• Superior Touch® S18ULPFN

    Product ID: S18ULPFN

    Our Superior Touch® S18ULPFN gloves maximize touch and improve grip while protecting the hands from minor common hazards associated with assembly and inspection. The ultra-thin, lightweight shell and our thinnest palm coating offer a high level of dexterity to easily feel, grip, and manipulate small parts like nuts, bolts, clips, and plastic components.

  • TenActiv™ STAWLP

    Product ID: STAWLP

    Ideal for metal stamping applications in warm working conditions, our new STAWLP gloves provide cool dexterity and comfort and long lasting durability. A Protex outer layer offers spark and heat resistance while a TenActiv™ knit shell offers rugged durability. The gloves are also rated for ANSI Level A6 cut resistance and Level 4 puncture resistance for well-rounded protection.

  • TenActiv™ STAGLXPB

    Product ID: STAGLXPB

    Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.

  • TenActiv™ STAGCTPU

    Product ID: STAGCTPU

    When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.

  • TenActiv™ STAGBLPVB

    Product ID: STAGBLPVB

    Featuring exclusive ErgoHyde palms, these gloves provide maximum grip and durability on wet or oily surfaces while taking comfort and dexterity to a new level. Our ErgoHyde palm averages twice the grip of typical leather palms and its exclusive thermoforming technology creates an ergonomic fit for a natural feeling palm that optimizes dexterity. We’ve paired this with a knit glove body to add flexibility and breathability while Oilbloc™ ensures palms repel water and oil. These gloves also feature 360° cut resistance, flexible impact protection, and puncture-resistant palms. ​​

  • Dexterity® S15NAPN

    Product ID: S15NAPN

    The S15NAPN gloves have a new nitrile palm formulation that helps to achieve maximum ANSI abrasion resistance. These gloves offer dexterity and comfort, and are excellent for masonry, material handling, and other tasks that involve a high level of abrasive hazards which wear down other gloves too quickly.

  • Chemstop™ S15KGVNVIB

    Product ID: S15KGVNVIB

    Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.

  • Endura® 378GCXVB

    Product ID: 378GCXVB

    Our new 378GCXVB gloves bring maximum cut resistance to our impact protection offering. The lining is made with DuPont™ Kevlar® fiber which provides 360° ANSI Level A9 cut protection while the flexible back-of-hand plate offers ANSI Level 2 impact protection – all in a highly durable leather shell that resists oil and water. Originally designed for use in oil and gas applications, these versatile gloves are useful for high-hazard applications in mining, forestry, construction, and other industries where cut and impact risks can be high.

  • Endura® 398GDP

    Product ID: 398GDP

    We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.

  • Endura® 378GTXOTL

    Product ID: 378GTXOTL

    For users in warm environment industries, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable and more breathable than other liner materials. They also incorporate our latest in palm-grip technology to improve dexterity, stability, and durability. Thinsulate™ -lined to achieve a winter rating of -30C/-22F, these gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4.

  • Endura® 378GTXOT

    Product ID: 378GTXOT

    For users in cold/winter environments, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable, and more breathable than other liner materials. They also incorporate our latest in palm-grip technology to improve dexterity, stability, and durability. These gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4.

  • Endura® 378GOBKVB

    Product ID: 378GOBKVB

    These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.

  • Dexterity® S13PFNP

    Product ID: S13PFNP

    Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.

  • TenActiv™ STAGFNP

    Product ID: STAGFNP

    A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 4 palm puncture resistance.

  • TenActiv™ S21TAXFN

    Product ID: S21TAXFN

    These touchscreen-compatible, 21-gauge gloves are the closest you can get to a barehand feel while still achieving a high level of cut resistance. Their TenActiv™ wire-core composite filament fiber blend ensures 360° ANSI Level A5 cut protection, while a foam nitrile coating at the palms provides a secure grip on lightly oiled parts. For added protection, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • TenActiv™ S18WTLFN

    Product ID: S18WTLFN

    This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ 18-gauge knit assures ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.

  • TenActiv™ S18TAXFN

    Product ID: S18TAXFN

    These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.

  • TenActiv™ S18TATLFN

    Product ID: S18TATLFN

    These multi-use gloves feature an acrylic terry liner that keeps hands warm in temperatures down to -5°C / 23°F. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance without sacrificing dexterity. A foam nitrile coating at the palms guarantees a sturdy grip while working on oily surfaces.

  • Endura® 398OBPB

    Product ID: 398OBPBLH

    Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 4 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A4 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.

  • Endura® 378GKG4P

    Product ID: 378GKG4P

    This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².

  • Endura® 378GKGVBG

    Product ID: 378GKGVBG

    These tough goatskin driver gloves feature a DuPont™ Kevlar® fiber / composite filament lining that offers 360° ANSI Level A6 cut protection and Level 4 puncture protection. Reinforced materials at the back of the hand ensure a strong grip without inhibiting freedom of movement. Padding at the palm dulls vibrations to further enhance grip, while an extended gauntlet cuff keeps wrists safe.

  • Endura® 375GKGVB

    Product ID: 375GKGVB

    The DuPont™ Kevlar® fiber lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.

  • Dexterity® S15GPNVB

    Product ID: S15GPNVB

    These gloves match ANSI Level A4 cut protection with impact-resistant back of hand protection that delivers ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.

  • Endura® 378GKGTVBE

    Product ID: 378GKGTVBE

    These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™ for winter protection in temperatures down to -25°C / 13°F Their DuPont™ Kevlar® fiber and composite filament fiber lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.

  • Chemstop™ NE3030

    Product ID: NE3030
  • TenActiv™ S18TAFGFNF

    Product ID: S18TAFGFNF
  • Emerald CX® S10NXFNLT

    Product ID: S10NXFNLT
  • Emerald CX® S13CXSI

    Product ID: S13CXSI

    Our Emerald CX® S13CXSI gloves offer 360° cut protection designed to resist the stickiest of adhesives, repel liquids, and protect hands from heat. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating.

