High cut resistance combined with heat protection up to 260°C / 500°F
Designed for handling moderately hot parts during rubber and plastic manufacturing, these gloves are made from a unique blend of yarns that provides 360° ANSI Level A6 cut protection and ANSI Level 4 heat resistance. A glove-within-a-glove design traps air in to increase insulation. Its knit construction provides a high level of comfort and dexterity.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
A cut-and-sewn construction provides these winter driving gloves with a high degree of comfort and dexterity. The resilience of goatskin and durability of a keystone thumb design ensures product longevity while a composite filament fiber liner guarantees 360° ANSI Level A6 cut protection and ANSI Level 4 puncture resistance. Their warming but lightweight Thinsulate™ lining keeps fingers warm in temperatures down to -30°C / -22°F.
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity and feature 6″ long gauntlet cuffs for extra protection Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.
200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to provide warmth in temperatures down to -15°C / 5°F without sacrificing mobility. A Waterstop™ treatment repels water, oil and stains. 3M™ Scotchlite™ retroreflective silver strips located on the 2″ cuffs provide enhanced visibility, sewing thread is made with Kevlar® fiber for added seam integrity, and reinforced palms provide a high level of durability.
These winter mitts are built with a heavyweight horsehide leather that’s reinforced at the palm and thumb to increase durability, especially in critical high-wear areas. Their Thinsulate™ lining keeps hands warm in temperatures down to -20°C / -4°F, and a Waterstop™ treatment repels water and oil. A one-finger design increases dexterity, and silver strips with hi-viz overlay at the cuffs provide enhanced visibility. These heavy duty winter mitts are also designed to offer excellent puncture protection.
These winterized, close-fitting driver gloves have hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability. 100g of Thinsulate™ lining keeps hands warm and safe in temperatures down to down to -30°C / -22°F.
These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.
Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.
These tough goatskin gloves provide reinforced back-of-hand protection and a composite blended lining that offers 360° ANSI Level A6 cut protection. They defend the hand from impact injuries, while a padded palm increases durability and suppresses vibrations.
These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.
