Show Filters

ORDER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Superior® GSSTAP

    Product ID: GSSTAP

    Comfortable cut-resistant sweater for high-risk tasks

    Our Superior® GSSTAP sweater provides cut resistance for the entire torso while remaining comfortable to wear. The collar and lower sleeves feature additional cut protection for neck and arms, safeguarding workers’ vulnerable areas from high-risk accidental injuries. Chest, abdomen, and upper arm areas protect against moderate cuts while the polyester back provides light cut protection, breathability, and helps reduce overall weight.

  • TenActiv™ STAGLXPB

    Product ID: STAGLXPB

    Maximum cut and puncture protection

    Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.

  • Chemstop™ S15KGVNVIB

    Product ID: S15KGVNVIB

    High-performing vibration dampening with well rounded mechanical protection and dexterity

    Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.

  • Contender™ KBKB1T

    Product ID: KBKB1T

    Flame-retardant, cut-resistant sleeves optimized for welding work

    Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.

  • Contender™ KFGCM

    Product ID: KFGCM

    Cut protecting sleeves that keep arms cool in warm working conditions

    These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.

  • Contender™ KG/CE22TH

    Product ID: KG/CE22TH

    Double-layered incidental cut and heat arm protection for material handling

    Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.

  • Contender™ KFG

    Product ID: KFG

    Cut resistant sleeves with a snug, reliable fit

    Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.

    Available in a tubular or tapered fit, with or without thumbholes, in a variety of sizes that range from 10″ to 22″

  • Contender™ KAW1C10

    Product ID: KAW1C10

    Heat-resistant sleeves that guard against cuts

    Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

  • Contender™ KAWC

    Product ID: KAWC

    Cut-resistant sleeves that guard against sparks, flames, and heat

    Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

    Available in a variety of sizes ranging from 6″ – 22″, with or without thumbholes

  • SUPERA™ FR WCKVFR

    Product ID: WCKVFR

    Fire-resistant watch cap that is ultra soft and non-irritating for all-day comfort

    This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².

  • SUPERA™ FR NWKVFR

    Product ID: NWKVFR

    Fire-resistant neck gaiter that is ultra soft and non-irritating for all-day comfort

    This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².

  • SUPERA™ FR BAKVFR

    Product ID: BAKVFR

    Non-irritating fire-resistant balaclava for reliable protection against fire hazards

    Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.

  • Cool Grip® SPGC/A

    Product ID: SPGC/A

    Insulated, heat resistant gloves with 360° cut protection

    Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.

  • Dexterity® S18KGFN

    Product ID: S18KGFN

    Strong grip, cut-resistant, touchscreen compatible gloves

    ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.

  • Chemstop™ S15KGV30N

    Product ID: S15KGV30N

    Chemical gloves with cut protection and nitrile coating for better wet grip

    Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.

  • Dexterity® S13KGPN

    Product ID: S13KGPN

    A superior grip combined with 360° cut protection

    A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.  These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.

  • Dexterity® S13KFGPU

    Product ID: S13KFGPU

    Cut resistant gloves with a bare-hand feel and strong, steady grip

    A flexible, fine gauge knit that offers ANSI Level A4 cut protection makes these non-marring gloves ideal for handling glass. They also feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Polyurethane-coated palms combine a strong, steady grip with a bare-hand feel. The gloves are ergonomically shaped for a close and comfortable fit.

  • Dexterity® S13KFGFNT

    Product ID: S13KFGFNT

    360° cut protection matched with a strong, steady grip

    These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces.  A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.

  • Dexterity® S13FRNE

    Product ID: S13FRNE

    Arc Flash tested gloves that guard against flames and cuts

    An engineered yarn that blends ParaActiv™ with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions.  Treated with an active agent to achieve a 99.9% antimicrobial status.

  • Contender™ TRFGK

    Product ID: TRFGK

    Heat and cut protection for fabrication and handling hot unfinished metal

    Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.

  • Contender™ SPGRK4

    Product ID: SPGRK4

    Dexterous, durable 360° cut protection

    These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.

  • Cool Grip® SPGRK/A

    Product ID: SPGRK/A

    Protection for handling moderately hot rubber and plastic

    Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.

  • Contender™ SPGC2D

    Product ID: SPGC2D

    360° cut protection combined with a strong, steady grip

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.

  • Contender™ SPGC

    Product ID: SPGC

    360° cut protection matched with comfort and dexterity

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.

No products in your box.