Durable, cut resistant gloves with a strong grip and bare hand feel
These gloves are knit from a non-linting continuous filament yarn that’s stronger than steel and provides ANSI Level A4 cut protection. Their palms are coated with polyurethane that increases grip and adds a bare-hand feel. Thanks to a black coloration that hides dirt, you won’t have to wash them between every job.
200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -20°C / -4°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.
These goatskin gloves benefit from a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level 4 cut protection and ANSI Level 4 puncture protection. Their Oilbloc™ treatment delivers outstanding water and oil resistance, and a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F. An Arc Thermal Performance Value (ATPV) of 52 cal/cm² defends from stray sparks and flames.
These ultra-abrasion-resistant goatskin gloves are your first line of defense against punctures and cuts. Lining made from a blend of para-aramid and wire-core provides 360° ANSI Level A9 cut protection. They also provide ANSI Level 5 protection from punctures. Its Oilbloc™ treatment resists oil and water to prevent slips when safety matters most.
These cowgrain leather mitts meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands. They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F . Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity. Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion-resistant goatskin and the durability of a keystone thumb design extends product longevity. As time goes by, these gloves will mold to your hand for a close and comfortable fit.
These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.
These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.
A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.
