Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Endura® 365DLX6KG

    Product ID: 365DLX6KG

    Cut-resistant lineman gloves with extended hi-viz cuffs for visibility

    Our Endura® 365DLX6 lineman gloves protect hands from cuts and feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas and a ParaActiv™ engineered yarn liner that offers 360° cut protection with moderate ANSI A4 cut resistance. These gloves are treated to repel water, liquids, and stains.

  • Endura® 378GTAXOT

    Product ID: 378GTAXOT

    High cut-resistant leather gloves with orange fingertips for visibility

    Our Endura® 378GTAXOT leather gloves offer cut resistance with hi-viz orange fingertips for better finger visibility and safety. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and a keystone thumb design that maximizes durability for a longer wear life.

  • Endura® 361DLXTKG

    Product ID: 361DLXTKG

    Lineman mitts with 360° cut resistance that keep hands warm down to -15°C / 5°F

    These cowgrain leather mitts meet the ANSI/ ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands.

    They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F.

    Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection.

  • Endura® 378GOBTX

    Product ID: 378GOBTX

    Goatskin driver gloves with short cuffs that resists oil and water, along with a maximum cut liner

    Our Endura® 378GOBTX goatskin driver gloves are treated with Oilbloc™ to resist oil and water, as well as short cuffs and ANSI Cut Level A9 TenActiv liner. The short cuffs are a safety cuff and the seamless knit liner ensures a more soft, cooler, and comfortable fit. The goatskin leather provides more dexterity and durability. Ideal for working in high cut hazard conditions where oil and water resistance is needed.

  • Endura® 361GTLVB

    Product ID: 361GTLVB

    Cold-rated winter mitt with impact protection plus knit cuffs to keep out debris and hazards

    Our Endura® 361GTLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -35°C / -31°F. Leather is treated to resist liquids while the knit cuffs to help keep out dirt, debris, and other hazards. Finger slots in the mitt help reduce hand fatigue when handling material.

  • Endura® 399GCXL5

    Product ID: 399GCXL5

    All-round fabrication gloves with maximum cut protection for material handling

    Our Endura® 399GCXL5 FR gloves offer maximum cut protection, making them ideal for material handling where cut hazards are present. These all-round fabrication gloves are made with material designed to resist flame and feature a ParaActiv™ engineered yarn liner for 360° cut protection with extreme ANSI A9 cut resistance and ANSI 2 heat protection. Extended gauntlet cuffs provide extra wrist protection.

  • Endura® 378TXTVBE

    Product ID: 378TXTVBE

    Economical 360° cut resistance and impact protection for temperatures down to -20°C / -4°F

    Our economy choice Endura® 378TXTVBE gloves for cut resistant winter protection in temperatures down to -20°C / -4°F. TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A7 cut resistance while unpadded palms offer a wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails. Back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.

  • Endura® 399GKGTL5

    Product ID: 399GKGTL5

    Moderate cut protection with extended gauntlet cuffs and protection from cold down to -20°C / -4°F

    Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.

  • Endura® 378GOTXVB

    Product ID: 378GOTXVB

    Premium leather with liquid resistance that protects against cuts and impact

    Our Endura® 378GOTXVB gloves are liquid resistant and feature TenActiv™ engineered yarn liners to provide 360° cut protection with ANSI A6 cut resistance. These gloves are unpadded for a better sense of touch and wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails in oil and gas. The reinforced back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.

  • Endura® 361GTXLVB

    Product ID: 361GTXLVB

    Cold-rated winter mitt with impact protection and extreme cut resistance

    Our Endura® 361GTXLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -20°C / -4°F. Leather is treated to resist liquids while the TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A8 cut resistance. Finger slots in the mitt help reduce hand fatigue when handling material.

  • Endura® 399GKGL5L

    Product ID: 399GKGL5L

    MIG welding gloves designed for a woman’s hands

    Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with blended aramid provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Testing places these gloves at an arc flash level 3 rating, and ANSI level 3 heat rating.

  • Endura® 378SB

    Product ID: 378SB

    General purpose gloves with cowgrain palms and split leather back to balance durability and flexibility

    Our Endura® 378SB gloves feature cowgrain palms for durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The wing style thumb design, split leather back of hand, and elasticized wrists offer flexibility and a snug fit for all day comfort.

