Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Endura® 378GOT

    Product ID: 378GOT

    Durable goatskin driver gloves with hi viz fingertips

    These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.

  • Endura® 378GOBTL

    Product ID: 378GOBTL

    Oil and water resistant gloves that keep hands warm down to -15°C / 5°F

    Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.

  • Endura® 378GOBTKL

    Product ID: 378GOBTKL

    Cold-rated arc flash protection with cut resistance and liquid resistance

    Our Endura® 378GOBTKL goatskin gloves keep hands warm down to -25°C / -13°F and are ideal for non-energized work where arc flash is present and resistance to liquids is a must. Made with material designed to resist flame, they are arc flash rated level 4 with an ATPV of 49 cal / cm², offer ANSI 2 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A4 cut resistance. These gloves are liquid resistant and the palms are unpadded for steady grip and a better sense of feel when performing tasks.

  • Endura® 378GOBKL

    Product ID: 378GOBKL

    Arc flash-rated for non-energized work with cut protection and liquid resistance

    Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 40 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.

  • Endura® 378GKTTL

    Product ID: 378GKTTL

    Comfortable, abrasion resistant gloves that keep hands warm down to -15°C / 5°F

    A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.

  • Endura® 378GKGTL

    Product ID: 378GKGTL

    Cut-resistant gloves with cold protection that keep hands warm down to -15°C / 5°F

    Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -15°C / 5°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.

  • Endura® 378GKTKL

    Product ID: 378GKTKL

    Close-fitting goatskin gloves that guard against cuts and punctures

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a ParaActiv™ engineered yarn lining provides 360° ANSI Level A3 cut protection and ANSI Level 4 puncture resistance.

  • Endura® 378GKTFG

    Product ID: 378GKTFG

    Durable arc flash-rated gloves with high cut protection for longer wear life

    Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.

  • Endura® 378GKTA

    Product ID: 378GKTA

    Durable goatskin gloves for low hazard protection and material handling

    Our Endura® 378GKTA gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.

  • Endura® 378GKGVBE

    Product ID: 378GKGVBE

    Economic choice for shutdown and turnaround maintenance

    Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.

  • Endura® 378GKGTVBE

    Product ID: 378GKGTVBE

    Vibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F

    These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.

  • Endura® 378GKGE

    Product ID: 378GKGE

    Economic choice for flash fire protection with cut resistance

    Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.

  • Endura® 378CXGOB

    Product ID: 378CXGOB

    Oil resistant gloves with the highest level of 360° cut protection on the market

    These ultra-abrasion-resistant goatskin gloves are your first line of defense against punctures and cuts. Lining made from a blend of para-aramid and wire-core provides 360° ANSI Level A9 cut protection. They also provide ANSI Level 5 protection from punctures. Its Oilbloc™ treatment resists oil and water to prevent slips when safety matters most.

  • Endura® 378AFL

    Product ID: 378AFL

    Close-fitting, hard-wearing winter driving gloves

    These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.

  • Endura® 378A

    Product ID: 378A

    Durable cowhide gloves for low hazard protection and material handling

    Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.

  • Endura® 365DLXDTL

    Product ID: 365DLXDTL

    Extended cuff lineman gloves with double-weighted lining that keep hands warm down to -15°C / 5°F

    Our Endura® 365DLXDTL gloves feature double-weighted lining for cold protection along with 6-inch cuffs with hi-viz bands for visibility and added protection. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.

  • Endura® 365DLX2KG

    Product ID: 365DLX2KG

    Built-tough lineman gloves with enhanced visibility

    These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.

  • Endura® 361DLXFTL

    Product ID: 361DLXFTL

    Cold-rated lineman mitts that keep hands warm down to -20°C / -4°F

    Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to -20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, liquids, and stains and feature extended cuffs with hi-viz bands.

  • Endura® 304BOA

    Product ID: 304BOA

    Durable mitts built for extreme cold weather protection down to -35°C / -31°F

    The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.

  • Endura® 76B

    Product ID: 76B

    Scrape and abrasion-resistant driver gloves that lightly resist water and oil

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.

  • Endura® 69BSKFFL

    Product ID: 69BSKFFL

    Heavy-duty work gloves that fuse a durable construction with 360° cut protection

    These tough split-leather gloves are lined with TenActiv™ to offer ANSI A5 cut resistance with 360° cut protection. Sewing thread is made with ParaActiv™ yarn for added seam integrity while a gunn-cut pattern prevents the seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.

  • Endura® 66BRBOA

    Product ID: 66BRBOA

    Durable split-fitter gloves with extra wrist protection and a warm, winter-proof lining

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.

  • Endura® 66B

    Product ID: 66B

    Built-tough, split-leather fitter gloves for rugged wear

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.

  • Endura® 378GKGVB

    Product ID: 378GKGVB

    Multi-hazard protection with liquid and water resistance for heavy machine operation and maintenance

    Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.