-
Superior Touch® S18ULPFN
Product ID: S18ULPFNOur Superior Touch® S18ULPFN gloves maximize touch and improve grip while protecting the hands from minor common hazards associated with assembly and inspection. The ultra-thin, lightweight shell and our thinnest palm coating offer a high level of dexterity to easily feel, grip, and manipulate small parts like nuts, bolts, clips, and plastic components.
-
TenActiv™ STAGLXPB
Product ID: STAGLXPBOur STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.
-
TenActiv™ STAGCTPU
Product ID: STAGCTPUWhen working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.
-
Dexterity® S15NAPN
Product ID: S15NAPNThe S15NAPN gloves have a new nitrile palm formulation that helps to achieve maximum ANSI abrasion resistance. These gloves offer dexterity and comfort, and are excellent for masonry, material handling, and other tasks that involve a high level of abrasive hazards which wear down other gloves too quickly.
-
Dexterity® S13PFNP
Product ID: S13PFNPMade from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
-
TenActiv™ STAGFNP
Product ID: STAGFNPA 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 4 palm puncture resistance.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNThis waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ 18-gauge knit assures ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.
-
TenActiv™ S18TAXFN
Product ID: S18TAXFNThese touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.
-
TenActiv™ S18TATLFN
Product ID: S18TATLFNThese multi-use gloves feature an acrylic terry liner that keeps hands warm in temperatures down to -5°C / 23°F. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance without sacrificing dexterity. A foam nitrile coating at the palms guarantees a sturdy grip while working on oily surfaces.
-
Dexterity® S18KGDNE
Product ID: S18KGDNEOur Dexterity® S18KGDNE knit gloves are arc flash level 3 rated with a dexterous design for precision electrical maintenance work. Made with DuPont™ Kevlar® fiber that provides 360° cut protection, they feature additional cut-resistance on the cuff to protect arms and wrists against exposed metal edges. Touchscreen compatible with a neoprene palm coating for a sturdy grip and features anti-static properties to protect sensitive electronics.
-
Emerald CX® S10NXFNLT
Product ID: S10NXFNLTWe made Our Emerald CX® S10NXFNLT gloves with a composite filament fiber and stainless steel blend, providing abrasion and non-hypodermic puncture resistance in a latex free design. The nitrile palm provides the grip and dexterity you need, while the leather thumb crotch helps increase durability for extended wear.
-
Superior Touch® CS13PUCF
Product ID: CS13PUCFOur Superior Touch® CS13PUCF work gloves are designed to protect sensitive electronics. Cleanroom-processed and anti-static yarn makes the glove resistant to electric current to keep your load capacitors, chips, and processors safe. The polyurethane palm coating provides great grip and dexterity.
-
Superior Touch® CS13SXPUQ
Product ID: CS13SXPUQOur cleanroom-processed Superior Touch® CS13SXPUQ gloves are ideal for highly sensitive finishing environments where tasks require fine motor skills. Knit with lint-free Dyneema®, they protect against contaminant fibers and provide 360° light cut protection. These ergonomic breathable gloves ensure precision, making them ideal when working with electronics, glass, manufacturing, and pharmaceutical products.
-
Emerald CX® SCXLX
Product ID: SCXLXA latex palm coating provides these gloves with an excellent dry grip, while a blend of DuPont™ Kevlar® fiber, Wire-Core™ steel and polyester ensures ANSI Level A5 cut protection. For added safety, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
Dexterity® S10LXPB
Product ID: S10LXPBHypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.
-
Chemstop™ NL3030
Product ID: NL3030These 30 mil thick gloves are made from a combination of neoprene and rubber that grants extra chemical resistance, making them ideal for handling acids, formaldehyde, peroxides and more. The neoprene in their construction offers abrasion resistance while increasing durability, and flock-lining provides additional comfort. A 12″ length offers a higher level of forearm protection.
-
Dexterity® SKGPNVB
Product ID: SKGPNVBThese high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.
-
Dexterity® SKFGFNVB
Product ID: SKFGFNVBThese impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.
-
Superior Touch® S13SXGPU
Product ID: S13SXGPUThese CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.
-
TenActiv™ STAGHVPN
Product ID: STAGHVPNA stronger-than-steel TenActiv™ yarn gives these gloves ANSI Level A5 cut protection, and a hi-viz knit shell increases their visibility. A micropore nitrile coating ensures an excellent grip even on wet and oily surfaces, and a reinforced thumb crotch extends their lifespan by reducing wear in high-stress areas. They’re made touchscreen compatible so you never need to remove your gloves as you move between tasks.
-
TenActiv™ S18WTFN
Product ID: S18WTFNThese waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.
-
TenActiv™ S13TAXFN
Product ID: S13TAXFNIntended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
TenActiv™ STAGFNFC
Product ID: STAGFNFCThanks to crush-resistant finger caps, these gloves protect fingertips against pinch-point hazards as well as crush, impact, cut, and puncture hazards. In addition, their 13-gauge knit TenActiv™ shell provides 360° cut resistance with ANSI Level A4 cut protection. A foam nitrile palm coating has been added to offer a strong, steady grip on slippery surfaces, and a reinforced thumb crotch prolongs the glove’s lifespan.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNA hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.