Product ID: 398GDP
The next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
Product ID: 378GOBKVB
Arc Flash-rated driver gloves that resist oil, water, punctures, and cuts
These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.
Product ID: STAGFNP
Lightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
Product ID: 246FFL
Chemical resistant, extended-length gloves that guard against heat up to 200°C / 392°F
These heavy-duty neoprene gloves come in an extra-long 18″ length to provide a superior level of protection against oils, chemicals, acids and caustics. A cotton shell improves comfort while absorbing sweat, and their thermal lining provides ANSI Level 3 heat resistance. They can be easily sanitized by washing and rinsing in the sink.
Product ID: TRFGK
Heat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
Product ID: SKFGFNLTC
360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 2 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.
Product ID: SKFG2DFT
360° cut-resistant, high grip gloves that provide all day comfort
These ambidextrous gloves are made from a fine-gauge knit that provides a superior level of dexterity and flexibility. They feature a DuPont™ Kevlar® fiber that provides 360° ANSI Level A4 cut protection without adding bulk, and benefit from a micropore grip nitrile coating on the fingertips that greatly enhances the grip.
Product ID: 378GKGE
Economic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
Product ID: SPGRK
A high level of 360˚ cut protection in a comfortable, seamless string knit
These latex-free gloves are constructed with a 7-gauge filament fiber wrapped in aramid that offers 360˚ ANSI Level A6 cut protection and ANSI Heat Level 4 resistance. A unique spinning process ensures that the cut resistance is applied over the entire surface, while the seamless string knit boosts dexterity and comfort.
Product ID: K825KP
Cut-resistant gloves that can handle extreme heat
Seamlessly knit from DuPont™ Kevlar® fiber, this glove from our Dragon™ series provides heat protection in temperatures up to 320°C / 608°F while preserving dexterity and comfort. Its 100% wool terry liner offers further protection from heat, making it ideal for use in injection molding or handling hot materials. It also offers ANSI Level A4 cut protection. Elasticized wrists guarantee a snug fit.
Product ID: NE250TRC
Chemical resistant, extended cuff gloves that guard against heat up to 204°C / 400°F
These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.
Product ID: 378GHVTL
Hi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
Product ID: 378GAX
Abrasion resistant driver gloves crafted with comfort in mind
Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.
Product ID: SPGRK2D
Highly cut resistant gloves with an enhanced grip
These gloves are made from a DuPont™ Kevlar® fiber blended yarn that provides 360° ANSI Level A6 cut protection and feature a seamless knit for outstanding levels of comfort and dexterity. PVC dots at the front and back of the hand increase grip without sacrificing flexibility, and an ambidextrous design lengthens the gloves’ lifespan.
Product ID: SKGPNVB
Impact and oil-resistant gloves with 360° cut protection
These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.
Product ID: SKFGFNVB
Impact and cut resistant gloves with a steady grip
These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.
Product ID: 240TKL
Heat resistant gloves that safeguard against chemicals
These heavy-duty neoprene gloves protect against a wide range of oils and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. Rated ANSI Level 3 resistant for protection up to 200°C / 392°F. Terry lining provides further protection from thermal contact and diamond-grip finish palms ensure a strong grip.