• Dexterity® S18KGDNE

    Product ID: S18KGDNE
  • TenActiv™ S18TAFGFNF

    Product ID: S18TAFGFNF
  • Emerald CX® S10NXFNLT

    Product ID: S10NXFNLT
  • Emerald CX® S13CXSI

    Product ID: S13CXSI

    Our Emerald CX® S13CXSI gloves offer 360° cut protection designed to resist the stickiest of adhesives, repel liquids, and protect hands from heat. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating.

  • TenActiv™ STAWLP

    Product ID: STAWLP

    Ideal for metal stamping applications in warm working conditions, our new STAWLP gloves provide cool dexterity and comfort and long lasting durability. A Protex outer layer offers spark and heat resistance while a TenActiv™ knit shell offers rugged durability. The gloves are also rated for ANSI Level A6 cut resistance and Level 4 puncture resistance for well-rounded protection.

  • TenActiv™ STAGLXPB

    Product ID: STAGLXPB

    Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.

  • TenActiv™ STAGCTPU

    Product ID: STAGCTPU

    When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.

  • TenActiv™ STAGBLPVB

    Product ID: STAGBLPVB

    Featuring exclusive ErgoHyde palms, these gloves provide maximum grip and durability on wet or oily surfaces while taking comfort and dexterity to a new level. Our ErgoHyde palm averages twice the grip of typical leather palms and its exclusive thermoforming technology creates an ergonomic fit for a natural feeling palm that optimizes dexterity. We’ve paired this with a knit glove body to add flexibility and breathability while Oilbloc™ ensures palms repel water and oil. These gloves also feature 360° cut resistance, flexible impact protection, and puncture-resistant palms. ​​

  • Chemstop™ S15KGVNVIB

    Product ID: S15KGVNVIB

    Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.

  • Endura® 378GCXVB

    Product ID: 378GCXVB

    Our new 378GCXVB gloves bring maximum cut resistance to our impact protection offering. The lining is made with DuPont™ Kevlar® fiber which provides 360° ANSI Level A9 cut protection while the flexible back-of-hand plate offers ANSI Level 2 impact protection – all in a highly durable leather shell that resists oil and water. Originally designed for use in oil and gas applications, these versatile gloves are useful for high-hazard applications in mining, forestry, construction, and other industries where cut and impact risks can be high.

  • Endura® 378GTXOTL

    Product ID: 378GTXOTL

    For users in warm environment industries, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable and more breathable than other liner materials. They also incorporate our latest in palm-grip technology to improve dexterity, stability, and durability. Thinsulate™ -lined to achieve a winter rating of -30C/-22F, these gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4.

  • Endura® 378GTXOT

    Product ID: 378GTXOT

    For users in cold/winter environments, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable, and more breathable than other liner materials. They also incorporate our latest in palm-grip technology to improve dexterity, stability, and durability. These gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4.

  • TenActiv™ KTAG18

    Product ID: KTAG18

    These tubular knit sleeves stay cool to provide long-lasting comfort in warm work conditions. Their tubular knit construction guards against abrasion hazards as well as dirt while providing ANSI Level A5 cut protection. Not intended for job sites that may pose a risk of sparks or flames.

  • Contender™ KPXWE

    Product ID: KPXWE

    Optimized for jobs with a high risk of exposure to sparks or flames, these tubular sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their STAYz-UP™ elastic armbands with polymer dots prevent slippage, while ANSI Level A2 cut protection defends arms from minor scrapes and cuts.

  • Contender™ KFGCM

    Product ID: KFGCM

    These sleeves combine ANSI Level A5 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.

  • Contender™ SPGRK

    Product ID: SPGRK

    These latex-free gloves are constructed with a 7-gauge filament fiber wrapped in aramid that offers 360˚ ANSI Level A6 cut protection. A unique spinning process ensures ANSI Level 2 abrasion resistance over the entire surface, while the seamless string knit boosts dexterity and comfort.

  • Emerald CX® SCXLX

    Product ID: SCXLX

    A latex palm coating provides these gloves with an excellent dry grip, while a blend of DuPont™ Kevlar® fiber, Wire-Core™ steel and polyester ensures ANSI Level A5 cut protection. For added safety, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Endura® 378GOBKVB

    Product ID: 378GOBKVB

    These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.

  • Dragon™ K825KP

    Product ID: K825KP

    Seamlessly knit from 100% DuPont™ Kevlar® fiber, this glove from our Dragon™ series provides heat protection in temperatures up to 260°C / 500°F while preserving dexterity and comfort. Its 100% wool terry liner offers further protection from heat, making it ideal for use in injection molding or handling hot materials. It also offers ANSI Level A5 cut protection. Elasticized wrists guarantee a snug fit.

  • Dexterity® S10LXPB

    Product ID: S10LXPB

    Hypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.

  • Clutch Gear® MXVSBPB

    Product ID: MXVSBPB

    Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.

  • Clutch Gear® MXVSB

    Product ID: MXVSB

    These mechanic gloves match a superior level of dexterity with impact-resisting features including back-of-the-hand protection. Their PVC Sure Grip® palm patches provide a strong, steady grip while affording extra protection to the fingertips, and DuPont™ Kevlar® fiber thumb patches reinforce a high-stress area to further enhance durability. Velcro cuffs ensure a comfortable and adjustable fit.

  • Clutch Gear® MXGKGHVTL

    Product ID: MXGKGHVTL

    Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, and a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable, and C100 Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F.

  • Superior® MMG

    Product ID: MMG

    A seamless chainmail construction made from stainless-steel rings provides 360° ANSI Level A9 cut protection. Aside from their powers to resist cuts, corrosion, fats and oils, the rings also provide a high level of flexibility and dexterity. The gloves can be easily cleaned in the sink and feature a bacteria-resistant wristband that reduces the risk of contamination. A convenient, hand reversible design provides ease of use. These gloves are also FDA and CFIA-compliant.