  • Dexterity® S13NSI

    Product ID: S13NSI

    Our Dexterity® S13NSI gloves are a durable, high tactility option for resisting the stickiest of adhesives, repelling liquids, and protecting hands from heat. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating.

  • Dexterity® S7NT

    Product ID: S7NT

    These long-lasting, general-purpose gloves are constructed with a 100% cotton seamless knit shell that ensures ANSI Level 3 abrasion resistance and ANSI Level 4 puncture resistance. A high-quality nitrile coating repels oil and moisture, while a dexterous design improves flexibility and comfort. An additive in the nitrile coating makes these gloves 100% biodegradable.

  • Dexterity® SN15NTFB

    Product ID: SN15NTFB

    Optimized for a wide range of tasks and activities, these general-purpose gloves are built from a durable, flexible fine-gauge nylon that delivers ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. An all-over nitrile coating repels oil, fuel, and other solvents, while an ergonomic design provides all day comfort.

  • Emerald CX® SCXLX

    Product ID: SCXLX

    A latex palm coating provides these gloves with an excellent dry grip, while a blend of DuPont™ Kevlar® fiber, Wire-Core™ steel and polyester ensures ANSI Level A5 cut protection. For added safety, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Endura® 378GOBDTK

    Product ID: 378GOBDTK

    Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.

  • Dexterity® S10LXPB

    Product ID: S10LXPB

    Hypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.

  • Chemstop™ NIF3018

    Product ID: NIF3018

    Thanks to a nitrile coating, these 15mil thick gloves resist a wide range of chemicals and solvents including oil, fuel and methanol. Their embossed finish provides a steady grip and flock lining ensures comfort. An extended 12″ length provides a greater zone of coverage and ANSI Level A3 puncture resistance further protects hands.

  • Chemstop™ NI3012

    Product ID: NI3012

    These flexible gloves are made from 12 mil thick nitrile for reliable resistance to chemicals, oil, fuel and organic solvents, and feature a 12″ length for wide-ranging protection. They’re able to safely perform in temperatures ranging from -4°C to 149°C (25°F – 300°F) and have been rated with ANSI Level 2 puncture resistance. An embossed finish guarantees a steady grip.

  • Chemstop™ NE250TRC

    Product ID: NE250TRC

    These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.

  • Clutch Gear® MXVSBPB

    Product ID: MXVSBPB

    Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.

  • Clutch Gear® MXVSB

    Product ID: MXVSB

    These mechanic gloves match a superior level of dexterity with impact-resisting features including back-of-the-hand protection. Their PVC Sure Grip® palm patches provide a strong, steady grip while affording extra protection to the fingertips, and DuPont™ Kevlar® fiber thumb patches reinforce a high-stress area to further enhance durability. Velcro cuffs ensure a comfortable and adjustable fit.

  • Clutch Gear® MXGKGHVTL

    Product ID: MXGKGHVTL

    Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, and a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable, and C100 Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F.

  • Endura® 378GKGDT

    Product ID: 378GKGDT

    These versatile goat and grain gloves benefit from ultra-warming C200 Thinsulate™ lining, which provides a double layer of insulation to guarantee warmth down to temperatures of -20°C / -4°F. At the same time, a keystone thumb ensures comfort and durability, and DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 5 puncture resistance.

  • Endura® 378GHVTL

    Product ID: 378GHVTL

    These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -15°C / 5°F . Elasticized backs make sure that the fit secure.

  • Endura® 378GAX

    Product ID: 378GAX

    Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.

  • Action™ SKLP

    Product ID: SKLP

    These string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester, provide 360° ANSI Level A5 cut protection and flame resistance. Their leather palms increase comfort and durability, while providing a strong, steady grip which makes these gloves an ideal choice when handling heavy metal parts and glass or sharp objects.

  • Dexterity® SKGPNVB

    Product ID: SKGPNVB

    These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.

  • Dexterity® SKFGFNVB

    Product ID: SKFGFNVB

    These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.

  • Superior Touch® S13SXGPU

    Product ID: S13SXGPU

    These CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.

  • Vibrastop™ VIBGV

    Product ID: VIBGV

    Featuring 60 grams of vibration dampening polymer at the palms and a high level of dexterity, these gloves are an excellent choice when working with pneumatic tools and repetitive impact machinery. An adjustable, padded 2.5″ wrist strap offers further abrasion resistance and wrist protection.

  • TenActiv™ STAGHVPN

    Product ID: STAGHVPN

    A stronger-than-steel TenActiv™ yarn gives these gloves ANSI Level A5 cut protection, and a hi-viz knit shell increases their visibility. A micropore nitrile coating ensures an excellent grip even on wet and oily surfaces, and a reinforced thumb crotch extends their lifespan by reducing wear in high-stress areas. They’re made touchscreen compatible so you never need to remove your gloves as you move between tasks.

  • Endura® 365DLXTKG

    Product ID: 365DLXTKG

    These heavyweight cowgrain leather gloves benefit from DuPont™ Kevlar® fiber for 360° cut protection that meets ANSI Level A4 . The 6″ gauntlet cuffs feature two 3M™ retroreflective silver strips enhanced by high-viz bands, meeting the ANSI/ISEA 107-2015 standard for high visibility. They provide an excellent level of water, oil and stain resistance, and feature split-leather at the cuffs. They are also Thinsulate™-lined for winter protection in temperatures down to -15°C / 5°F.

  • Endura® 361DLXWL

    Product ID: 361DLXWL

    These heavy-duty mitts built from specially selected horsehide leather are wool lined for warmth in temperatures down to -45°C / -50°F. Their gauntlet cuffs are marked by retroreflective silver strips and a hi-viz overlay to assure maximum visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. A leather performance patch at the palm makes them extra-hard wearing, and a removable, washable lining makes it easy to keep them fresh and clean.

  • TenActiv™ KPSTA18TH

    Product ID: KPSTA18TH

    These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A8 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.

  • Contender™ KGC1T

    Product ID: KGC1T

    A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 2 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.

