Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • TenActiv™ STAGFNP

    Product ID: STAGFNP

    A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 4 palm puncture resistance.

  • Dexterity® S15GPNVB

    Product ID: S15GPNVB

    These gloves match ANSI Level A5 cut protection with impact-resistant back of hand protection that delivers ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.

  • TenActiv™ S13TAXFN

    Product ID: S13TAXFN

    Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Emerald CX® SCXPNTFC

    Product ID: SCXPNTFC

    These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.

  • Dexterity® S13KGPN

    Product ID: S13KGPN

    A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.

  • Dexterity® S13KFGFNT

    Product ID: S13KFGFNT

    These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces.

  • Emerald CX® S13CXPNT

    Product ID: S13CXPNT

    Made from a 13-gauge blend of DuPont™ Kevlar® fiber and stainless-steel Wire-Core™, these gloves offer ANSI Level 4 abrasion resistance, 360° ANSI Level A6 cut protection, and ANSI Level A3 puncture resistance. A micropore nitrile palm coating keeps hands dry by resisting oils and liquids, while craters function like tiny suction cups to offer a strong, steady grip on wet or oily surfaces.

  • TenActiv™ STAGPN

    Product ID: STAGPN

    These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance.

  • TenActiv™ STAFGPU

    Product ID: STAFGPU

    These gloves feature a soft polyurethane palm coating that provides excellent grip and a high level of comfort. Their TenActiv™ yarn ensures ANSI Level A5 cut protection, and a 13-gauge knit delivers ANSI Level 4 abrasion resistance without sacrificing dexterity. Well-suited to a wide variety of tasks, from rubber and plastics manufacturing to general warehouse use.

  • TenActiv™ STAFGFNT

    Product ID: STAFGFNT

    A breathable TenActiv™ yarn provides these 13-gauge knit gloves with ANSI Level A4 cut protection, and a black foam nitrile palm coating offers a sponge-like grip in wet and oily conditions. They feature ANSI Level 4 abrasion resistance and a high level of dexterity, while their coloration helps to hide dirt between launderings. Excellent for handling oily machine parts.

  • TenActiv™ STACXPURT

    Product ID: STACXPURT

    These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.

  • TenActiv™ STACXPNRT

    Product ID: STACXPNRT

    These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 5 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.

  • TenActiv™ S18TAFG

    Product ID: S18TAFG

    These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel yet conforms to the hand for an unparalleled level of dexterity. Wear them alone for work that requires a highly tactile touch and 360° ANSI Level A4 cut protection or utilize them as liners worn under another pair of gloves for added cut resistance.

  • Dexterity® S13KF

    Product ID: S13KF

    These lightweight string knit gloves are made from a fine-gauge, composite filament fiber wrapped with para-aramid fibers for 360° ANSI Level A4 cut protection and ANSI Level 3 abrasion resistance. Cut resistance combined with a close, ergonomic shape means they can be easily worn as liners under other gloves for extra protection.