  • Endura® 370DTIGL

    Product ID: 370DTIGL

    TIG welding gloves designed for a lady's hands for better fit and protection

    Deer skin TIG welding gloves sized for ladies are designed with a cushioned patch on the pinky side to improve longevity and comfort while welding, and sewn with DuPont™ Kevlar® fiber to reduce the likelihood of getting burnt out when exposed to heat. The deer skin leather provides a high combination of durability, dexterity, and a fine sense of touch without forfeiting flexibility.

  • Endura® 398KGLBGL

    Product ID: 398KGLBGL

    MIG welding gloves designed for women's hands for better fit and protection

    Our Endura® 398KGLBGL MIG welding gloves are designed to protect against heat and cuts and fitted for women’s hands. They feature 6″ gauntlet cuffs for added forearm protection while the cushioned wrists increase comfort when welding for extended periods. Padded cowgrain palms offer additional comfort when material handling and back-of-hand fleece lining provides ANSI 2 heat resistance.

  • Endura® 685BFI

    Product ID: 685BFI

    Aluminized gloves for long sessions of stick welding

    Our Endura® 685BFI gloves feature reflective foam lining that protects against radiant heat and sparks with ANSI 4 heat protection. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.

  • Endura® 378TXTVB

    Product ID: 378TXTVB

    Winter gloves with high cut resistance, cushioned palms for material handling, and warmth down to -25°C / -13°F

    Our Endura® 378TXTVB gloves include reinforced back-of-hand protection and a TenActiv™ liner for high, ANSI A6 cut resistance with 360° cut protection. These water / oil-resistant driver style gloves feature a padded palm that helps dull vibrations and cushions hands when handling heavy parts, while the comfortable liner keeps hands warm down to -25°C / -13°F.

  • Endura® 365DLX2TKG

    Product ID: 365DLX2TKG

    Cold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs

    Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.

  • Endura® 361DLX6

    Product ID: 361DLX6

    Lineman mitts with extended hi-viz cuffs

    Our Endura® 361DLX6 lineman mitts feature hi-viz 6-inch cuffs with retroreflective tape for better visibility. Made from durable leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear.

  • Endura® 304TXTL

    Product ID: 304TXTL

    Keep hands safe from cuts and cold with protection down to -35°C / -31°F

    Our Endura® 304TXTL slip-on mitts feature a cut-resistant TenActiv™ liner to protect against sharp objects and keep hands warm down to temperatures of -35°C / -31°F. Their elasticized wrists and faux fur cuffs block out cold to retain warmth in frigid conditions while a pair of plastic clips ensures they won’t be separated in storage.

  • Endura® CG0SKT

    Product ID: CG0SKT

    Cover gloves for Class 0 / Class 00 low voltage gloves

    Our Endura® CG0SKT cover gloves are tailored to fit over our Line Pro NR0 Class 0 and NR00 Class 00 low voltage rubber gloves for work with energized equipment. Their keystone thumb design maximizes durability and dexterity, while an adjustable nylon black strap provides a snug fit when worn with rubber liner gloves.

  • Endura® CG1SS

    Product ID: CG1SS

    Cover gloves for Class 1 medium voltage gloves

    Our Endura® CG1SS cover gloves are tailored to fit over our Line Pro NR1BR36 Class 1 medium voltage rubber gloves for work with energized equipment. Their keystone thumb design maximizes durability and dexterity, while an adjustable nylon black strap provides a snug fit when worn with rubber liner gloves.

  • Endura® CG2SS

    Product ID: CG2SS

    Cover gloves for Class 2 voltage insulating rubber gloves

    Our Endura® CG2SS cover gloves are tailored to fit over our Line Pro NR2BR36 Class 2 medium voltage rubber gloves for work with energized equipment. Their keystone thumb design maximizes durability and dexterity, while an adjustable nylon black strap provides a snug fit when worn with rubber liner gloves.

  • Endura® 76BNG

    Product ID: 76BNG

    Fitter-style gloves that defend against nail gun injuries

    Our Endura® 76BNG fitter style gloves feature strategically placed ballistic plating to protect against nail gun misfires and malfunctions. Palms, fingertips, and knuckles are reinforced with leather for durability while a safety cuff allows workers to don and remove the gloves with ease. Available in left-hand (Endura® 76BNGLH) and right-hand (Endura® 76BNGRH) versions.

  • Endura® 378GTXVBE

    Product ID: 378GTXVBE

    Dexterous and economical driver gloves that protect against cuts and impact

    Our Endura® 378GTXVBE gloves feature a blended composite filament lining that offers 360° cut protection with ANSI Level A5 cut resistance. These economical gloves are unpadded for a better sense of touch and wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails in oil and gas. The reinforced back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.