  • Dexterity® TKTAGLX

    Product ID: TKTAGLX

    These cut resistant, insulated gloves are optimized for mild-winter work. Constructed from a blend of terry and high-performance polyethylene that ensures ANSI Level A3 cut protection and ANSI Level 4 puncture resistance, their napped lining keeps hands warm in temperatures down to -15°C / 23°F without adding bulk. An orange backing improves visibility.

  • TenActiv™ S18WTFN

    Product ID: S18WTFN

    These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ 18-gauge knit provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 4 puncture resistance.

  • TenActiv™ S13TAXFN

    Product ID: S13TAXFN

    Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.

  • Endura® 378KGVB

    Product ID: 378KGVB

    These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A5 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.

  • Endura® 378GOBFC

    Product ID: 378GOBFC

    Pinch-point hazards have met their match in these tough leather gloves equipped with crush-resistant finger caps that safeguard fingertips from crush, impact, cut, and puncture hazards while still allowing flexibility and movement needed for everyday work. Additional comfort is provided with a keystone thumb design and full cotton liner. Oilbloc™ treatment repels water and oil.

  • TenActiv™ STAGBPU

    Product ID: STAGBPU

    These gloves are knit from a non-linting continuous filament yarn that’s stronger than steel and provides ANSI Level A4 cut protection. Their palms are coated with polyurethane that increases grip and adds a bare-hand feel. Thanks to a black coloration that hides dirt, you won’t have to wash them between every job.

  • Chemstop™ SH230

    Product ID: SH230

    These chemically resistant gloves are made from a heavyweight PVC that resists a wide range of chemicals and stays soft even at lower temperatures. They feature ergonomic shaping for greater comfort and reduced hand fatigue, and they are CFIA-compliant, making them ideal for tasks like food processing and commercial fishing.

  • Emerald CX® SCXPNTFC

    Product ID: SCXPNTFC

    These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.

  • TenActiv™ S18TAGOFN

    Product ID: S18TAGOFN

    A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.

  • TenActiv™ S18TAGGFN

    Product ID: S18TAGGFN

    A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice for working with sensitive electronics.

  • TenActiv™ S18TAFGPU

    Product ID: S18TAFGPU

    These 18-gauge knit gloves feature a polyurethane coating that enhances dexterity and a bare-hand feel while also providing a strong and comfortable grip. Their naturally cool TenActiv™ yarn prevents hands from overheating while offering ANSI Level A4 cut protection. These gloves are an outstanding choice for jobs that require working with small parts where a strong grip is required.

  • TenActiv™ S18TAFGNT

    Product ID: S18TAFGNT

    These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.

  • TenActiv™ S18TAFGFN

    Product ID: S18TAFGFN

    These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. An Ultra-Fresh treatment blocks bacterial growth, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.

  • Dexterity® S18KGFN

    Product ID: S18KGFN

    ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with Ultra-Fresh to prevent bacterial growth. They’re also touchscreen compatible for added convenience.

  • TenActiv™ S15TAFGPU

    Product ID: S15TAFGPU

    A high level of dexterity and ANSI Level A2 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.

  • Dexterity® S15NT

    Product ID: S15NT

    These versatile gloves are proudly made in Canada from a 100% cotton seamless knit shell that provides outstanding dexterity and comfort. A nitrile-dipped palm coating, which over time, forms to fit the user’s hand, offers ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. An additive in the nitrile coating makes these gloves 100% biodegradable.

  • Chemstop™ S15KGV30N

    Product ID: S15KGV30N

    When a job presents the risk of cuts and chemical exposure, these Chemstop™ gloves should be your first line of defense. They’re fully aramid lined for ANSI Level A4 cut protection and feature a red PVC base coating that guards against chemicals and solvents. Gauntlet cuffs provide additional protection to the forearms, and a black nitrile coating that resists oil ensures a steady grip even on slick surfaces. They’re ergonomically shaped for high levels of comfort and dexterity.

  • Superior Touch® S13WPPU

    Product ID: S13WPPU

    These gloves are made from a non-linting, highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A polyurethane coating improves grip, while ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance provides added protection. A snug fit ensures lasting comfort and dexterity, and their white coloring makes dust and dirt visible.

  • TenActiv™ S13TAWFN

    Product ID: S13TAWFN

    Rated ANSI Level A9 cut resistant, these TenActiv™ gloves are made from a 13-gauge construction that provides an extreme level of protection without sacrificing dexterity. A foam nitrile coating at the palms ensures a solid grip on lightly oiled parts. They’re designed to be fully launderable, allowing for a fast and convenient refresh, and an extended product life.

  • TenActiv™ S13TAPUCF

    Product ID: S13TAPUCF

    Perfect for electronics manufacturing, these gloves are made from a 13-gauge TenActiv™-blended yarn that provides ANSI Level A2 cut protection, and also benefits from anti-static carbon filament. It’s polyurethane palm coating ensures a steady grip, and its touchscreen compatible design adds convenience.

  • TenActiv™ S13TANT

    Product ID: S13TANT

    These touchscreen compatible TenActiv™ gloves feature a ZedCoat™ palm coating that provides ANSI Level 4 abrasion resistance. They’re made from a lint-free continuous filament yarn that’s stronger than steel and delivers both ANSI Level A4 cut protection and ANSI Level 5 puncture resistance. They’re snug-fitting and ergonomically shaped to ensure comfort, and benefit from an Ultra-Fresh treatment that stops bacterial growth in its tracks.

  • TenActiv™ S13TAGPU

    Product ID: S13TAGPU

    Made from a lint-free continuous filament yarn that’s stronger than steel yet highly flexible, these TenActiv™ gloves provide a high level of cut resistance with outstanding dexterity. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A5 cut protection, and ANSI Level 4 puncture resistance. Polyurethane-coated palms ensure a secure grip and ergonomic shaping increases comfort.

  • TenActiv™ S13TAFNT

    Product ID: S13TAFNT

    These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and benefit from an Ultra-Fresh treatment that prevents bacterial growth.

