Show Filters

ORDER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • TenActiv™ STAGHVPU

    Product ID: STAGHVPU

    Cut-resistant gloves that offer high visibility and a tactile touch

    A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.

  • Contender™ SBKG

    Product ID: SBKG

    Black knit cut-resistant gloves that hide dirt and stains for longer wear life

    Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.

  • Clutch Gear® MXGKGHV

    Product ID: MXGKGHV

    Hi-viz mechanic gloves with cut protection for material handling and visibility

    Our Clutch Gear® MXGKGHV gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance for material handling. These hi-viz gloves feature leather wrapped fingertips and palms plus a hook and loop wrist closure for a snug, comfortable fit.

  • Superior® MLNF

    Product ID: MLNF

    Lightweight, fully washable, lint-free painter's gloves

    These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.

  • Superior® ML80

    Product ID: ML80

    Reversible inspector gloves designed for durability and dexterity

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They’re designed to be hand-to-hand reversible for greater ease of use and will form to the hand for a closer fit.

  • Superior® ML40

    Product ID: ML40

    Lightweight, reversible inspection gloves

    Made from a lightweight cotton blend, these inspection gloves provide ample dexterity while preventing the skin’s natural oils from coming into contact with the product. They’re designed to be worn on either hand for easier on/off and can also be worn as a liner under disposable latex or rubber gloves to improve comfort and absorb sweat.

  • Superior® LL80

    Product ID: LL80

    Women's fit cotton/poly inspector gloves for contamination prevention

    These breathable medium weight inspectors gloves are designed to protect against fingerprints, hand oils, scratches, and other types of contamination. The cotton/poly jersey knit fabric is very form-fitting, and the slip-on style allows for easy donning. Hand-to-hand reversible, which helps to extend the life of the glove, they can also be worn as a liner beneath other gloves to soak up perspiration; especially effective when worn underneath rubber gloves. These gloves are also fully washable and can be No Bleached.

  • Ground Hog™ 14012GH

    Product ID: 14012GH

    Eliminate paint spray-back with this cleanroom compatible glove

    Grounding yourself to a spray gun can be comfortable and functional when your hands are inside these solvent-resistant, cleanroom-compatible gloves. The secret? A highly conductive silver strip that runs along the inside surface of the palm to deliver the best possible grip. In addition, a double-faced hemmed cuff and lint-free materials keep particulate counts to the lowest possible level.

  • Endura® 66Q

    Product ID: 66Q

    Highly durable, split-leather fitter gloves

    These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Arc/Stick welding gloves with full forearm protection and 360° cut resistance

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.

  • Endura® 505BU

    Product ID: 505BU

    Durable, extended gauntlet Stick/Arc welding gloves with superior heat protection

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • Endura® 399GKGL5

    Product ID: 399GKGL5

    All-round fabrication and MIG welding glove with arc flash protection

    Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.

  • Endura® 375CSI

    Product ID: 375CSI

    Strength and functionality with built in oil and water resistance

    These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.

  • Endura® 370GFKL

    Product ID: 370GFKL

    MIG welding gloves with fine touch sensitivity

    Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.

  • Endura® 370CTIG

    Product ID: 370CTIG

    TIG welding gloves with heat protection that balances flexibility and durability

    Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.

  • Endura® 365HBR

    Product ID: 365HBR

    Highly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F

    Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.

  • Endura® 335DTIG

    Product ID: 335DTig

    Enhanced dexterity and sense of touch for precise TIG welding

    The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.

  • Endura® 335CBP

    Product ID: 335CBP

    TIG welding gloves that can take the heat

    These reverse cowhide TIG welding gloves feature reinforced back patches to maximize protection from sparks. Sewing thread is made with Kevlar® fiber for added seam integrity. Rated for heat resistance up to 260°C / 500°F, complete with strapped thumbs and an extended cowhide gauntlet, safety is at the heart of their design. Gunn-styling assures that these gloves are as comfortable as they are tough.

  • Endura® 76YBDQ

    Product ID: 76YBDQ

    Sweat absorbing, everyday gloves with added forearm protection

    These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.

  • Endura® 76GR

    Product ID: 76GR

    Scrape and abrasion-resistant driver gloves with added forearm protection

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.

  • Endura® 76BFTL

    Product ID: 76BFTL

    Scrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.

  • Superior® N10F

    Product ID: N10F

    Keep it clean with lint-free nylon inspector glove

    Meeting the needs of assembly line, cleanrooms, food handling and other industries, these lint-free, form-fitting gloves are designed for clean applications.

  • Emerald CX® SKWCPLP

    Product ID: SKWCPLP

    360° cut resistance and a strong, steady grip

    A strong grip meets high cut resistance in the form of these string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester that provides 360° ANSI Level A6 cut protection. Their leather palms increase comfort and durability, while providing a strong, steady grip on lightly oiled metal which makes these gloves ideal for handling heavy metal parts as well as glass or sharp objects.

  • Cool Grip® SKPX/PSS

    Product ID: SKPX/PSS

    360° cut protection matched with superior flame and spark resistance

    Made from a blend of DuPont™ Kevlar® fiber and Protex® yarns that provide 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance, these 7-gauge double-layer gloves are a perfect match for any job that presents cut hazards in high heat. Silicone strips at the palm increase their grip and heat resistance, and inner gloves made from high-bulk polyester give them a soft, comfortable fit.

No products in your box.