Product ID: SNAPVC
Dark grey cut-resistant gloves that hides grime and remains flexible when protecting hands in cold down to -5°C / 23°F
Our cold-rated Dexterity® SNAPVC gloves protect against cuts with a dark coloring to hide dirt and stains for a longer wear lifecycle. They provide 360° cut protection with ANSI A3 cut protection plus a fleece lining to keep hands warm down to -5°C / 23°F. The PVC palm coating provides strong grip and protects against stiffness in cold weather for improved range of motion in frigid wet conditions.
Product ID: L868FXVB
Coated gloves for dry chemical protection and secure grip
Our Chemstop™ L868FXVB gloves protect hands from both wet and dry chemicals, fine dust particles, and are non-reactive against concrete and common materials found in oil and gas. The tough, protective latex coating is crinkled to offer secure grip while back-of-hand bumpers protect against knocks and bumps. The gloves also feature 360° cut protection with high cut resistance and are highly tactile to perform precision work.
Product ID: S13CPWH
Winter string knit gloves with moisture wicking
Our Sure Knit™ S13CPWH gloves can be worn alone, or as a glove liner, for any work that requires extra insulation. The Thermolite® shell provides breathability and comfort while wicking away sweat from skin for added warmth and comfort. The gloves are fully launderable, allowing for fast and easy refresh, with excellent shape retention and shrink resistance.
Product ID: S13MW
General purpose black merino wool liner gloves
Our Sure Knit™ S13MW gloves are constructed of black merino wool to hide dirt and provide warmth. Merino wool is extremely soft and comfortable, and provides natural insulation with antimicrobial properties. These glove liners can be paired with other gloves for added warmth when working outdoors.
Product ID: GSSTAP
Comfortable cut-resistant sweater for high-risk tasks
Our Superior® GSSTAP sweater provides cut resistance for the entire torso while remaining comfortable to wear. The collar and lower sleeves feature additional cut protection for neck and arms, safeguarding workers’ vulnerable areas from high-risk accidental injuries. Chest, abdomen, and upper arm areas protect against moderate cuts while the polyester back provides light cut protection, breathability, and helps reduce overall weight.
Product ID: S18ND
Economical choice for low-hazard general purpose use that requires grip
Our Dexterity® S18ND work gloves are an economical but durable choice for general labor. The palms are dotted to provide a more breathable and dexterous grip than a full palm coat, making them comfortable enough for all-day use.
Product ID: S15GPUTS
Touchscreen gloves that won’t interfere with scanners
Our SuperiorTouch® S15GPUTS gloves are ideal for warehouse and item-picking workers. The new PU palm formula improves touchscreen capacity, and the gray shell won’t interfere with scanners to help improve accuracy. Perfect for workers who require the dexterity to handle large volumes of order-picking through boxes and items.
Product ID: CSTN120HF
Cleanroom-processed fingerless inspector gloves
Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.
Product ID: CS13PUCF
Cleanroom-processed lint-free gloves that stop static
Our Superior Touch® CS13PUCF work gloves are designed to protect sensitive electronics. Cleanroom-processed and anti-static yarn makes the glove resistant to electric current to keep your load capacitors, chips, and processors safe. The polyurethane palm coating provides great grip and dexterity.
Product ID: S13NSI
Non-Marring Gloves that Resist Adhesives, Liquid, and Heat
Our Dexterity® S13NSI gloves are a durable, high tactility option for resisting the stickiest of adhesives, repelling liquids, and protecting hands from heat due to the silicone palm coating. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating.
Product ID: S18ULPFN
Ultra-Thin High-Tactility for Assembly and Inspection Work
Our Superior Touch® S18ULPFN gloves maximize touch and improve grip while protecting the hands from minor common hazards associated with assembly and inspection. The ultra-thin, lightweight shell and our thinnest palm coating offer a high level of dexterity to easily feel, grip, and manipulate small parts like nuts, bolts, clips, and plastic components.
Product ID: S15GPNVB
Comfortable, cut resistant gloves with back of hand protection
These gloves match ANSI Level A5 cut protection with impact-resistant back of hand protection that delivers ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.
Product ID: STAGLXPB
Maximum cut and puncture protection
Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.
Product ID: S15NAPN
Maximum durability for high abrasion tasks
The S15NAPN gloves have a new nitrile palm formulation that helps to achieve maximum ANSI abrasion resistance. These gloves offer dexterity and comfort, and are excellent for masonry, material handling, and other tasks that involve a high level of abrasive hazards which wear down other gloves too quickly.
Product ID: S15KGVNVIB
High-performing vibration dampening with well rounded mechanical protection and dexterity
Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.
Product ID: S13PFNP
Highly dexterous, puncture-resistant gloves with a strong grip
Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
Product ID: KPXWE
Tubular knit sleeves that resist cuts, flames, sparks, and heat
Optimized for jobs with a high risk of exposure to sparks or flames, these tubular sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their STAYz-UP™ elastic armbands with polymer dots prevent slippage, while ANSI Level A2 cut protection defends arms from minor scrapes and cuts.
Product ID: KFGCM
Cut protecting sleeves that keep arms cool in warm working conditions
These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.
Product ID: KPXT
Fire- and cut-resistant sleeves that stay in place
Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.
Product ID: KPG1T22TH
Single layer cut-resistant sleeves with elasticized biceps for better motion and comfort
Our Contender™ KPG1T22TH single-layer sleeves offer excellent flexibility, motion, and breathability while providing 360° cut protection with high ANSI A5 cut protection. Their elasticized biceps with grip, thumbhole design, and tapered shape ensures a better fit that stays in place.
Also available in 18″ (KPG1T18TH)
Product ID: KP1T
Stay-in-place sleeves that combine comfort with cut protection
Made from recycled material, these sleeves are constructed from a single-layer filament yarn that provides ANSI Level A2 cut protection. Their tapered construction and STAYz-UP™ elasticized biceps provide added comfort and ensure they stay in place during long work hours. These sleeves are available in silicone-free and Lycra-free versions, as well as with or without thumbholes.
Product ID: KGC1T
Flame-resistant sleeves that defend against cuts, punctures and abrasion
A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 1 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.
Product ID: KG/CE22TH
Double-layered incidental cut and heat arm protection for material handling
Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.
Product ID: KFG
Cut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.