  • Endura® 378GKGDT

    Product ID: 378GKGDT

    These versatile goat and grain gloves benefit from ultra-warming C200 Thinsulate™ lining, which provides a double layer of insulation to guarantee warmth down to temperatures of -20°C / -4°F. At the same time, a keystone thumb ensures comfort and durability, and DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 5 puncture resistance.

  • Contender™ SPGRK2D

    Product ID: SPGRK2D

    These gloves are made from a DuPont™ Kevlar® fiber blended yarn that provides 360° ANSI Level A6 cut protection and feature a seamless knit for outstanding levels of comfort and dexterity. PVC dots at the front and back of the hand increase grip without sacrificing flexibility, and an ambidextrous design lengthens the gloves’ lifespan.

  • Action™ SKLP

    Product ID: SKLP

    These string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester, provide 360° ANSI Level A5 cut protection and flame resistance. Their leather palms increase comfort and durability, while providing a strong, steady grip which makes these gloves an ideal choice when handling heavy metal parts and glass or sharp objects.

  • Dexterity® SKGPNVB

    Product ID: SKGPNVB

    These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.

  • Dexterity® SKFGFNVB

    Product ID: SKFGFNVB

    These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.

  • Superior Touch® S13SXGPU

    Product ID: S13SXGPU

    These CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.

  • TenActiv™ STAGHVPN

    Product ID: STAGHVPN

    A stronger-than-steel TenActiv™ yarn gives these gloves ANSI Level A5 cut protection, and a hi-viz knit shell increases their visibility. A micropore nitrile coating ensures an excellent grip even on wet and oily surfaces, and a reinforced thumb crotch extends their lifespan by reducing wear in high-stress areas. They’re made touchscreen compatible so you never need to remove your gloves as you move between tasks.

  • Endura® 365DLXTKG

    Product ID: 365DLXTKG

    These heavyweight cowgrain leather gloves benefit from DuPont™ Kevlar® fiber for 360° cut protection that meets ANSI Level A4 . The 6″ gauntlet cuffs feature two 3M™ retroreflective silver strips enhanced by high-viz bands, meeting the ANSI/ISEA 107-2015 standard for high visibility. They provide an excellent level of water, oil and stain resistance, and feature split-leather at the cuffs. They are also Thinsulate™-lined for winter protection in temperatures down to -15°C / 5°F.

  • Sure Knit™ SLSXB

    Product ID: SLSXB

    Ideal for food processing tasks that involve a high risk of lacerations, these fully washable sleeves provide ANSI Level A8 cut protection. An Ultra-Fresh treatment ensures a 99.9% antimicrobial status, and they can be safely laundered in temperatures up to 85°C / 185°F. An attachable clip at the bicep prevents slippage, while a latex-free construction reduces the risk of allergic reactions. At 21 inches in length, these sleeves provide maximum coverage. They are also FDA and CFIA-compliant.

  • TenActiv™ KTAG

    Product ID: KTAG

    These cool-to-the-touch sleeves provide relief from the heat while ensuring ANSI Level A2 cut protection. Thanks to their STAYz-UP™ elasticized armbands, sleeves will stay in place to provide all-day arm protection from cuts, dirt, and abrasion.

  • TenActiv™ KTAFGT

    Product ID: KTAFGT

    Designed with sheet metal handling in mind, these sleeves are made from a stronger-than-steel TenActiv™ yarn that provides ANSI Level A5 cut protection. Elasticized armbands with grip-improving polymer dots and thumbholes keep sleeves in place, while a silicone-free construction optimizes them for working with metals that will later be painted.

  • Contender™ KPXT

    Product ID: KPXT

    Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.

  • Cutban™ KPW

    Product ID: KPW

    These tubular knit sleeves provide a comfortable yet durable fit. Made from double-layer, high-tenacity filament yarn that protects hands from cut hazards, they offering ANSI Level A2 cut protection. They’re fully launderable for easy refresh and available in five different lengths with optional thumbholes for added comfort and convenience.

  • TenActiv™ KPSTA18TH

    Product ID: KPSTA18TH

    These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A8 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.

  • Contender™ KPG1T22TH

    Product ID: KPG1T22TH

    A tapered fit combined with functional thumbholes and STAYz-UP™ elasticized biceps ensure these cut-resistant sleeves stay in place until the job is done. Constructed from a single layer of high-tenacity/composite filament fiber, these sleeves provide ANSI Level A5 cut protection to keep your arms safe from cut hazards. They’re fully washable for easy refresh and long-lasting product wear.

  • Cutban™ KP1T

    Product ID: KP1T

    These sleeves are constructed from a single-layer filament yarn that provides ANSI Level A2 cut protection. Their tapered construction and STAYz-UP™ elasticized biceps provide added comfort and ensure they stay in place during long work hours. These sleeves are available in silicone-free and Lycra-free versions, as well as with or without thumbholes.

  • Contender™ KGC1T

    Product ID: KGC1T

    A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 2 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.

  • Contender™ KG/CE22TH

    Product ID: KG/CE22TH

    A tubular design and STAYz-UP™ elasticized armbands prevent sliding and provide a snug, reliable fit. Para-aramid and composite filament fiber yarn protects arms by delivering ANSI Level A4 cut protection. The fabric’s fire-resistant (FR) aramid blend further enhances safety, ensuring that sleeves do not burn, melt, or drip. Fully washable for easy cleaning and product longevity. Thanks to a silicone-free construction, these sleeves are ideal for handling surfaces prior to painting.

