-
Endura® 378SB
Product ID: 378SBGeneral purpose gloves with cowgrain palms and split leather back to balance durability and flexibility
Our Endura® 378SB gloves feature cowgrain palms for durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The wing style thumb design, split leather back of hand, and elasticized wrists offer flexibility and a snug fit for all day comfort.
-
Endura® 370DTIGL
Product ID: 370DTIGLTIG welding gloves designed for a lady's hands for better fit and protection
Deer skin TIG welding gloves sized for ladies are designed with a cushioned patch on the pinky side to improve longevity and comfort while welding, and sewn with DuPont™ Kevlar® fiber to reduce the likelihood of getting burnt out when exposed to heat. The deer skin leather provides a high combination of durability, dexterity, and a fine sense of touch without forfeiting flexibility.
-
Snow Force™ SNOW388V
Product ID: SNOW388VInsulated gloves for extreme cold protection -30°C / -22°F
Our SnowForce™ SNOW388V insulated gloves are designed for extreme cold temperatures down to -30°C / -22°F. Ideal for tasks where cold is the primary hazard, these gloves feature three layers of insulation for warmth with minimum bulk in the harshest of climates. Waterproof and breathable inserts lock out water and wind, while Velcro® tabs and wrist elastics ensures a snug fit. Anti-slip PVC patches on the palm and fingertips provide grip in wet conditions.
-
TenActiv™ S21TXUFNLTC
Product ID: S21TXUFNLTCMaximum cut protection with reinforced thumb crotch for durability
Our TenActiv™ S21TXUFNLTC gloves provides the industry’s highest level of cut protection in a thin 21-gauge knit for a barehand feel. They feature a reinforced leather thumb crotch for added durability and wear making them ideal extreme cut hazard tasks that require added abrasion resistance. The ultra-thin foam nitrile palm coating is touchscreen compatible and provides a strong, steady grip when working in lightly oiled conditions.
-
TenActiv™ S21TXUGFN
Product ID: S21TXUGFNUltra-thin with maximum cut protection
Our hi-viz TenActiv™ S21TXUGFN gloves are silicone-free and deliver the industry’s highest level of cut protection in a thin 21-guage knit. With a barehand feel, they offer high durability without sacrificing flexibility which makes them ideal for asks with rish of extreme cut hazards that also requires a high level of dexterity. The ultra-thin foam nitrile palm coating provides a strong, steady grip in lightly oiled conditions, all while being touchscreen compatible.
-
Superior Touch® CS13PUCF
Product ID: CS13PUCFCleanroom-processed lint-free gloves that stop static
Our Superior Touch® CS13PUCF work gloves are designed to protect sensitive electronics. Cleanroom-processed and anti-static yarn makes the glove resistant to electric current to keep your load capacitors, chips, and processors safe. The polyurethane palm coating provides great grip and dexterity.
-
Superior Touch® S18ULPFN
Product ID: S18ULPFNUltra-Thin High-Tactility for Assembly and Inspection Work
Our Superior Touch® S18ULPFN gloves maximize touch and improve grip while protecting the hands from minor common hazards associated with assembly and inspection. The ultra-thin, lightweight shell and our thinnest palm coating offer a high level of dexterity to easily feel, grip, and manipulate small parts like nuts, bolts, clips, and plastic components.
-
Chemstop™ S15KGVNVIB
Product ID: S15KGVNVIBHigh-performing vibration dampening with well rounded mechanical protection and dexterity
Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.
-
Dexterity® S13PFNP
Product ID: S13PFNPHighly dexterous, puncture-resistant gloves with a strong grip
Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated, heat resistant gloves with 360° cut protection
Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.
-
Chemstop™ SH230
Product ID: SH230Chemical resistant gloves that don’t compromise on comfort
These chemically resistant gloves are made from a heavyweight PVC that resists a wide range of chemicals and stays soft even at lower temperatures. They feature ergonomic shaping for greater comfort and reduced hand fatigue, and they are CFIA-compliant, making them ideal for tasks like food processing and commercial fishing.
-
Emerald CX® SCXPNTFC
Product ID: SCXPNTFCTop level 360° cut protection and a strong grip meets liquid resistance
These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.
-
Dexterity® S18KGFN
Product ID: S18KGFNStrong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPUCut resistant, versatile gloves with a strong grip and barehand feel
A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NGuard against chemical exposure while protecting against cuts
When a job presents the risk of cuts and chemical exposure, these Chemstop™ gloves should be your first line of defense. They’re fully aramid lined for ANSI Level A5 cut protection and feature a red PVC base coating that guards against chemicals and solvents. Gauntlet cuffs provide additional protection to the forearms, and a black nitrile coating that resists oil ensures a steady grip even on slick surfaces. They’re ergonomically shaped for high levels of comfort and dexterity.
-
Superior Touch® S13WPPU
Product ID: S13WPPUHighly touch sensitive, non-linting gloves with a snug, comfortable fit
These gloves are made from a non-linting, highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A polyurethane coating improves grip, while ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance provides added protection. A snug fit ensures lasting comfort and dexterity, and their white coloring makes dust and dirt visible.
-
Superior Touch® S13PUCF
Product ID: S13PUCFTactile gloves with a strong grip that stop static in its tracks
These Superior Touch® gloves benefit from a carbon filament that grounds energy and prevents static charges from building, making them an ideal choice for working with electronics. Their continuous-filament nylon knit also provides outstanding touch sensitivity and durability, and a polyurethane palm coating provides a strong grip. They’re lint-free and non-marring, suiting them to work with glass and other delicate materials.
-
Dexterity® S13PNT
Product ID: S13PNTDurable, high-grip gloves that can stand up to oily conditions
A micropore nitrile coating that displaces oil on slick surfaces provides these 13-gauge nylon gloves with excellent grip, making them a great choice for handling small parts in oily conditions. The coating also resists oils and liquids to keep hands dry, and the gloves are fully launderable for easy cleaning and refresh.
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13HVLX
Product ID: S13HVLXHi-Viz versatile gloves with a strong wet/dry grip
Foam latex palms with a dual layer microfinish grip provide these versatile gloves with an outstanding grip on wet surfaces. They’re made from a lightweight and breathable polyester knit that wicks away moisture to keep hands dry and feature ergonomic shaping for enhanced comfort. ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance further protects hands, while high-viz lime green coloring improves visibility.
-
Superior Touch® S13GPU
Product ID: S13GPUTouch sensitive, non-marring gloves with a strong grip
These gloves are made from a non-linting, non-marring and highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A soft polyurethane coating improves grip, while offering ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. A snug fit ensures lasting comfort and dexterity.
-
Superior Touch® S13GPPU
Product ID: S13GPPUHighly touch sensitive, non-marring gloves
These gloves are made from a non-linting, non-marring and highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A polyurethane coating improves grip, while offering ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. A snug fit ensures lasting comfort and dexterity.
