-
Endura® 361GTXLVB
Product ID: 361GTXLVBCold-rated winter mitt with impact protection and extreme cut resistance
Our Endura® 361GTXLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -20°C / -4°F. Leather is treated to resist liquids while the TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A8 cut resistance. Finger slots in the mitt help reduce hand fatigue when handling material.
-
Dexterity® S13BFNGP
Product ID: S13BFNGPBlack polyester gloves with patented palm strips for enhanced grip and durability
Our Dexterity® S13BFNGP knit gloves feature strategically placed, patented palm strips and foam nitrile coating for enhanced grip and durability. They are made from breathable dark colored polyester to hide dirt and stains making them ideal for general labor or other low hazard tasks.
-
Clutch Gear® MXPG
Product ID: MXPGSlim, flexible mechanic gloves with moderate cut protection
Thanks to a laminated spandex backing and leather palms, our slim profile Clutch Gear® MXPG mechanic gloves combine durability with improved hand movement and feeling. Leather wraps around the thumb and forefinger to reduce wear in traditional high stress wear areas while wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable.
Note: Sizes 3XL & 4XL are made to order
-
Endura® 398GDP
Product ID: 398GDPThe next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
-
TenActiv™ KTAG
Product ID: KTAGStay Cool and Cut-resistant sleeves
These tubular knit sleeves stay cool to provide long-lasting comfort in warm work conditions. Their tubular knit construction guards against abrasion hazards as well as dirt while providing ANSI Level A5 cut protection. Not intended for job sites that may pose a risk of sparks or flames.
-
Contender™ KFGCM
Product ID: KFGCMCut protecting sleeves that keep arms cool in warm working conditions
These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.
-
Contender™ SPGRK4
Product ID: SPGRK4Dexterous, durable 360° cut protection
These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.
-
Dexterity® SKFGFNLTC
Product ID: SKFGFNLTC360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 2 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.
-
Dexterity® SKFG2DFT
Product ID: SKFG2DFT360° cut-resistant, high grip gloves that provide all day comfort
These ambidextrous gloves are made from a fine-gauge knit that provides a superior level of dexterity and flexibility. They feature a DuPont™ Kevlar® fiber that provides 360° ANSI Level A4 cut protection without adding bulk, and benefit from a micropore grip nitrile coating on the fingertips that greatly enhances the grip.
-
Clutch Gear® MXGKGHVB
Product ID: MXGKGHVBHigh-visibility mechanic gloves with outstanding dexterity and 360° cut protection
Built from tough goatskin, these gloves feature impact resistant back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level A5 cut protection. They’re made with wide elastic straps for a comfortable, adjustable fit, and benefit from flexible foam-laminated spandex backs that improve dexterity. Leather-wrapped fingertips boost their durability, while a hi-viz backing increases worker visibility.
-
Endura® 378GOB
Product ID: 378GOBEasy-on goatskin gloves that resist oil and water
Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.
-
Contender™ SBKG
Product ID: SBKGBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.
-
Endura® 66Q
Product ID: 66QHighly durable, split-leather fitter gloves
These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.
-
Endura® 76YBDQ
Product ID: 76YBDQSweat absorbing, everyday gloves with added forearm protection
These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.
-
Endura® 76GR
Product ID: 76GRScrape and abrasion-resistant driver gloves with added forearm protection
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.
-
Endura® 76BFTL
Product ID: 76BFTLScrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.
-
Endura® 76B
Product ID: 76BScrape and abrasion-resistant driver gloves that lightly resist water and oil
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.
-
Endura® 66B
Product ID: 66BBuilt-tough, split-leather fitter gloves for rugged wear
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
-
KeepKleen® RDVPF
Product ID: RDVPF4 Mil Powder-Free Vinyl Industrial Grade Disposable Gloves
Our 4 Mil vinyl industrial grade disposable gloves offer excellent touch sensitivity and comfort as well as great economy and versatility, making these gloves ideal for food handling, janitorial, laboratory, pharmaceutical, science lab, security, and veterinarian applications.
-
KeepKleen® RDNUTBL
Product ID: RDNUTBLIndustrial grade 3.5 Mil Fine-Touch Black Powder-Free Nitrile Disposable Gloves
Our versatile industrial grade disposable nitrile gloves are 3.5 Mil thin for better touch sensitivity while still offering tear and puncture resistance. They are ideal for industries like tattoo artists, automotive maintenance, law enforcement, parts handling, janitorial, painting, electronics and hair stylists where users need protection and touch sensitivity.
-
KeepKleen® RDCNPF
Product ID: RDCNPFProtection, safety and high touch sensitivity. Blue Powder-Free Industrial Grade Disposable Nitrile Gloves.
These industrial grade disposable gloves provide excellent puncture and tear resistance. Ambidextrous and powder-free, these gloves are ideal for laboratories, food handling, parts handling, janitorial, and painting/finishing applications where protection and safety are as important as high touch sensitivity.
-
KeepKleen® RD8NPF
Product ID: RD8NPFThicker industrial grade blue disposable gloves
Our KeepKleen® RD8NPF industrial grade food safe disposable gloves are made with thicker nitrile for better durability and tear resistance. Ambidextrous and powder-free, they contain no natural rubber latex that may cause allergies.
-
KeepKleen® RD8BNPF12
Product ID: RD8BNPF12A more durable disposable - 8 mil 12" Powder-free Nitrile Industrial Grade Gloves
Made with thicker nitrile for better puncture resistance, these industrial grade disposable gloves contain no natural rubber latex that may cause allergies. Ambidextrous and powder-free, these gloves have been tested with fentanyl are suited for parts handling, janitorial, painting/finishing, and tattoo/piercing applications.
-
Clutch Gear® MXVSBPB
Product ID: MXVSBPBDexterous gloves with superior puncture resistance and cut protection
Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.