Show Filters

ORDER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Endura® 398OBPB

    Product ID: 398OBPBLH

    Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 4 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A4 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.

  • Contender™ KPXWE

    Product ID: KPXWE

    Optimized for jobs with a high risk of exposure to sparks or flames, these tubular sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their STAYz-UP™ elastic armbands with polymer dots prevent slippage, while ANSI Level A2 cut protection defends arms from minor scrapes and cuts.

  • Endura® 505BUWS

    Product ID: 505BUWS

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • Endura® SPL4

    Product ID: SPL4

    Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.

  • Contender™ KPG1T22TH

    Product ID: KPG1T22TH

    A tapered fit combined with functional thumbholes and STAYz-UP™ elasticized biceps ensure these cut-resistant sleeves stay in place until the job is done. Constructed from a single layer of high-tenacity/composite filament fiber, these sleeves provide ANSI Level A5 cut protection to keep your arms safe from cut hazards. They’re fully washable for easy refresh and long-lasting product wear.

  • Contender™ KGC1T

    Product ID: KGC1T

    A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 2 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.

  • Contender™ KFG

    Product ID: KFG

    Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their DuPont™ Kevlar® fiber lining delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with Kevlar® fiber for added seam integrity.

  • Endura® 505BU

    Product ID: 505BU

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • Endura® 375CSI

    Product ID: 375CSI

    These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.

  • Endura® 370GFKL

    Product ID: 370GFKL

    These MIG welder gloves are built with tough goatskin leather on the outside and a fine-gauge DuPont™ Kevlar® interlock knit lining inside to allow for 360° cut protection and durability that minimizes interference with touch sensitivity. Their lining made with DuPont™ Kevlar® fiber offers heat and spark resistance in addition to cut protection. And their wide gauntlet cuffs are gusseted, making it easier to put them on and take them off.

  • Endura® 370CTIG

    Product ID: 370CTig

    The wide fit of this Canadian-style gauntlet cuff and the supple pliability of goatskin provide these TIG welding gloves with the highest possible level of mobility for precise jobs. At the same time, the incredible toughness of goatskin ensures that these flexible gloves are built to last.

  • Endura® 365HBR

    Product ID: 365HBR

    Built extra-tough from horsehide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.

  • Endura® 335DTIG

    Product ID: 335DTig

    The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.

  • Endura® 335CBP

    Product ID: 335CBP

    These reverse cowhide TIG welding gloves feature reinforced back patches to maximize protection from sparks. Sewing thread is made with Kevlar® fiber for added seam integrity. Rated for heat resistance up to 260°C / 500°F, complete with strapped thumbs and an extended cowhide gauntlet, safety is at the heart of their design. Gunn-styling assures that these gloves are as comfortable as they are tough.

  • Endura® 398KGLBG

    Product ID: 398KGLBG

    These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 4 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 3 puncture resistance.

  • Endura® 398GLBG

    Product ID: 398GLBG

    These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity and feature 6″ long gauntlet cuffs for extra protection Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.

  • Endura® 398GLBB

    Product ID: 398GLBB

    These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity. Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.

No products in your box.