  • Superior Touch® S13SXPUQ

    Product ID: S13SXPUQ

    These gloves are made from Dyneema®, an extremely strong yet lightweight fabric that’s cool to the touch, making them an excellent choice for work in hot environments. A snug fit, ergonomic shaping and a high level of breathability increase comfort, while a polyurethane palm coating provides outstanding dexterity and a steady grip. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut resistance, and ANSI Level 3 puncture resistance.

  • TenActiv™ S13TAFGPU

    Product ID: S13TAFGPU

    A non-linting 13-gauge continuous filament yarn that’s stronger than steel provides these gloves with ANSI Level A3 cut resistance and ANSI Level 5 puncture resistance. Their polyurethane palm coatings ensure top-notch dexterity and a strong grip. A snug fit with ergonomic shaping provides hands with all-day comfort.

  • Superior Touch® S13PUCF

    Product ID: S13PUCF

    These Superior Touch® gloves benefit from a carbon filament that grounds energy and prevents static charges from building, making them an ideal choice for working with electronics. Their continuous-filament nylon knit also provides outstanding touch sensitivity and durability, and a polyurethane palm coating provides a strong grip. They’re lint-free and non-marring, suiting them to work with glass and other delicate materials.

  • Superior Touch® S13PU

    Product ID: S13PU

    A fine-gauge nylon material and a snug, comfortable fit give these gloves a bare-hand feel with outstanding dexterity. A polyurethane palm coating increases grip, and their non-linting and non-marring qualities make them ideal for handling sensitive materials and glass.

  • Dexterity® S13PNT

    Product ID: S13PNT

    A micropore nitrile coating that displaces oil on slick surfaces provides these 13-gauge nylon gloves with excellent grip, making them a great choice for handling small parts in oily conditions. The coating also resists oils and liquids to keep hands dry, and the gloves are fully launderable for easy cleaning and refresh.

  • Dexterity® S13KGPN

    Product ID: S13KGPN

    A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.

  • Dexterity® S13KFGFNT

    Product ID: S13KFGFNT

    These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces.

  • Dexterity® S13HVLX

    Product ID: S13HVLX

    Foam latex palms with a dual layer microfinish grip provide these versatile gloves with an outstanding grip on wet surfaces. They’re made from a lightweight and breathable polyester knit that wicks away moisture to keep hands dry and feature ergonomic shaping for enhanced comfort. ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance further protects hands, while high-viz lime green coloring improves visibility.

  • Superior Touch® S13GPU

    Product ID: S13GPU

    These gloves are made from a non-linting, non-marring and highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A soft polyurethane coating improves grip, while offering ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. A snug fit ensures lasting comfort and dexterity.

  • Superior Touch® S13GPPU

    Product ID: S13GPPU

    These gloves are made from a non-linting, non-marring and highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A polyurethane coating improves grip, while offering ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. A snug fit ensures lasting comfort and dexterity.

  • Dexterity® S13FRNE

    Product ID: S13FRNE

    An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. An Ultra-Fresh treatment achieves a 99.9% antimicrobial status.

  • Dexterity® S13FNT

    Product ID: S13FNT

    These nylon work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.

  • Emerald CX® S13CXPNT

    Product ID: S13CXPNT

    Made from a 13-gauge blend of DuPont™ Kevlar® fiber and stainless-steel Wire-Core™, these gloves offer ANSI Level 4 abrasion resistance, 360° ANSI Level A6 cut protection, and ANSI Level A3 puncture resistance. A micropore nitrile palm coating keeps hands dry by resisting oils and liquids, while craters function like tiny suction cups to offer a strong, steady grip on wet or oily surfaces.

  • Chemstop™ NT230

    Product ID: NT230

    Meeting the needs of industries such as petrochemical or automotive, these gloves feature a crushed ceramic-powder grip finish which provides fantastic grip in oily/wet conditions. They resist oils, greases, and organic solvents, all while furnishing excellent puncture, snag, abrasion resistance.

  • Chemstop™ NE246FFL

    Product ID: 246FFL

    These heavy-duty neoprene gloves come in an extra-long 18″ length to provide a superior level of protection against oils, chemicals, acids and caustics. A cotton shell improves comfort while absorbing sweat, and their thermal lining provides ANSI Level 3 heat resistance. They can be easily sanitized by washing and rinsing in the sink.

  • Chemstop™ NE240TKL

    Product ID: 240TKL

    These heavy-duty neoprene gloves protect against a wide range of oils and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot-water contact up to 100°C / 212°F for 17.25 seconds and feature ANSI Level 3 heat resistance. Terry lining provides further protection from thermal contact and diamond-grip finish palms ensure a strong grip.

  • North Sea™ N230FLK

    Product ID: N230FLK

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level A4 abrasion resistance and ANSI Level A3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.

  • North Sea™ N230FL

    Product ID: N230FL

    These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level A4 abrasion resistance and ANSI Level A3 puncture resistance, along with sand-patch grip panels that provide a secure drip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.

  • North Sea™ N230CR

    Product ID: N230CR

    Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.

  • Chemstop™ L8230

    Product ID: L8230

    These highly dexterous latex gloves are constructed with a rough finish on the hands that greatly increases their grip in wet and dry conditions. An inner cotton-jersey lining increases comfort by absorbing sweat and reducing heat transfer, while ANSI Level 2 puncture protection further enhances hand safety.

  • TenActiv™ STAGXPU

    Product ID: STAGXPU

    Knit from a blend of steel, HPPE and composite filament fiber, these gloves feature ANSI Level A5 cut protection. A touch of spandex provides comfort and a true fit, while a polyurethane palm coating gives them a close, bare hand feel that’s ideal for sensitive jobs.

  • TenActiv™ STAGPN

    Product ID: STAGPN

    These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A4 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance.

  • TenActiv™ STAGCXPU

    Product ID: STAGCXPU

    A blend of high-performance fibers including aramid, steel, composite filament fiber and TenActiv™ yarn provides these 13-gauge gloves with the highest level of cut protection—ANSI Level A9. A polyurethane coating at the palms increases touch sensitivity, and hands enjoy a high level of dexterity. Their green color hides dirt, and they’re fully launderable for an easy refresh and product longevity.