  • Contender™ KFG

    Product ID: KFG

    These sleeves are equipped with an aramid-encased, composite filament fiber yarn that provides ANSI Level A4 cut protection. Their flame-resistant properties provide added protection, ensuring that sleeves will not burn, melt or drip, and these sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.

  • Contender™ KBKB

    Product ID: KBKB

    Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.

  • Contender™ KAW1C10

    Product ID: KAW1C10

    Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

  • Contender™ KAWC

    Product ID: KAWC

    Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.

  • TenActiv™ STAGFNP

    Product ID: STAGFNP

    A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 4 palm puncture resistance.

  • Dexterity® TKTAGLX

    Product ID: TKTAGLX

    These cut resistant, insulated gloves are optimized for mild-winter work. Constructed from a blend of terry and high-performance polyethylene that ensures ANSI Level A3 cut protection and ANSI Level 4 puncture resistance, their napped lining keeps hands warm in temperatures down to -15°C / 23°F without adding bulk. An orange backing improves visibility.

  • TenActiv™ S21TAXFN

    Product ID: S21TAXFN

    These touchscreen-compatible, 21-gauge gloves are the closest you can get to a barehand feel while still achieving a high level of cut resistance. Their TenActiv™ wire-core composite filament fiber blend ensures 360° ANSI Level A5 cut protection, while a foam nitrile coating at the palms provides a secure grip on lightly oiled parts. For added protection, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • TenActiv™ S18WTLFN

    Product ID: S18WTLFN

    This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ 18-gauge knit assures ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.

  • TenActiv™ S18WTFN

    Product ID: S18WTFN

    These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.

  • TenActiv™ S18TAXFN

    Product ID: S18TAXFN

    These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.

  • TenActiv™ S18TATLFN

    Product ID: S18TATLFN

    These multi-use gloves feature an acrylic terry liner that keeps hands warm in temperatures down to -5°C / 23°F. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance without sacrificing dexterity. A foam nitrile coating at the palms guarantees a sturdy grip while working on oily surfaces.

  • TenActiv™ S13TAXFN

    Product ID: S13TAXFN

    Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Endura® 398OBPB

    Product ID: 398OBPBLH

    Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 4 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A4 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.

  • Endura® 378KGVB

    Product ID: 378KGVB

    These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A5 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.

  • TenActiv™ STAGFNFC

    Product ID: STAGFNFC

    Thanks to crush-resistant finger caps, these gloves protect fingertips against pinch-point hazards as well as crush, impact, cut, and puncture hazards. In addition, their 13-gauge knit TenActiv™ shell provides 360° cut resistance with ANSI Level A4 cut protection. A foam nitrile palm coating has been added to offer a strong, steady grip on slippery surfaces, and a reinforced thumb crotch prolongs the glove’s lifespan.

  • Endura® 378GKG4P

    Product ID: 378GKG4P

    This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².

  • Dragon™ TK835LG2

    Product ID: TK835LG2

    A triple-layer construction that features a Twaron® outer shell, a 100% cotton terry liner and a leather lined front and back allows these gloves to work safely in temperatures of up to 608°F (320°C). Their 4″ leather gauntlet cuffs provide extra protection to keep wrists safe.

  • TenActiv™ STAGBPU

    Product ID: STAGBPU

    These gloves are knit from a non-linting continuous filament yarn that’s stronger than steel and provides ANSI Level A4 cut protection. Their palms are coated with polyurethane that increases grip and adds a bare-hand feel. Thanks to a black coloration that hides dirt, you won’t have to wash them between every job.

  • Cool Grip® SPGC/A

    Product ID: SPGC/A

    Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.

  • Cool Grip® SKX-W

    Product ID: SKX-W

    These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A5 cut protection and ANSI Level 5 heat resistance. Their 100% knit terry liner traps air in to provide further protection from thermal contact while also insulating against cold. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.

  • Emerald CX® SCXPNTFC

    Product ID: SCXPNTFC

    These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.

  • TenActiv™ S18TAGOFN

    Product ID: S18TAGOFN

    A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.

  • TenActiv™ S18TAGGFN

    Product ID: S18TAGGFN

    A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice for working with sensitive electronics.

  • TenActiv™ S18TAFGPU

    Product ID: S18TAFGPU

    These 18-gauge knit gloves feature a polyurethane coating that enhances dexterity and a bare-hand feel while also providing a strong and comfortable grip. Their naturally cool TenActiv™ yarn prevents hands from overheating while offering ANSI Level A4 cut protection. These gloves are an outstanding choice for jobs that require working with small parts where a strong grip is required.

  • TenActiv™ S18TAFGNT

    Product ID: S18TAFGNT

    These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.

  • TenActiv™ S18TAFGFN

    Product ID: S18TAFGFN

    These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. An Ultra-Fresh treatment blocks bacterial growth, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.

  • Dexterity® S18KGFN

    Product ID: S18KGFN

    ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with Ultra-Fresh to prevent bacterial growth. They’re also touchscreen compatible for added convenience.

  • TenActiv™ S15TAFGPU

    Product ID: S15TAFGPU

    A high level of dexterity and ANSI Level A2 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.

  • Chemstop™ S15KGV30N

    Product ID: S15KGV30N

    When a job presents the risk of cuts and chemical exposure, these Chemstop™ gloves should be your first line of defense. They’re fully aramid lined for ANSI Level A4 cut protection and feature a red PVC base coating that guards against chemicals and solvents. Gauntlet cuffs provide additional protection to the forearms, and a black nitrile coating that resists oil ensures a steady grip even on slick surfaces. They’re ergonomically shaped for high levels of comfort and dexterity.

