Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Clutch Gear® MXGCE

    Product ID: MXGCE

    Durable, high-dexterity goatskin mechanic gloves

    Featuring flexible, foam-laminated spandex backs and abrasion-resisting goatskin leather palms with split patches, these mechanic gloves were designed from the ground-up for dexterity and durability. Reinforced thumb crotches increase their lifespan, and ergonomic shaping provides added comfort.

  • Clutch Gear® MXBE

    Product ID: MXBE

    Economic choice mechanic gloves with a high level of dexterity for light material handling

    Our Clutch Gear® MXBE are an economic choice mechanic gloves with reinforced thumb crotch for light material handling and fourchette inserts to increase comfort and hand motion. They also feature hook and loop wrist closures for a snug fit and stretch-nylon backs that guard against bumps and scrapes.

  • Superior® MLNF

    Product ID: MLNF

    Lightweight, fully washable, lint-free painter's gloves

    These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.

  • Superior® ML80

    Product ID: ML80

    Reversible inspector gloves designed for durability and dexterity

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They’re designed to be hand-to-hand reversible for greater ease of use and will form to the hand for a closer fit.

  • Superior® ML40

    Product ID: ML40

    Lightweight, reversible inspection gloves

    Made from a lightweight cotton blend, these inspection gloves provide ample dexterity while preventing the skin’s natural oils from coming into contact with the product. They’re designed to be worn on either hand for easier on/off and can also be worn as a liner under disposable latex or rubber gloves to improve comfort and absorb sweat.

  • Endura® 385CS

    Product ID: 385CS

    Hi-Viz gloves that can stop a chain saw dead in its tracks

    These gloves can stop a chain saw running at 3140 feet per minute. How?  Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.

  • Superior® LL80

    Product ID: LL80

    Women's fit cotton/poly inspector gloves for contamination prevention

    These breathable medium weight inspectors gloves are designed to protect against fingerprints, hand oils, scratches, and other types of contamination. The cotton/poly jersey knit fabric is very form-fitting, and the slip-on style allows for easy donning. Hand-to-hand reversible, which helps to extend the life of the glove, they can also be worn as a liner beneath other gloves to soak up perspiration; especially effective when worn underneath rubber gloves. These gloves are also fully washable and can be No Bleached.

  • Ground Hog™ 14012GH

    Product ID: 14012GH

    Eliminate paint spray-back with this cleanroom compatible glove

    Grounding yourself to a spray gun can be comfortable and functional when your hands are inside these solvent-resistant, cleanroom-compatible gloves. The secret? A highly conductive silver strip that runs along the inside surface of the palm to deliver the best possible grip. In addition, a double-faced hemmed cuff and lint-free materials keep particulate counts to the lowest possible level.

  • Endura® 66Q

    Product ID: 66Q

    Highly durable, split-leather fitter gloves

    These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Arc/Stick welding gloves with full forearm protection and 360° cut resistance

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.

  • Endura® 505BU

    Product ID: 505BU

    Durable, extended gauntlet Stick/Arc welding gloves with superior heat protection

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • Endura® 399GKGL5

    Product ID: 399GKGL5

    All-round fabrication and MIG welding glove with arc flash protection

    Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.

  • Endura® 378GOBBFC

    Product ID: 378GOBBFC

    Highest-level protection against finger crush hazards

    These tough goatskin driver gloves feature crush-proof finger caps designed to protect from impact hazards, cuts, and punctures. An Oilbloc™ treatment that resists oil and water ensures maximum grip, and a padded palm dampens vibrations. Extra protection at the back-of-the hand guards against further impacts.

  • Endura® 378GKVSB

    Product ID: 378GKVSB

    Durable leather gloves that protect hands from knocks and bumps for material handling and maintenance

    Our Endura® 378GKVSB driver gloves are made with durable leather that protects hands against knocks and bumps for material handling and maintenance tasks. Treated to resist water and liquids, they feature back-of-hand ANSI 2 impact protection against knocks and bumps, plus padded palms for comfort when material handling. The keystone thumb design improves durability against wear and tear for a longer wear life.

  • Endura® 378GKGVBG

    Product ID: 378GKGVBG

    Vibration-dampening gauntlet driver gloves that protect against cuts and bumps

    These tough goatskin driver gloves feature a TenActiv™️ lining that offers 360° ANSI Level A6 cut protection and Level 4 puncture protection. Reinforced materials at the back of the hand ensure a strong grip without inhibiting freedom of movement. Padding at the palm dulls vibrations to further enhance grip, while an extended gauntlet cuff keeps wrists safe.

  • Endura® 375KGVB

    Product ID: 375KGVB

    Goatskin driver gloves that safeguard against cuts and slips

    The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture protection. An Oilbloc™ treatment assures the highest level of oil and water resistance, and reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.

  • Endura® 375GKGVB

    Product ID: 375GKGVB

    Impact-resistance with 360° cut protection and vibration dampening

    The ParaActiv™ engineered yarn lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.

  • Endura® 375CSI

    Product ID: 375CSI

    Strength and functionality with built in oil and water resistance

    These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.

  • Endura® 370GFKL

    Product ID: 370GFKL

    MIG welding gloves with fine touch sensitivity

    Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.

  • Endura® 370CTIG

    Product ID: 370CTIG

    TIG welding gloves with heat protection that balances flexibility and durability

    Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.

  • Endura® 365HBR

    Product ID: 365HBR

    Highly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F

    Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.

  • Endura® 365DLX6

    Product ID: 365DLX6

    Lineman gloves with extended hi-viz cuffs

    Our Endura® 365DLX6 lineman gloves feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear and are treated to repel water, oil, and stains.

  • Endura® 365DLX2

    Product ID: 365DLX2

    Lineman gloves with short 2-inch hi-viz cuffs

    Our Endura® 365DLX2 lineman gloves feature a shorter 2-inch cuff that won’t get in the way when working in tight spaces or wearing clothing with bulky sleeves. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These gloves are treated to repel water, oil, and stains and feature hi-viz bands on the shorter cuffs for visibility.

  • Endura® 335DTIG

    Product ID: 335DTig

    Enhanced dexterity and sense of touch for precise TIG welding

    The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.