  • TenActiv™ STAFGPU

    Product ID: STAFGPU

    These gloves feature a soft polyurethane palm coating that provides excellent grip and a high level of comfort. Their TenActiv™ yarn ensures ANSI Level A5 cut protection, and a 13-gauge knit delivers ANSI Level 4 abrasion resistance without sacrificing dexterity. Well-suited to a wide variety of tasks, from rubber and plastics manufacturing to general warehouse use.

  • TenActiv™ STAFGFNT

    Product ID: STAFGFNT

    A breathable TenActiv™ yarn provides these 13-gauge knit gloves with ANSI Level A4 cut protection, and a black foam nitrile palm coating offers a sponge-like grip in wet and oily conditions. They feature ANSI Level 4 abrasion resistance and a high level of dexterity, while their coloration helps to hide dirt between launderings. Excellent for handling oily machine parts.

  • TenActiv™ STACXPURT

    Product ID: STACXPURT

    These gloves include a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A6 cut protection along with polyurethane-coated palms that guarantee an excellent level of grip. ANSI Level 4 puncture resistance rounds out its safety features, while reinforced thumb crotches extend their lifespan for long lasting wear.

  • TenActiv™ STACXPNRT

    Product ID: STACXPNRT

    These gloves feature a TenActiv™/HPPE/steel/composite filament fiber that provides ANSI Level A7 cut protection and a nitrile reinforced thumb crotch that increases its lifespan. A touch of spandex yields high levels of comfort and tactile sensitivity, even as they maintain ANSI Level 4 abrasion resistance. Hands stay dry thanks to a micropore nitrile coating, which also features suction cup-like craters for increased grip in wet or oily conditions.

  • Superior Touch® SSXPU3OF

    Product ID: SSXPU3OF

    An open-finger design makes these gloves ideal for tasks that require a bare-hand feel, while a Dyneema® knit provides ANSI Level A2 cut protection. A polyurethane coating at the palm enhances their tactile quality while improving grip. The combination of a snug fit and stretchy material delivers a high level of comfort and dexterity.

  • Dexterity® SKFGFNLTC

    Product ID: SKFGFNLTC

    These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.

  • Emerald CX® SCXTAPVC

    Product ID: SCXTAPVC

    A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / -23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.

  • Superior Touch® S13BKPUQ

    Product ID: S13BKPUQ

    These gloves are made from a non-linting, non-marring and highly touch-sensitive fine-gauge nylon, making them an ideal choice for handling fine parts and glassware. A polyurethane coating improves grip and offers ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. A snug fit ensures lasting comfort and dexterity.

  • Dexterity® S13BFNVB

    Product ID: S13BFNVB

    These foam nitrile-dipped nylon work gloves provide impact-resistant back-of-the-hand protection and a fast-drying, moisture-wicking seamless-knit shell. They feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance and maintain a steady grip in light oil conditions. They also provide hands with a full range of motion and all-day comfort.

  • Emerald CX® S10NXFN

    Product ID: S10NXFN

    A blend of stainless steel and composite filament fibers provides ANSI Level 5 puncture resistance and ANSI Level 4 abrasion resistance. These 10-gauge, cut-resistant gloves are optimized for mining, metalwork, manufacturing, waste management and more. They feature nitrile palms for a superior grip and flexibility and have been treated with Ultra-Fresh for a 99.9% antimicrobial status. They’re also touch screen compatible, and latex free to prevent allergic reactions.

  • Chemstop™ N9B

    Product ID: N9B

    An all-over nitrile coating that resists oils, fuels and many organic solvents suit these heavy-duty gloves to applications involving oil and grease. Their cotton jersey support keeps hands comfortable and absorbs sweat. ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance provides added safety and protection.

  • Clutch Gear® MXHVPB

    Product ID: MXHVPB

    Palms lined with Punkban™ combined with a material woven with DuPont™ Kevlar® fiber provide these mechanic gloves with ANSI Level 4 puncture resistance. They also include ANSI Level A3 cut protection. Hi-viz lime-green backs provide enhanced visibility, and PVC Sure Grip® palm patches reduce the risk of slippage. Their elasticized cuffs guarantee a secure, comfortable fit, and soft fabric patches on the thumbs wipe away sweat.

  • Clutch Gear® MXHV2PB

    Product ID: MXHV2PB

    Full Punkban™ lining at the front and the back of the glove combined with a material woven with DuPont™ Kevlar® fiber provides ANSI Level 5 puncture resistance. These gloves also include ANSI Level A5 cut protection, making them an excellent choice for handling hypodermic needles. Their hi-viz lime green backs improve visibility, and adjustable Velcro tabs at the back of the wrist allow for a snug, secure fit. PVC Sure Grip® palm patches ensure that nothing will slip through the fingers.

  • Clutch Gear® MXGKGHVB

    Product ID: MXGKGHVB

    Built from tough goatskin, these gloves feature impact resistant back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level A5 cut protection. They’re made with wide elastic straps for a comfortable, adjustable fit, and benefit from flexible foam-laminated spandex backs that improve dexterity. Leather-wrapped fingertips boost their durability, while a hi-viz backing increases worker visibility.

  • Endura® 378GAHVB

    Product ID: 378GAHVB

    These built-tough goatskin gloves achieve ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Gunn-cut styling increases comfort and durability, while a pull-on fit makes it easy to get them on. Elasticized backs provide a secure fit, every time.

  • Endura® 378GOB

    Product ID: 378GOB

    Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.

  • TenActiv™ STAGPNVPI

    Product ID: STAGPNVPI

    The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A4 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.

  • TenActiv™ STAGHVPU

    Product ID: STAGHVPU

    A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.

  • Dexterity® SNTAPVCFB

    Product ID: SNTAPVCFB

    All-over PVC coating prevents these water-repellant gloves from stiffening in wet and freezing conditions, making them an excellent choice for any job involving contact with snow. Their soft fleece lining ensures hands stay warm in temperatures down to -5°C / 23°F, and their light weight and quick-drying properties provide maximum comfort.