  • TenActiv™ S13TAWFN

    Product ID: S13TAWFN

    Rated ANSI Level A9 cut resistant, these TenActiv™ gloves are made from a 13-gauge construction that provides an extreme level of protection without sacrificing dexterity. A foam nitrile coating at the palms ensures a solid grip on lightly oiled parts. They’re designed to be fully launderable, allowing for a fast and convenient refresh, and an extended product life.

  • TenActiv™ S13TAPUCF

    Product ID: S13TAPUCF

    Perfect for electronics manufacturing, these gloves are made from a 13-gauge TenActiv™-blended yarn that provides ANSI Level A2 cut protection, and also benefits from anti-static carbon filament. It’s polyurethane palm coating ensures a steady grip, and its touchscreen compatible design adds convenience.

  • TenActiv™ S13TANT

    Product ID: S13TANT

    These touchscreen compatible TenActiv™ gloves feature a ZedCoat™ palm coating that provides ANSI Level 4 abrasion resistance. They’re made from a lint-free continuous filament yarn that’s stronger than steel and delivers both ANSI Level A4 cut protection and ANSI Level 5 puncture resistance. They’re snug-fitting and ergonomically shaped to ensure comfort, and benefit from an Ultra-Fresh treatment that stops bacterial growth in its tracks.

  • TenActiv™ S13TAGPU

    Product ID: S13TAGPU

    Made from a lint-free continuous filament yarn that’s stronger than steel yet highly flexible, these TenActiv™ gloves provide a high level of cut resistance with outstanding dexterity. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A5 cut protection, and ANSI Level 4 puncture resistance. Polyurethane-coated palms ensure a secure grip and ergonomic shaping increases comfort.

  • TenActiv™ S13TAFNT

    Product ID: S13TAFNT

    These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and benefit from an Ultra-Fresh treatment that prevents bacterial growth.

  • Superior Touch® S13SXPUQ

    Product ID: S13SXPUQ

    These gloves are made from Dyneema®, an extremely strong yet lightweight fabric that’s cool to the touch, making them an excellent choice for work in hot environments. A snug fit, ergonomic shaping and a high level of breathability increase comfort, while a polyurethane palm coating provides outstanding dexterity and a steady grip. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut resistance, and ANSI Level 3 puncture resistance.

  • TenActiv™ S13TAFGPU

    Product ID: S13TAFGPU

    A non-linting 13-gauge continuous filament yarn that’s stronger than steel provides these gloves with ANSI Level A3 cut resistance and ANSI Level 5 puncture resistance. Their polyurethane palm coatings ensure top-notch dexterity and a strong grip. A snug fit with ergonomic shaping provides hands with all-day comfort.

  • Dexterity® S13KGPN

    Product ID: S13KGPN

    A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.

  • Dexterity® S13KFGPU

    Product ID: S13KFGPU

    A flexible, fine gauge knit that offers ANSI Level A4 cut protection makes these non-marring gloves ideal for handling glass. They also feature ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance. Polyurethane-coated palms combine a strong, steady grip with a bare-hand feel. The gloves are ergonomically shaped for a close and comfortable fit.

  • Dexterity® S13KFGFNT

    Product ID: S13KFGFNT

    These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces.

  • Dexterity® S13FRNE

    Product ID: S13FRNE

    An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. An Ultra-Fresh treatment achieves a 99.9% antimicrobial status.

  • Emerald CX® S13CXPNT

    Product ID: S13CXPNT

    Made from a 13-gauge blend of DuPont™ Kevlar® fiber and stainless-steel Wire-Core™, these gloves offer ANSI Level 4 abrasion resistance, 360° ANSI Level A6 cut protection, and ANSI Level A3 puncture resistance. A micropore nitrile palm coating keeps hands dry by resisting oils and liquids, while craters function like tiny suction cups to offer a strong, steady grip on wet or oily surfaces.

  • Chemstop™ NE240TKL

    Product ID: 240TKL

    These heavy-duty neoprene gloves protect against a wide range of oils and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot-water contact up to 100°C / 212°F for 17.25 seconds and feature ANSI Level 3 heat resistance. Terry lining provides further protection from thermal contact and diamond-grip finish palms ensure a strong grip.

  • Contender™ TRFGK

    Product ID: TRFGK

    Intended for use in metal stamping, these gloves are made from a terry knit fabric with a composite filament fiber that provides 360° ANSI Level A5 cut protection and ANSI Level 5 heat resistance. The longer length of its knit-wrist cuffs increases comfort, and cotton interwoven into the fabric blend absorbs grease and oil for a strong grip.

  • Emerald CX® SWTACSL

    Product ID: SWTACSL

    Made from a tough blend of TenActiv™, steel and composite filament fiber, these durable gloves offer 360° ANSI Level A6 cut protection. They also feature an inner cotton liner that keeps hands dry and comfortable and have been treated with Size-Lock™ to prevent shrinkage even with regular washing.

  • TenActiv™ STAGXPU

    Product ID: STAGXPU

    Knit from a blend of steel, HPPE and composite filament fiber, these gloves feature ANSI Level A5 cut protection. A touch of spandex provides comfort and a true fit, while a polyurethane palm coating gives them a close, bare hand feel that’s ideal for sensitive jobs.

  • TenActiv™ STAGPN

    Product ID: STAGPN

    These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A4 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance.

  • TenActiv™ STAGCXPU

    Product ID: STAGCXPU

    A blend of high-performance fibers including aramid, steel, composite filament fiber and TenActiv™ yarn provides these 13-gauge gloves with the highest level of cut protection—ANSI Level A9. A polyurethane coating at the palms increases touch sensitivity, and hands enjoy a high level of dexterity. Their green color hides dirt, and they’re fully launderable for an easy refresh and product longevity.

