Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE

  • Sure Knit™ SLSXB

    Product ID: SLSXB

    Fully washable, antimicrobial sleeves with extreme cut protection

    Ideal for food processing tasks that involve a high risk of lacerations, these fully washable sleeves provide ANSI Level A8 cut protection. Treated with an active agent to achieve 99.9% antimicrobial status, they can be safely laundered in temperatures up to 85°C / 185°F. An attachable clip at the bicep prevents slippage, while a latex-free construction reduces the risk of allergic reactions. At 21 inches in length, these sleeves provide maximum coverage. They are also FDA and CFIA-compliant.

  • Contender™ KPXT

    Product ID: KPXT

    Fire- and cut-resistant sleeves that stay in place

    Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.

  • TenActiv™ KPSTA18TH

    Product ID: KPSTA18TH

    Extreme cut protection sleeves with twice the amount of stretch

    These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A9 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.

  • Contender™ KPG1T22TH

    Product ID: KPG1T22TH

    Cut resistant sleeves that stay in place

    A tapered fit combined with functional thumbholes and STAYz-UP™ elasticized biceps ensure these cut-resistant sleeves stay in place until the job is done. Constructed from a single layer of high-tenacity/composite filament fiber, these sleeves provide ANSI Level A5 cut protection to keep your arms safe from cut hazards. They’re fully washable for easy refresh and long-lasting product wear.

  • Contender™ KGC1T

    Product ID: KGC1T

    Flame-resistant sleeves that defend against cuts, punctures and abrasion

    A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 2 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.

  • Contender™ KG/CE22TH

    Product ID: KG/CE22TH

    Cut-resistant tubular sleeves that stay put

    A tubular design and STAYz-UP™ elasticized armbands prevent sliding and provide a snug, reliable fit. Para-aramid and composite filament fiber yarn protects arms by delivering ANSI Level A4 cut protection.   Fully washable for easy cleaning and product longevity. Thanks to a silicone-free construction, these sleeves are ideal for handling surfaces prior to painting.

  • Contender™ KBKB1T

    Product ID: KBKB1T

    Flame-retardant, cut-resistant sleeves optimized for welding work

    Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.

  • Dragon™ TK835LG2

    Product ID: TK835LG2

    Triple-layer gloves for high heat protection up to (320°C) 608°F

    A triple-layer construction that features a Twaron® outer shell, a 100% cotton terry liner and a leather lined front and back allows these gloves to work safely in temperatures of up to 608°F (320°C). Their 4″ leather gauntlet cuffs provide extra protection to keep wrists safe.

  • Cool Grip® TBMOB

    Product ID: TBMOB

    17” baker's mitts that repel oil and water

    These tough 17″ baker’s mitts are made from a preshrunk, heavyweight cotton and feature an Oilbloc™️ treatment that repels oil and water. They’re fully lined with 11oz of knit cotton for extra comfort and insulation and are fully CFIA-compliant for safe hood handling. Extra-strong, pre-serged inside seams and reinforced Twaron® thumb patches increase their lifespan.

  • Cool Grip® SPGC/A

    Product ID: SPGC/A

    Insulated, heat resistant gloves with 360° cut protection

    Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.

  • North Sea™ N230FLK

    Product ID: N230FLK

    Fleece-lined fishing gloves that provide winter protection down to -15°C / 5°F

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.

  • North Sea™ N230FL

    Product ID: N230FL

    Fishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.

  • Contender™ TRFGK

    Product ID: TRFGK

    High heat and cut-resistant gloves with a grip that doesn’t quit

    Intended for use in metal stamping, these gloves are made from a terry knit fabric with a composite filament fiber that provides 360° ANSI Level A5 cut protection and ANSI Level 5 heat resistance. The longer length of its knit-wrist cuffs increases comfort, and cotton interwoven into the fabric blend absorbs grease and oil for a strong grip.

  • Cool Grip® SPGRK/A

    Product ID: SPGRK/A

    High cut resistance combined with heat protection up to 260°C / 500°F

    Designed for handling moderately hot parts during rubber and plastic manufacturing, these gloves are made from a unique blend of yarns that provides 360° ANSI Level A6 cut protection and ANSI Level 4 heat resistance. A glove-within-a-glove design traps air in to increase insulation. Its knit construction provides a high level of comfort and dexterity.

