-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends ParaActiv™ with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
Emerald CX® S13CXPNT
Product ID: S13CXPNTSilicone-free gloves with steady wet grip that protect against cut and heat hazards
Our Emerald CX® S13CXPNT silicone-free gloves offer cut and heat protection plus a steady wet grip. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 2 heat protection. Micropore nitrile palm coating offers a steady wet grip and prevents water from seeping in. Reinforced thumb crotch improves durability and protects against wear and tear.
-
Chemstop™ NE240TKL
Product ID: NE240TKLHeat resistant gloves that safeguard against chemicals
These heavy-duty neoprene gloves protect against a wide range of oils and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. Rated ANSI Level 3 resistant for protection up to 200°C / 392°F. Terry lining provides further protection from thermal contact and diamond-grip finish palms ensure a strong grip.
-
North Sea™ N230FLK
Product ID: N230FLKFleece-lined fishing gloves that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.
-
North Sea™ N230FL
Product ID: N230FLFishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.
-
North Sea™ N230CR
Product ID: N230CROil resistant gloves that maintain a steady grip in cold conditions
Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A5 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
Superior Touch® SSXPU3OF
Product ID: SSXPU3OFOpen-finger design offers optimal blend of dexterity and cut protection
An open-finger design makes these gloves ideal for tasks that require a bare-hand feel, while a Dyneema® knit provides ANSI Level A2 cut protection. A polyurethane coating at the palm enhances their tactile quality while improving grip. The combination of a snug fit and stretchy material delivers a high level of comfort and dexterity.
-
Emerald CX® SCXTAPVC
Product ID: SCXTAPVCHigh 360° cut protection gloves that keep hands warm and dry down to -5°C / 23°F
A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / 23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.
-
Endura® 378GAHVB
Product ID: 378GAHVBBuilt tough goatskin gloves for when visibility matters most
These built-tough goatskin gloves achieve ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Gunn-cut styling increases comfort and durability, while a pull-on fit makes it easy to get them on. Elasticized backs provide a secure fit, every time.
-
Endura® 378GOB
Product ID: 378GOBEasy-on goatskin gloves that resist oil and water
Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.
-
Clutch Gear® MXGBE
Product ID: MXGBEAll-purpose mechanic gloves with a strong grip, optimized for wet or cold conditions
These mechanic gloves are built from quick-drying synthetic leather that performs well in wet or cold conditions, and benefit from flexible, foam-laminated spandex backs that allow for a high degree of dexterity. Their ergonomic shaping guarantees all-day comfort, and wide elastic cuffs with adjustable backs allow for a close, custom fit. Select areas are reinforced by PVC Diamond Grip patches with Poron® padding for a higher degree of durability and better grip.
-
Endura® 385CS
Product ID: 385CSHi-Viz gloves that can stop a chain saw dead in its tracks
These gloves can stop a chain saw running at 3140 feet per minute. How? Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 378GOBBFC
Product ID: 378GOBBFCHighest-level protection against finger crush hazards
These tough goatskin driver gloves feature crush-proof finger caps designed to protect from impact hazards, cuts, and punctures. An Oilbloc™ treatment that resists oil and water ensures maximum grip, and a padded palm dampens vibrations. Extra protection at the back-of-the hand guards against further impacts.
-
Endura® 375KGVB
Product ID: 375KGVBGoatskin driver gloves that safeguard against cuts and slips
The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture protection. An Oilbloc™ treatment assures the highest level of oil and water resistance, and reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.
-
Endura® 375CSI
Product ID: 375CSIStrength and functionality with built in oil and water resistance
These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 370CTIG
Product ID: 370CTIGTIG welding gloves with heat protection that balances flexibility and durability
Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.
-
Endura® 378GOT
Product ID: 378GOTDurable goatskin driver gloves with hi viz fingertips
These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.
-
Endura® 378GOBTL
Product ID: 378GOBTLOil and water resistant gloves that keep hands warm down to -15°C / 5°F
Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.
-
Endura® 378GOBKL
Product ID: 378GOBKLArc flash-rated for non-energized work with cut protection and liquid resistance
Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 40 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A4 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Endura® 378GKTFG
Product ID: 378GKTFGDurable arc flash-rated gloves with high cut protection for longer wear life
Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.
-
Endura® 378GKTA
Product ID: 378GKTADurable goatskin gloves for low hazard protection and material handling
Our Endura® 378GKTA gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.