  • Dexterity® SNTAPVC

    Product ID: SNTAPVC

    These lightweight, water-repellant gloves feature a soft fleece lining that keeps hands warm in temperatures down to -5°C / 23°F. A micropore PVC coating provides a high level of flexibility even in sub-zero temperatures, and a palm coating ensures a strong, steady grip. Quick-drying capabilities make them even more versatile.

  • Dexterity® S13BPVC

    Product ID: S13BPVC

    These 13-gauge nylon gloves have foamed PVC palms that resist glue, caulking materials, and other adhesives. They also feature ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance while offering a strong, steady grip in wet and oily conditions. Durable, fine-gauge nylon gives these gloves a bare-hand feel for ultimate dexterity. They can be machine washed and dried for easy refresh.

  • Dexterity® S13BFNT

    Product ID: S13BFNT

    These polyester work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.

  • Dexterity® S10LXQ

    Product ID: S10LXQ

    A latex palm coating provides these 10-gauge cotton polyester knit gloves with an outstanding grip in wet and dry conditions, as well as ANSI Level 4 puncture resistance and ANSI Level 4 abrasion resistance. Their high level of flexibility and comfortable ergonomic shape make them ideal general-purpose work gloves.

  • Clutch Gear® MXGKGHV

    Product ID: MXGKGHV

    Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable and personalized ID labels prevent loss.

  • Clutch Gear® MXGKGHTVB

    Product ID: MXGKGHTVB

    Thinsulate™ lining that warms hands in temperatures down to -15°C / 5°F optimizes these high-visibility goatskin gloves for work in icy winter conditions. They’re made from a tough, abrasion-resisting goatskin and feature extra back-of-hand protection to defend against knocks and bumps. Hook and loop closure tabs ensure a secure but comfortable fit and leather wrapping at the fingertips increases their lifespan.

  • Clutch Gear® MXGBE

    Product ID: MXGBE

    These mechanic gloves are built from quick-drying synthetic leather that performs well in wet or cold conditions, and benefit from flexible, foam-laminated spandex backs that allow for a high degree of dexterity. Their ergonomic shaping guarantees all-day comfort, and wide elastic cuffs with adjustable backs allow for a close, custom fit. Select areas are reinforced by PVC Diamond Grip patches with Poron® padding for a higher degree of durability and better grip.

  • Endura® 385CS

    Product ID: 385CS

    These gloves can stop a chain saw running at 3140 feet per minute. How? These gloves have been tested against European Standard EN 381-7. Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.

  • Endura® 66Q

    Product ID: 66Q

    These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their DuPont™ Kevlar® fiber lining delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with Kevlar® fiber for added seam integrity.

  • Endura® 399GKGTL5

    Product ID: 399GKGTL5

    Abrasion resistant goatskin leather and durable wing thumbs optimize these driver gloves for the long haul, while 6″ gauntlet cuffs provide extra protection. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. A Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 14°F.

  • Endura® 399GKGL5

    Product ID: 399GKGL5

    Abrasion resistant goatskin leather and durable wing thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with DuPont™ Kevlar® fiber and composite filament fiber provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. Testing places these gloves at an arc flash level 4 rating, and ANSI level 2 heat rating with protection up to 140°C / 284°F.

  • Endura® 378KMT4P

    Product ID: 378KMT4P

    These tough goatskin driver gloves are the first line of defense when impact injuries pose a potential risk. Their 4PRO™ back-of-hand protection offers an ANSI Level 3 impact rating that doesn’t compromise mobility, even in freezing cold conditions. A DuPont™ Kevlar® fiber / composite filament fiber lining offers 360° ANSI Level A5 cut protection, and an Arc Flash testing grade of 3 ensures that stray sparks won’t pose a threat.

  • Endura® 378KGTVB

    Product ID: 378KGTVB

    These tough goatskin gloves include reinforced back-of-hand protection to guard against impact while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. A padded palm increases durability while suppressing vibrations, and Thinsulate™ lining ensures warmth in temperatures down to -20°C / -5°F.

  • Endura® 378GOBBFC

    Product ID: 378GOBBFC

    These tough goatskin driver gloves feature crush-proof finger caps designed to protect from impact hazards, cuts, and punctures. An Oilbloc™ treatment that resists oil and water ensures maximum grip, and a padded palm dampens vibrations. Extra protection at the back-of-the hand guards against further impacts.

  • Endura® 378GKVSB

    Product ID: 378GKVSB

    These driver gloves are made from tough, abrasion-resistant goatskin that provides a close fit and optimal dexterity. They feature impact-resistant protection at the back of the hand and vibration-dampening padding at the palms for a strong, steady grip. An Oilbloc™ treatment prevents oils and other liquids from seeping into the gloves.

  • Endura® 375KGVB

    Product ID: 375KGVB

    The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360° ANSI Level A5 cut protection and ANSI Level 4 puncture protection. An Oilbloc™ treatment assures the highest level of oil and water resistance, and reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.

  • Endura® 375KGTVB

    Product ID: 375KGTVB

    The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360°ANSI Level A5 cut protection and ANSI Level 4 puncture protection. Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 15°F and an Oilbloc™ treatment assures the highest level of oil and water resistance. Reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.

  • Endura® 375CSI

    Product ID: 375CSI

    These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.

  • Endura® 370GFKL

    Product ID: 370GFKL

    These MIG welder gloves are built with tough goatskin leather on the outside and a fine-gauge DuPont™ Kevlar® interlock knit lining inside to allow for 360° cut protection and durability that minimizes interference with touch sensitivity. Their lining made with DuPont™ Kevlar® fiber offers heat and spark resistance in addition to cut protection. And their wide gauntlet cuffs are gusseted, making it easier to put them on and take them off.

  • Endura® 370CTIG

    Product ID: 370CTig

    The wide fit of this Canadian-style gauntlet cuff and the supple pliability of goatskin provide these TIG welding gloves with the highest possible level of mobility for precise jobs. At the same time, the incredible toughness of goatskin ensures that these flexible gloves are built to last.

  • Endura® 365HBR

    Product ID: 365HBR

    Built extra-tough from horsehide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.

