Endura® 378GKGVBEProduct ID: 378GKGVBE
Economic choice for shutdown and turnaround maintenance
Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.
Endura® 378GKGTVBEProduct ID: 378GKGTVBE
Vibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F
These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.
Endura® 378GKGEProduct ID: 378GKGE
Economic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
Endura® 378CXGOBProduct ID: 378CXGOB
Oil resistant gloves with the highest level of 360° cut protection on the market
These ultra-abrasion-resistant goatskin gloves are your first line of defense against punctures and cuts. Lining made from a blend of para-aramid and wire-core provides 360° ANSI Level A9 cut protection. They also provide ANSI Level 5 protection from punctures. Its Oilbloc™ treatment resists oil and water to prevent slips when safety matters most.
Endura® 378AFLProduct ID: 378AFL
Close-fitting, hard-wearing winter driving gloves
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
Endura® 378AProduct ID: 378A
Durable cowhide gloves for low hazard protection and material handling
Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
Endura® 365DLXDTLProduct ID: 365DLXDTL
Hi-Viz lineman gloves built for warmth down to -15°C / 5°F
200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -15°C / 5°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.
Endura® 365DLX2KGProduct ID: 365DLX2KG
Built-tough lineman gloves with enhanced visibility
These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.
Endura® 361DLXFTLProduct ID: 361DLXFTL
Cold-rated lineman mitts that keep hands warm down to -20°C / -4°F
Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to –20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, oil, and stains and feature extended cuffs with hi-viz bands.
Endura® 304BOAProduct ID: 304BOA
Durable mitts built for extreme cold weather protection down to -35°C / -31°F
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
Endura® 76BProduct ID: 76B
Scrape and abrasion-resistant driver gloves that lightly resist water and oil
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.
Endura® 69BSKFFLProduct ID: 69BSKFFL
Heavy-duty work gloves that fuse a durable construction with 360° cut protection
These tough split-leather gloves are lined with TenActiv™ to offer ANSI A5 cut resistance with 360° cut protection. Sewing thread is made with para-aramid for added seam integrity while a gunn-cut pattern prevents the seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.
Endura® 66BRBOAProduct ID: 66BRBOA
Durable split-fitter gloves with extra wrist protection and a warm, winter-proof lining
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
Endura® 66BProduct ID: 66B
Built-tough, split-leather fitter gloves for rugged wear
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
Emerald CX® S13CXSIProduct ID: S13CXSI
Non-Marring 360° Cut Protection that Resists Adhesives, Liquid, and Heat
Our Emerald CX® S13CXSI gloves offer 360° cut protection with a silicone palm coating designed to resist the stickiest of adhesives, repel liquids, and protect hands from heat. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating. A reinforced thumb crotch reduces wear in critical areas.
Clutch Gear® MXGCETFLProduct ID: MXGCETFL
Here's how you handle the cold stuff - our Winter-lined Goatskin Mechanics Glove
Superior Glove was founded in Canada, so of course we know winter. Designed for harsh cold climates, these gloves feature a goatskin leather palm with split leather patches and thumb crotch for durability and excellent abrasion resistance. Thin, light, and warm C100 Thinsulate™ insulation helps our gloves achieve a -20C/-4F rating.
Contender™ SPGRKProduct ID: SPGRK
A high level of 360˚ cut protection in a comfortable, seamless string knit
These latex-free gloves are constructed with a 7-gauge filament fiber wrapped in aramid that offers 360˚ ANSI Level A6 cut protection and ANSI Heat Level 4 resistance. A unique spinning process ensures that the cut resistance is applied over the entire surface, while the seamless string knit boosts dexterity and comfort.
Dexterity® S7NTProduct ID: S7NT
Puncture-resistant general-purpose gloves that repel oil and moisture
These long-lasting, general-purpose gloves are constructed with a 100% cotton seamless knit shell that ensures ANSI Level 3 abrasion resistance and ANSI Level 4 puncture resistance. A high-quality nitrile coating repels oil and moisture, while a dexterous design improves flexibility and comfort. An additive in the nitrile coating makes these gloves 100% biodegradable.
Dexterity® SN15NTFBProduct ID: SN15NTFB
Puncture-resistant, general-purpose gloves that repel oils and solvents
Optimized for a wide range of tasks and activities, these general-purpose gloves are built from a durable, flexible fine-gauge nylon that delivers ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. An all-over nitrile coating repels oil, fuel, and other solvents, while an ergonomic design provides all day comfort.
Emerald CX® SCXLXProduct ID: SCXLX
The ultimate in cut and abrasion resistance combined with a strong grip
A latex palm coating provides these gloves with an excellent dry grip, while a blend of DuPont™ Kevlar® fiber, Wire-Core™ steel and polyester ensures ANSI Level A5 cut protection. For added safety, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
Endura® 378GOBDTKProduct ID: 378GOBDTK
Puncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
Dexterity® S10LXPBProduct ID: S10LXPB
Superior puncture resistance with a strong, steady grip
Hypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.
Chemstop™ NE250TRCProduct ID: NE250TRC
Chemical resistant, extended cuff gloves that guard against heat up to 204°C / 400°F
These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.
Clutch Gear® MXVSBPBProduct ID: MXVSBPB
Dexterous gloves with superior puncture resistance and cut protection
Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.