  • Cool Grip® SPFGSS

    Product ID: SPFGSS

    High level heat resistance that doesn’t compromise on comfort

    These gloves are made from a polyester and composite fiber blend that provides ANSI Level A5 heat resistance without sacrificing dexterity. Strategically placed silicone strips at the palms increase their lifespan, while an ergonomic shape conforms to the hands’ natural contours, ensuring a high level of comfort.

  • Cool Grip® SKX-W4

    Product ID: SKX-W4

    360°cut protection matched with heat resistance and added forearm protection

    These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance. They feature 4″ gauntlet cuffs for enhanced forearm protection. Their 100% knit terry liner traps air in to provide further protection from thermal contact. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.

  • Dexterity® SKG/PXNE

    Product ID: SKG/PXNE

    Arc Flash rated gloves that stand up to heat and cold

    The combination of DuPont™ Kevlar® fiber and Protex® yarns provides these gloves with 360° ANSI Level A5 cut resistance and ANSI Level 4 heat resistance. Their lining ensures that hands stay warm in temperatures down to -5°C / 23°F, and a flame-resistant neoprene palm coating provides a strong, steady grip in wet or dry conditions. They’re capable of offering protection from heat in temperatures up to 260°C / 500°F and feature a level 3 Arc Flash rating.

  • Endura® 365DLX6

    Product ID: 365DLX6

    Built tough leather gloves with extended high-viz cuffs

    A 6″ gauntlet cuff that features retroreflective silver strips provides these resilient horsehide leather gloves with a superior degree of visibility. Sewing thread is made with para-aramid fiber for added seam integrity. A high level of water, oil, and stain resistance heighten their durability. A performance patch at the thumb and palm increases dexterity.

  • Endura® 365DLX2TL

    Product ID: 365DLX2TL

    Durable, high visibility lineman gloves for warmth down to -10°C / 14°F

    These heavyweight horsehide leather gloves feature retroreflective silver strips along their 2″ cuffs for enhanced visibility. Flexible Thinsulate™ lining provides cold-proofing in temperatures down to -10°C / 14°F . Sewing thread is made with Kevlar® fiber for added seam integrity. A reinforced leather palm provides this high-use area with extra strength. Treated to resist water, oil and stains.

  • Cool Grip® SKPX/PSS

    Product ID: SKPX/PSS

    360° cut protection matched with superior flame and spark resistance

    Made from a blend of DuPont™ Kevlar® fiber and Protex® yarns that provide 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance, these 7-gauge double-layer gloves are a perfect match for any job that presents cut hazards in high heat. Silicone strips at the palm increase their grip and heat resistance, and inner gloves made from high-bulk polyester give them a soft, comfortable fit.

  • Endura® 365DLXDTL

    Product ID: 365DLXDTL

    Hi-Viz lineman gloves built for warmth down to -20°C / -4°F

    200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -20°C / -4°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.

  • Endura® 361DLXFTL

    Product ID: 361DLXFTL

    Heavy-duty winter mitts designed with the lineman in mind

    These winter mitts are built with a heavyweight horsehide leather that’s reinforced at the palm and thumb to increase durability, especially in critical high-wear areas. Their Thinsulate™ lining keeps hands warm in temperatures down to -20°C / -4°F, and a Waterstop™ treatment repels water and oil. A one-finger design increases dexterity, and silver strips with hi-viz overlay at the cuffs provide enhanced visibility. These heavy duty winter mitts are also designed to offer excellent puncture protection.

  • Endura® 69BSKFFL

    Product ID: 69BSKFFL

    Heavy-duty work gloves that fuse a durable construction with 360° cut protection

    These tough split-leather gloves are lined with TenActiv™ to offer ANSI A5 cut resistance with 360° cut protection. Sewing thread is made with para-aramid for added seam integrity while a gunn-cut pattern prevents the seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.

  • Clutch Gear® MXVSBPB

    Product ID: MXVSBPB

    Dexterous gloves with superior puncture resistance and cut protection

    Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.