  • TenActiv™ STAFGPU

    Product ID: STAFGPU

    These gloves feature a soft polyurethane palm coating that provides excellent grip and a high level of comfort. Their TenActiv™ yarn ensures ANSI Level A5 cut protection, and a 13-gauge knit delivers ANSI Level 4 abrasion resistance without sacrificing dexterity. Well-suited to a wide variety of tasks, from rubber and plastics manufacturing to general warehouse use.

  • TenActiv™ STAFGFNT

    Product ID: STAFGFNT

    A breathable TenActiv™ yarn provides these 13-gauge knit gloves with ANSI Level A4 cut protection, and a black foam nitrile palm coating offers a sponge-like grip in wet and oily conditions. They feature ANSI Level 4 abrasion resistance and a high level of dexterity, while their coloration helps to hide dirt between launderings. Excellent for handling oily machine parts.

  • TenActiv™ STACXPURT

    Product ID: STACXPURT

    These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.

  • TenActiv™ STACXPNRT

    Product ID: STACXPNRT

    These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 4 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.

  • Superior Touch® SSXPU3OF

    Product ID: SSXPU3OF

    An open-finger design makes these gloves ideal for tasks that require a bare-hand feel, while a Dyneema® knit provides ANSI Level A2 cut protection. A polyurethane coating at the palm enhances their tactile quality while improving grip. The combination of a snug fit and stretchy material delivers a high level of comfort and dexterity.

  • Contender™ SPGRK4

    Product ID: SPGRK4

    These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures that cut and abrasion resistance apply to the entire surface area, and a latex-free composite prevents allergic reactions.

  • Cool Grip® SPGRK/A

    Product ID: SPGRK/A

    Designed for handling moderately hot parts during rubber and plastic manufacturing, these gloves are made from a unique blend of yarns that provides 360° ANSI Level A6 cut protection and ANSI Level 4 heat resistance. A glove-within-a-glove design traps air in to increase insulation. Its knit construction provides a high level of comfort and dexterity.

  • Contender™ SPGC2D

    Product ID: SPGC2D

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.

  • Contender™ SPGC

    Product ID: SPGC

    Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.

  • Cool Grip® SPFGSS

    Product ID: SPFGSS

    These gloves are made from a polyester and composite fiber blend that provides ANSI Level A5 heat resistance without sacrificing dexterity. Strategically placed silicone strips at the palms increase their lifespan, while an ergonomic shape conforms to the hands’ natural contours, ensuring a high level of comfort.

  • Superior® SNF

    Product ID: SNF

    A highly durable polyester knit gives these versatile gloves an excellent level of dexterity and a comfortable fit, while their insulating properties mean they can keep hands warm even when wet. These gloves can be worn alone, or as a glove liner for any work that requires extra insulation in wet conditions. They’re fully launderable, allowing for fast and easy refresh.

  • Cool Grip® SKX-W4

    Product ID: SKX-W4

    These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A5 cut protection and ANSI Level 5 heat resistance. They feature 4″ gauntlet cuffs for enhanced forearm protection. Their 100% knit terry liner traps air in to provide further protection from thermal contact. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.

  • Contender™ SKGCXPS

    Product ID: SKGCXPS

    There’s a reason we’ve nicknamed these cut-resistant gloves “The Beast.” They’re made from a proprietary blend that includes two of the strongest fibers in existence — DuPont™ Kevlar® fiber and ultra-high molecular weight Polyethylene—which together provide 360° ANSI Level A7 cut protection. A touch of spandex adds comfort and flexibility, and a Size-Lock™ treatment prevents shrinkage even with regular laundering. Reinforced thumb crotches extend their lifespan, ensuring that you get a great return on your investment.

  • Dexterity® SKFGFNLTC

    Product ID: SKFGFNLTC

    These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.

  • Dexterity® SKFG2DFT

    Product ID: SKFG2DFT

    These ambidextrous gloves are made from a fine-gauge knit that provides a superior level of dexterity and flexibility. They feature a DuPont™ Kevlar® fiber that provides 360° ANSI Level A4 cut protection without adding bulk, and benefit from a micropore grip nitrile coating on the fingertips that greatly enhances the grip.

  • Emerald CX® SCXTAPVC

    Product ID: SCXTAPVC

    A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / -23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.

  • TenActiv™ S18TAFG

    Product ID: S18TAFG

    These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel yet conforms to the hand for an unparalleled level of dexterity. Wear them alone for work that requires a highly tactile touch and 360° ANSI Level A4 cut protection or utilize them as liners worn under another pair of gloves for added cut resistance.

  • Sure Knit™ S13SXB

    Product ID: S13SXB

    360° ANSI Level A7 cut protection provides these food-handling gloves with a high level of cut resistance. They’re full launderable for easy refresh and have been treated with Size-Lock™ to prevent shrinkage. An Ultra-Fresh treatment keeps them safe from bacterial growth, and latex-free construction makes them allergen-friendly, too.

  • Dexterity® S13KF

    Product ID: S13KF

    These lightweight string knit gloves are made from a fine-gauge, composite filament fiber wrapped with para-aramid fibers for 360° ANSI Level A4 cut protection and ANSI Level 3 abrasion resistance. Cut resistance combined with a close, ergonomic shape means they can be easily worn as liners under other gloves for extra protection.

  • Superior Touch® S13DY

    Product ID: S13DY

    These fine, 13-gauge knit gloves feature elasticized cuffs for a close, comfortable fit and high levels of flexibility and dexterity. They can be worn on their own as inspector gloves or used as liners for extra cut-resistance. Their HPPE glove body provides ANSI Level 3 abrasion resistance and 360° ANSI Level A2 cut protection.

