Hi-Viz gloves with superior cut protection and impact resistance
Featuring both a TenActiv™-blended yarn for ANSI Level A7 cut protection and impact-resistant back-of-hand protection, these composite-knit gloves are built to perform in any environment that presents cut and impact hazards. A micropore nitrile coating at the palm assures a steady grip even in wet or oily conditions, and patches of hi-viz color increase visibility.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity. Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.
These driver gloves are made from tough cowgrain leather that resists abrasions and repels water and will form to the hands over time for a closer, comfortable fit. Keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible.
These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 4 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 3 puncture resistance.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A3 cut protection and ANSI Level 4 puncture resistance.
Our multi-use Endura® 378GOBKL gloves provide 360° cut protection with ANSI Level A4 cut resistance and have achieved a Level 4 arc flash rating with an ATPV of 41 cal/cm². They feature an easy slip-on fit that provides comfort and are treated to resist oil and water.
Our multi-use Endura® 378GOBTKL gloves provide a Level 4 arc flash rating with an ATPV of 52 cal/cm². They feature 360° cut protection with ANSI Level A4 cut resistance while the Thinsulate™ lining keeps hands warm down to -15°C / 5°F.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection and ANSI Level 3 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
