to -20°C / -4°F

    These tough goatskin gloves include reinforced back-of-hand protection to guard against impact while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. A padded palm increases durability while suppressing vibrations, and Thinsulate™ lining ensures warmth in temperatures down to -20°C / -4°F.

  • New

    Endura® 375GKGVB

    Product ID: 375GKGVB

    Impact-resistance with 360° cut protection and vibration dampening

    The DuPont™ Kevlar® fiber lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.