  • Endura® 365DLXFTL

    Product ID: 365DLXFTL

    These heavyweight cowgrain leather gloves feature retroreflective silver strips along their 6″ gauntlet cuffs for enhanced visibility, and benefit from flexible Thinsulate™ lining that cold-proofs them in temperatures down to -10°C / 15°F. Sewing thread is made with Kevlar® fiber for added seam integrity. Reinforced leather at the palm provides this high-use area with extra strength. Treated to resist water, oil and stains.

  • Endura® 365DLX6

    Product ID: 365DLX6

    A 6″ gauntlet cuff that features retroreflective silver strips provides these resilient cowgrain leather gloves with a superior degree of visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. A high level of water, oil, and stain resistance heighten their durability. A performance patch at the thumb and palm increases dexterity.

  • Endura® 365DLX2TL

    Product ID: 365DLX2TL

    These heavyweight horsehide leather gloves feature retroreflective silver strips along their 2″ cuffs for enhanced visibility. Flexible Thinsulate™ lining provides cold-proofing in temperatures down to -10°C / 15°F . Sewing thread is made with Kevlar® fiber for added seam integrity. A reinforced leather palm provides this high-use area with extra strength. Treated to resist water, oil and stains.

  • Endura® 365DLX2

    Product ID: 365DLX2

    2″ cuffs marked by retro-reflective silver strips provide these heavyweight horsehide leather lineman gloves with visibility that you can count on. Sewing thread is made with Kevlar® fiber for added seam integrity. A performance patch at the thumb and palm make them hard-wearing. A high level of resistance to water, oil and stains increases their utility even further.

  • Endura® 335DTIG

    Product ID: 335DTig

    The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.

  • Endura® 76YBDQ

    Product ID: 76YBDQ

    These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.

  • Endura® 76BFTL

    Product ID: 76BFTL

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.

  • TenActiv™ STAGYPNVB

    Product ID: STAGYPNVB

    These 13-gauge TenActiv™ gloves offer ANSI Level A5 cut protection which is matched with impact-resistant back of hand protection and a hi-viz knit shell. Their micropore nitrile coating displaces oil which guarantees a steady grip on slick or slippery surfaces, making them an excellent choice in heavy construction and oil & gas industries.

  • TenActiv™ STAFGFNVB

    Product ID: STAFGFNVB

    These knit gloves are made from a tough TenActiv™ yarn that provides ANSI Level A4 cut protection, and benefit from impact-resistant back of hand protection that ensures ANSI Level 4 abrasion resistance. They remain highly dexterous and breathable thanks to their string-knit shell construction, and feature foam nitrile-coated palms that maintain a steady grip even in wet or oily conditions.

  • TenActiv™ STACXPNRVB

    Product ID: STACXPNRVB

    Featuring both a TenActiv™-blended yarn for ANSI Level A7 cut protection and impact-resistant back-of-hand protection, these composite-knit gloves are built to perform in any environment that presents cut and impact hazards. A micropore nitrile coating at the palm assures a steady grip even in wet or oily conditions, and patches of hi-viz color increase visibility.

  • Emerald CX® SKWCPLP

    Product ID: SKWCPLP

    A strong grip meets high cut resistance in the form of these string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester that provides 360° ANSI Level A5 cut protection. Their leather palms increase comfort and durability, while providing a strong, steady grip on lightly oiled metal which makes these gloves ideal for handling heavy metal parts as well as glass or sharp objects.

  • TenActiv™ SHVPNFBVB

    Product ID: SHVPNFBVB

    These hi-viz gloves are a perfect match for jobs that require protection from impact hazards and liquids. They’re built from a tough TenActiv™ yarn for 360°ANSI Level A5 cut protection, and feature impact-resistant back-of-hand protection without sacrificing dexterity. A nitrile coating that covers ¾ of the back of the glove ensures a steady grip on slippery surfaces, and double-stitched PVC patches at the thumbcrotch and index finger extend their lifespan.

  • Cool Grip® SCPSCLP

    Product ID: SCPSCLP

    The combination of SilaChlor® insulation that offers heat resistance in temperatures up to 315°C (600°F) and tough leather palms that wrap around finger sides makes these heat-resistant gloves perfectly suited to work in metal production, rubber and plastics manufacturing, and more. They offer 360°ANSI Level A3 cut resistance, ANSI Level 4 puncture resistance, and ANSI Level 5 heat resistance.

  • TenActiv™ SBTAKLP

    Product ID: SBTAKLP

    A thin line construction provides these 10-gauge cut-resistant gloves with a high level of dexterity. Their steel reinforced TenActiv™ yarn provides 360° ANSI Level A8 cut protection, while premium side split leather palms increase their abrasion resistance. Sewing thread is made with Kevlar® fiber for added seam integrity. Leather reinforcement at the thumb crotch greatly increases the gloves’ lifespan.

  • Chemstop™ S15KGVNVB

    Product ID: S15KGVNVB

    Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A4 cut protection, these gloves guard against a wide variety of risks. Their nitrile coating provides a secure grip on even wet and slippery surfaces, gauntlet cuffs increase wrist safety and green hi-viz backs offer enhanced visibility.

  • Chemstop™ S15KGVNFVB

    Product ID: S15KGVNFVB

    Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A6 cut protection, these fleece-lined winter gloves guard against a wide variety of risks. Their fleece lining ensures that hands stay warm in temperatures down to -5°C (23°F), and a nitrile coating provides a secure grip on even wet and slippery surfaces. Gauntlet cuffs increase wrist safety and hi-viz backs offer enhanced visibility.

  • Emerald CX® S13KBGLP

    Product ID: S13KBGLP

    Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.

  • Vibrastop™ S10VIB

    Product ID: S10VIB

    These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.

  • Endura® 398KGLBG

    Product ID: 398KGLBG

    These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 4 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 3 puncture resistance.

  • Endura® 378GOTTL

    Product ID: 378GOTTL

    These winterized, close-fitting driver gloves have hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability. 100g of Thinsulate™ lining keeps hands warm and safe in temperatures down to down to -30°C / -22°F.