  • Sure Knit™ S10SXB

    Product ID: S10SXB

    These durable gloves offer 360° ANSI Level A8 cut protection, making them an optimal choice for any food-handling tasks that involve blades. They’ve been treated with Ultra-Fresh to achieve a 99.9% antimicrobial status, and a shrink-preventing Size-Lock™ treatment makes them fully launderable for easy cleaning. The gloves are also touchscreen compatible and free of latex to prevent allergic reactions. These gloves are also available in a similar version with a 6-inch long cuff (#S10SXB6).

  • Emerald CX® S10NXFN

    Product ID: S10NXFN

    A blend of stainless steel and composite filament fibers provides ANSI Level 5 puncture resistance and ANSI Level 4 abrasion resistance. These 10-gauge, cut-resistant gloves are optimized for mining, metalwork, manufacturing, waste management and more. They feature nitrile palms for a superior grip and flexibility and have been treated with Ultra-Fresh for a 99.9% antimicrobial status. They’re also touch screen compatible, and latex free to prevent allergic reactions.

  • Clutch Gear® MXHVPB

    Product ID: MXHVPB

    Palms lined with Punkban™ combined with a material woven with DuPont™ Kevlar® fiber provide these mechanic gloves with ANSI Level 4 puncture resistance. They also include ANSI Level A3 cut protection. Hi-viz lime-green backs provide enhanced visibility, and PVC Sure Grip® palm patches reduce the risk of slippage. Their elasticized cuffs guarantee a secure, comfortable fit, and soft fabric patches on the thumbs wipe away sweat.

  • Clutch Gear® MXHV2PB

    Product ID: MXHV2PB

    Full Punkban™ lining at the front and the back of the glove combined with a material woven with DuPont™ Kevlar® fiber provides ANSI Level 5 puncture resistance. These gloves also include ANSI Level A5 cut protection, making them an excellent choice for handling hypodermic needles. Their hi-viz lime green backs improve visibility, and adjustable Velcro tabs at the back of the wrist allow for a snug, secure fit. PVC Sure Grip® palm patches ensure that nothing will slip through the fingers.

  • Clutch Gear® MXGKGHVB

    Product ID: MXGKGHVB

    Built from tough goatskin, these gloves feature impact resistant back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level A5 cut protection. They’re made with wide elastic straps for a comfortable, adjustable fit, and benefit from flexible foam-laminated spandex backs that improve dexterity. Leather-wrapped fingertips boost their durability, while a hi-viz backing increases worker visibility.

  • Endura® 304KGTL

    Product ID: 304KGTL

    No hand-warming feature has been overlooked in the creation of these tough, cut-resistant goatskin mitts. Lined with DuPont™ Kevlar® fiber for 360° ANSI Level A4 cut protection and G200 Thinsulate™ for exceptional warmth, these slip-on mitts are cold-rated down to temperatures of -30°C / -22°F . Elasticized wrists and faux fur cuffs capture warmth and block out cold, while a pair of plastic clips ensure they won’t be separated in storage.

  • TenActiv™ STAGPNVPI

    Product ID: STAGPNVPI

    The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A4 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.

  • TenActiv™ STAGHVPU

    Product ID: STAGHVPU

    A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.

  • Dexterity® SNTAPVCFB

    Product ID: SNTAPVCFB

    All-over PVC coating prevents these water-repellant gloves from stiffening in wet and freezing conditions, making them an excellent choice for any job involving contact with snow. Their soft fleece lining ensures hands stay warm in temperatures down to -5°C / 23°F, and their light weight and quick-drying properties provide maximum comfort.

  • Dexterity® SNTAPVC

    Product ID: SNTAPVC

    These lightweight, water-repellant gloves feature a soft fleece lining that keeps hands warm in temperatures down to -5°C / 23°F. A micropore PVC coating provides a high level of flexibility even in sub-zero temperatures, and a palm coating ensures a strong, steady grip. Quick-drying capabilities make them even more versatile.

  • Dexterity® SKG/PXNE

    Product ID: SKG/PXNE

    The combination of DuPont™ Kevlar® fiber and Protex® yarns provides these gloves with 360° ANSI Level A5 cut resistance and ANSI Level 4 heat resistance. Their lining ensures that hands stay warm in temperatures down to -5°C / 23°F, and a flame-resistant neoprene palm coating provides a strong, steady grip in wet or dry conditions. They’re capable of offering protection from heat in temperatures up to 260°C / 500°F and feature a level 3 Arc Flash rating.

  • Contender™ SBKG

    Product ID: SBKG

    Knit from DuPont™ Kevlar® fiber and capable of passing a 10-second flame test, these heat and spark resistant gloves are ideal for use in metal stamping and commercial equipment manufacturing. They offer 360° ANSI Level A5 cut protection and ANSI Level 3 abrasion resistance while remaining highly comfortable and dexterous, thanks to their seamless string knit construction.

  • Clutch Gear® MXGKGHV

    Product ID: MXGKGHV

    Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable and personalized ID labels prevent loss.

  • Clutch Gear® MXGKGHTVB

    Product ID: MXGKGHTVB

    Thinsulate™ lining that warms hands in temperatures down to -15°C / 5°F optimizes these high-visibility goatskin gloves for work in icy winter conditions. They’re made from a tough, abrasion-resisting goatskin and feature extra back-of-hand protection to defend against knocks and bumps. Hook and loop closure tabs ensure a secure but comfortable fit and leather wrapping at the fingertips increases their lifespan.

  • Superior® ML80

    Product ID: ML80

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They’re designed to be hand-to-hand reversible for greater ease of use and will form to the hand for a closer fit.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their DuPont™ Kevlar® fiber lining delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with Kevlar® fiber for added seam integrity.

