Reinforced thumb crotch for durability when handling abrasive materials
We made Our Emerald CX® S10NXFNLT gloves with a composite filament fiber and stainless steel blend, providing abrasion and non-hypodermic puncture resistance in a latex free design. The nitrile palm provides the grip and dexterity you need, while the leather thumb crotch helps increase durability for extended wear.
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 41 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
These winter mitts are built with a heavyweight horsehide leather that’s reinforced at the palm and thumb to increase durability, especially in critical high-wear areas. Their Thinsulate™ lining keeps hands warm in temperatures down to -20°C / -4°F, and a Waterstop™ treatment repels water and oil. A one-finger design increases dexterity, and silver strips with hi-viz overlay at the cuffs provide enhanced visibility. These heavy duty winter mitts are also designed to offer excellent puncture protection.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion-resistant goatskin and the durability of a keystone thumb design extends product longevity. As time goes by, these gloves will mold to your hand for a close and comfortable fit.
Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity and feature 6″ long gauntlet cuffs for extra protection Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.
200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -20°C / -4°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.
These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A5 cut protection while defending against impact injuries. They’ve received an Oilbloc™ treatment which prevents oils and liquids from soaking into the leather, and a padded palm increases durability while suppressing vibrations. A level 3 Arch Flash testing rating ensures protection from sparks and flame.
These gloves match ANSI Level A5 cut protection with impact-resistant back of hand protection that delivers ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.