  • Endura® 378GOT

    Product ID: 378GOT

    These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.

  • Endura® 378GOBTL

    Product ID: 378GOBTL

    Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.

  • Endura® 378GOBTKL

    Product ID: 378GOBTKL

    These goatskin gloves benefit from a DuPont™ Kevlar® fiber / composite filament fiber lining that provides 360° ANSI Level 4 cut protection and ANSI Level 4 puncture protection. Their Oilbloc™ treatment delivers outstanding water and oil resistance, and a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F. An Arc Thermal Performance Value (ATPV) of 52 cal/cm² defends from stray sparks and flames.

  • Endura® 378GOBKL

    Product ID: 378GOBKL

    These tough goatskin gloves feature an elasticized back and a slip-on fit that provides maximum comfort and ease of use. Abrasion resistant goatskin and an oil and water-resisting Oilbloc™ treatment extend product longevity. A DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.

  • Endura® 378GKTTL

    Product ID: 378GKTTL

    A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.

  • Endura® 378GKGTL

    Product ID: 378GKGTL

    A cut-and-sewn construction provides these winter driving gloves with a high degree of comfort and dexterity. The resilience of goatskin and durability of a keystone thumb design ensures product longevity while a DuPont™ Kevlar® fiber / composite filament fiber liner guarantees 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance. Their warming but lightweight Thinsulate™ lining keeps fingers warm in temperatures down to -30°C / -22°F.

  • Endura® 378GKTKL

    Product ID: 378GKTKL

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A3 cut protection and ANSI Level 4 puncture resistance.

  • Endura® 378GKTFG

    Product ID: 378GKTFG

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. A level 3 rating for Arc Flash testing keeps hands safe from sparks and flame.

  • Endura® 378GKTA

    Product ID: 378GKTA

    These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion-resistant goatskin and the durability of a keystone thumb design extends product longevity. As time goes by, these gloves will mold to your hand for a close and comfortable fit.

  • Endura® 378GKGVBE

    Product ID: 378GKGVBE

    These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A6 cut protection. They defend the hand from impact injuries, while a padded palm increases durability and suppresses vibrations.

  • Endura® 378GKGE

    Product ID: 378GKGE

    These soft goatskin driving gloves provide a lightweight, tailored fit thanks to their cut-and-sewn construction, while including key cut and spark-resistant features. They’re fully lined with a DuPont™ Kevlar® fiber / composite filament fiber that provides 360° ANSI Level A4 cut resistance and ANSI Level 4 puncture resistance. They also feature an Arc Flash testing level of 3 for protection from sparks and flame.

  • Endura® 378CXGOB

    Product ID: 378CXGOB

    These ultra-abrasion-resistant goatskin gloves are your first line of defense against punctures and cuts. Lining made from a blend of para-aramid and wire-core provides 360° ANSI Level A9 cut protection. They also provide ANSI Level 5 protection from punctures. Its Oilbloc™ treatment resists oil and water to prevent slips when safety matters most.

  • Endura® 378A

    Product ID: 378A

    These driver gloves are made from tough cowgrain leather that resists abrasions and repels water and will form to the hands over time for a closer, comfortable fit. Design features including gunn-cut styling and a keystone thumb maximize durability and dexterity, while elasticized backs make the fit snug yet flexible.

  • Endura® 365DLXDTL

    Product ID: 365DLXDTL

    200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -20°C / -4°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.

  • Endura® 365DLX2KG

    Product ID: 365DLX2KG

    These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while DuPont™ Kevlar® fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.

  • Endura® 365DLX2DT

    Product ID: 365DLX2DT

    200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to provide warmth in temperatures down to -15°C / 5°F without sacrificing mobility. A Waterstop™ treatment repels water, oil and stains. 3M™ Scotchlite™ retroreflective silver strips located on the 2″ cuffs provide enhanced visibility, sewing thread is made with Kevlar® fiber for added seam integrity, and reinforced palms provide a high level of durability.

  • Endura® 361DLXTKG

    Product ID: 361DLXTKG

    These cowgrain leather mitts meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands. They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F . Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection.

  • Endura® 361DLXFTL

    Product ID: 361DLXFTL

    These winter mitts are built with a heavyweight horsehide leather that’s reinforced at the palm and thumb to increase durability, especially in critical high-wear areas. Their Thinsulate™ lining keeps hands warm in temperatures down to -20°C / -4°F, and a Waterstop™ treatment repels water and oil. A one-finger design increases dexterity, and silver strips with hi-viz overlay at the cuffs provide enhanced visibility. These heavy duty winter mitts are also designed to offer excellent puncture protection.

  • Endura® 304BOA

    Product ID: 304BOA

    The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.

  • Endura® 76B

    Product ID: 76B

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.

  • Endura® 69BSKFFL

    Product ID: 69BSKFFL

    These tough split-leather gloves offer ANSI Level 4 puncture resistance and are lined with a DuPont™ Kevlar® fiber blend for 360° ANSI Level A5 cut protection. They’re a heavy-duty work glove that fuses durable construction with a high level of cut resistance. Sewing thread is made with Kevlar® fiber for added seam integrity. A Gunn-cut pattern prevents seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.

  • Endura® 66BFTLWT

    Product ID: 66BFTLWT

    These split-fitter gloves are made from choice cowhide leather and feature full leather thumbs, fingertips, and knuckle straps for long-lasting durability. Their 2.5″ rubberized cuffs and a waterproof bladder enable them to withstand wet conditions, while a full Thinsulate™ liner keeps fingers warm in temperatures down to -20°C / -4°F.

  • Endura® 66BRBOA

    Product ID: 66BRBOA

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.

  • Endura® 66B

    Product ID: 66B

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.

  • Endura® 378GKGVB

    Product ID: 378GKGVB

    These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A5 cut protection while defending against impact injuries. They’ve received an Oilbloc™ treatment which prevents oils and liquids from soaking into the leather, and a padded palm increases durability while suppressing vibrations. A level 3 Arch Flash testing rating ensures protection from sparks and flame.