  • Endura® 399GKGTL5

    Product ID: 399GKGTL5

    Abrasion resistant goatskin leather and durable wing thumbs optimize these driver gloves for the long haul, while 6″ gauntlet cuffs provide extra protection. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. A Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 14°F.

  • Endura® 399GKGL5

    Product ID: 399GKGL5

    Abrasion resistant goatskin leather and durable wing thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with DuPont™ Kevlar® fiber and composite filament fiber provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. Testing places these gloves at an arc flash level 4 rating, and ANSI level 2 heat rating with protection up to 140°C / 284°F.

  • Endura® 378KMT4P

    Product ID: 378KMT4P

    These tough goatskin driver gloves are the first line of defense when impact injuries pose a potential risk. Their 4PRO™ back-of-hand protection offers an ANSI Level 3 impact rating that doesn’t compromise mobility, even in freezing cold conditions. A DuPont™ Kevlar® fiber / composite filament fiber lining offers 360° ANSI Level A5 cut protection, and an Arc Flash testing grade of 3 ensures that stray sparks won’t pose a threat.

  • Endura® 378KGTVB

    Product ID: 378KGTVB

    These tough goatskin gloves include reinforced back-of-hand protection to guard against impact while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. A padded palm increases durability while suppressing vibrations, and Thinsulate™ lining ensures warmth in temperatures down to -20°C / -5°F.

  • Endura® 378GOBBFC

    Product ID: 378GOBBFC

    These tough goatskin driver gloves feature crush-proof finger caps designed to protect from impact hazards, cuts, and punctures. An Oilbloc™ treatment that resists oil and water ensures maximum grip, and a padded palm dampens vibrations. Extra protection at the back-of-the hand guards against further impacts.

  • Endura® 378GKGVBG

    Product ID: 378GKGVBG

    These tough goatskin driver gloves feature a DuPont™ Kevlar® fiber / composite filament lining that offers 360° ANSI Level A6 cut protection and Level 4 puncture protection. Reinforced materials at the back of the hand ensure a strong grip without inhibiting freedom of movement. Padding at the palm dulls vibrations to further enhance grip, while an extended gauntlet cuff keeps wrists safe.

  • Endura® 375KGVB

    Product ID: 375KGVB

    The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360° ANSI Level A5 cut protection and ANSI Level 4 puncture protection. An Oilbloc™ treatment assures the highest level of oil and water resistance, and reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.

  • Endura® 375GKGVB

    Product ID: 375GKGVB

    The DuPont™ Kevlar® fiber lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.

  • Endura® 375KGTVB

    Product ID: 375KGTVB

    The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360°ANSI Level A5 cut protection and ANSI Level 4 puncture protection. Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 15°F and an Oilbloc™ treatment assures the highest level of oil and water resistance. Reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.

  • Endura® 370GFKL

    Product ID: 370GFKL

    These MIG welder gloves are built with tough goatskin leather on the outside and a fine-gauge DuPont™ Kevlar® interlock knit lining inside to allow for 360° cut protection and durability that minimizes interference with touch sensitivity. Their lining made with DuPont™ Kevlar® fiber offers heat and spark resistance in addition to cut protection. And their wide gauntlet cuffs are gusseted, making it easier to put them on and take them off.

  • Endura® 365DLX2

    Product ID: 365DLX2

    2″ cuffs marked by retro-reflective silver strips provide these heavyweight horsehide leather lineman gloves with visibility that you can count on. Sewing thread is made with Kevlar® fiber for added seam integrity. A performance patch at the thumb and palm make them hard-wearing. A high level of resistance to water, oil and stains increases their utility even further.

  • Endura® 76YBDQ

    Product ID: 76YBDQ

    These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.

  • TenActiv™ STAGYPNVB

    Product ID: STAGYPNVB

    These 13-gauge TenActiv™ gloves offer ANSI Level A5 cut protection which is matched with impact-resistant back of hand protection and a hi-viz knit shell. Their micropore nitrile coating displaces oil which guarantees a steady grip on slick or slippery surfaces, making them an excellent choice in heavy construction and oil & gas industries.

  • TenActiv™ STAFGFNVB

    Product ID: STAFGFNVB

    These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.

  • TenActiv™ STACXPNRVB

    Product ID: STACXPNRVB

    Featuring both a TenActiv™-blended yarn for ANSI Level A7 cut protection and impact-resistant back-of-hand protection, these composite-knit gloves are built to perform in any environment that presents cut and impact hazards. A micropore nitrile coating at the palm assures a steady grip even in wet or oily conditions, and patches of hi-viz color increase visibility.

  • Emerald CX® SKWCPLP

    Product ID: SKWCPLP

    A strong grip meets high cut resistance in the form of these string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester that provides 360° ANSI Level A5 cut protection. Their leather palms increase comfort and durability, while providing a strong, steady grip on lightly oiled metal which makes these gloves ideal for handling heavy metal parts as well as glass or sharp objects.

  • Cool Grip® SKPX/PSS

    Product ID: SKPX/PSS

    Made from a blend of DuPont™ Kevlar® fiber and Protex® yarns that provide 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance, these 7-gauge double-layer gloves are a perfect match for any job that presents cut hazards in high heat. Silicone strips at the palm increase their grip and heat resistance, and inner gloves made from high-bulk polyester give them a soft, comfortable fit.

  • TenActiv™ SHVPNFBVB

    Product ID: SHVPNFBVB

    These hi-viz gloves are a perfect match for jobs that require protection from impact hazards and liquids. They’re built from a tough TenActiv™ yarn for 360°ANSI Level A5 cut protection, and feature impact-resistant back-of-hand protection without sacrificing dexterity. A nitrile coating that covers ¾ of the back of the glove ensures a steady grip on slippery surfaces, and double-stitched PVC patches at the thumbcrotch and index finger extend their lifespan.

  • Cool Grip® SCPSCLP

    Product ID: SCPSCLP

    The combination of SilaChlor® insulation that offers heat resistance in temperatures up to 315°C (600°F) and tough leather palms that wrap around finger sides makes these heat-resistant gloves perfectly suited to work in metal production, rubber and plastics manufacturing, and more. They offer 360°ANSI Level A3 cut resistance, ANSI Level 4 puncture resistance, and ANSI Level 5 heat resistance.

  • TenActiv™ SBTAKLP

    Product ID: SBTAKLP

    A thin line construction provides these 10-gauge cut-resistant gloves with a high level of dexterity. Their steel reinforced TenActiv™ yarn provides 360° ANSI Level A8 cut protection, while premium side split leather palms increase their abrasion resistance. Sewing thread is made with Kevlar® fiber for added seam integrity. Leather reinforcement at the thumb crotch greatly increases the gloves’ lifespan.

  • Chemstop™ S15KGVNVB

    Product ID: S15KGVNVB

    Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A4 cut protection, these gloves guard against a wide variety of risks. Their nitrile coating provides a secure grip on even wet and slippery surfaces, gauntlet cuffs increase wrist safety and green hi-viz backs offer enhanced visibility.

  • Chemstop™ S15KGVNFVB

    Product ID: S15KGVNFVB

    Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A6 cut protection, these fleece-lined winter gloves guard against a wide variety of risks. Their fleece lining ensures that hands stay warm in temperatures down to -5°C (23°F), and a nitrile coating provides a secure grip on even wet and slippery surfaces. Gauntlet cuffs increase wrist safety and hi-viz backs offer enhanced visibility.

  • Dexterity® S15GPNVB

    Product ID: S15GPNVB

    These gloves match ANSI Level A4 cut protection with impact-resistant back of hand protection that delivers ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.

  • Emerald CX® S13KBGLP

    Product ID: S13KBGLP

    Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.

  • Endura® 398KGLBG

    Product ID: 398KGLBG

    These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 4 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 3 puncture resistance.

  • Endura® 378GOBTKL

    Product ID: 378GOBTKL

    These goatskin gloves benefit from a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level 4 cut protection and ANSI Level 4 puncture protection. Their Oilbloc™ treatment delivers outstanding water and oil resistance, and a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F. An Arc Thermal Performance Value (ATPV) of 52 cal/cm² defends from stray sparks and flames.

  • Endura® 378GOBKL

    Product ID: 378GOBKL

    These tough goatskin gloves feature an elasticized back and a slip-on fit that provides maximum comfort and ease of use. Abrasion resistant goatskin and an oil and water-resisting Oilbloc™ treatment extend product longevity. A DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.

  • Endura® 378GKGTL

    Product ID: 378GKGTL

    A cut-and-sewn construction provides these winter driving gloves with a high degree of comfort and dexterity. The resilience of goatskin and durability of a keystone thumb design ensures product longevity while a DuPont™ Kevlar® fiber / composite filament fiber liner guarantees 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. Their warming but lightweight Thinsulate™ lining keeps fingers warm in temperatures down to -30°C / -22°F.

  • Endura® 378GKTKL

    Product ID: 378GKTKL

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A3 cut protection and ANSI Level 4 puncture resistance.

  • Endura® 378GKTFG

    Product ID: 378GKTFG

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.

  • Endura® 378GKGVBE

    Product ID: 378GKGVBE

    These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A6 cut protection. They defend the hand from impact injuries, while a padded palm increases durability and suppresses vibrations.

  • Endura® 378GKGTVBE

    Product ID: 378GKGTVBE

    These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™ for winter protection in temperatures down to -25°C / 13°F Their DuPont™ Kevlar® fiber and composite filament fiber lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.

  • Endura® 378GKGE

    Product ID: 378GKGE

    These soft goatskin driving gloves provide a lightweight, tailored fit thanks to their cut-and-sewn construction, while including key cut and spark-resistant features. They’re fully lined with a DuPont™ Kevlar® fiber / composite filament fiber that provides 360° ANSI Level A4 cut resistance and ANSI Level 4 puncture resistance. They also feature an Arc Flash testing level of 3 for protection from sparks and flame.

  • Endura® 378CXGOB

    Product ID: 378CXGOB

    These ultra-abrasion-resistant goatskin gloves are your first line of defense against punctures and cuts. Lining made from a blend of para-aramid and wire-core provides 360° ANSI Level A9 cut protection. They also provide ANSI Level 5 protection from punctures. Its Oilbloc™ treatment resists oil and water to prevent slips when safety matters most.

  • Endura® 365DLX2KG

    Product ID: 365DLX2KG

    These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.

  • Endura® 361DLXTKG

    Product ID: 361DLXTKG

    These cowgrain leather mitts meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands. They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F . Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection.

  • Endura® 69BSKFFL

    Product ID: 69BSKFFL

    These tough split-leather gloves offer ANSI Level 4 puncture resistance and are lined with a DuPont™ Kevlar® fiber blend for 360° ANSI Level A5 cut protection. They’re a heavy-duty work glove that fuses durable construction with a high level of cut resistance. Sewing thread is made with Kevlar® fiber for added seam integrity. A Gunn-cut pattern prevents seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.

  • Endura® 378GKGVB

    Product ID: 378GKGVB

    These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A5 cut protection while defending against impact injuries. They’ve received an Oilbloc™ treatment which prevents oils and liquids from soaking into the leather, and a padded palm increases durability while suppressing vibrations. A level 3 Arch Flash testing rating ensures protection from sparks and flame.