Product ID: L868FXVB
Coated gloves for dry chemical protection and secure grip
Our Chemstop™ L868FXVB gloves protect hands from both wet and dry chemicals, fine dust particles, and are non-reactive against concrete and common materials found in oil and gas. The tough, protective latex coating is crinkled to offer secure grip while back-of-hand bumpers protect against knocks and bumps. The gloves also feature 360° cut protection with high cut resistance and are highly tactile to perform precision work.
Product ID: 378GOBTX
Goatskin driver gloves with short cuffs that resists oil and water, along with a maximum cut liner
Our Endura® 378GOBTX goatskin driver gloves are treated with Oilbloc™ to resist oil and water, as well as short cuffs and ANSI Cut Level A9 TenActiv liner. The short cuffs are a safety cuff and the seamless knit liner ensures a more soft, cooler, and comfortable fit. The goatskin leather provides more dexterity and durability. Ideal for working in high cut hazard conditions where oil and water resistance is needed.
Product ID: 361GTLVB
Cold-rated winter mitt with impact protection plus knit cuffs to keep out debris and hazards
Our Endura® 361GTLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -35°C / -31°F. Leather is treated to resist liquids while the knit cuffs to help keep out dirt, debris, and other hazards. Finger slots in the mitt help reduce hand fatigue when handling material.
Product ID: 378TXTVBE
Economical 360° cut resistance and impact protection for temperatures down to -20°C / -4°F
Our economy choice Endura® 378TXTVBE gloves for cut resistant winter protection in temperatures down to -20°C / -4°F. TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A7 cut resistance while unpadded palms offer a wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails. Back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.
Product ID: 365DLX2TKG
Cold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs
Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.
Product ID: 304TXTL
Keep hands safe from cuts and cold with protection down to -35°C / -31°F
Our Endura® 304TXTL slip-on mitts feature a cut-resistant TenActiv™ liner to protect against sharp objects and keep hands warm down to temperatures of -35°C / -31°F. Their elasticized wrists and faux fur cuffs block out cold to retain warmth in frigid conditions while a pair of plastic clips ensures they won’t be separated in storage.
Product ID: 378GCXVB
Maximum Cut Protection to Our Impact Line
Our new 378GCXVB gloves bring maximum cut resistance to our impact protection offering. The lining is made with DuPont™ Kevlar® fiber which provides 360° ANSI Level A9 cut protection while the flexible back-of-hand plate offers ANSI Level 2 impact protection – all in a highly durable leather shell that resists oil and water. Originally designed for use in oil and gas applications, these versatile gloves are useful for high-hazard applications in mining, forestry, construction, and other industries where cut and impact risks can be high.
Product ID: 378GTXOTL
Protection, warmth, and comfort coexist
For users in cold/winter environments, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable, and more breathable than other liner materials. These gloves feature ANSI A6 cut resistance as well as ANSI Puncture Level 4. They also incorporate our patented palm-grip technology to improve dexterity and grip.
Product ID: 378GTXOT
Get a grip on protection without sacrificing comfort
For users in warm environment industries, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable and more breathable than other liner materials. These gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4. They also incorporate our patented palm-grip technology to enhance grip and durability.
Product ID: 378GOBKVB
Arc Flash-rated driver gloves that resist oil, water, punctures, and cuts
These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.
Product ID: 378GOBFC
Crush-resistant leather finger cap gloves that protect fingertips from pinch-point hazards
Pinch-point hazards have met their match in these tough leather gloves equipped with crush-resistant finger caps that safeguard fingertips from crush, impact, cut, and puncture hazards while still allowing flexibility and movement needed for everyday work. Additional comfort is provided with a keystone thumb design and full cotton liner. Oilbloc™ treatment repels water and oil.
Product ID: 378GKG4P
Multi-feature driver gloves with extreme impact resistance and arc flash protection
This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².
Product ID: S13CXPNT
Oil resisting gloves with 360° cut protection and a strong, steady grip
Made from a 13-gauge blend of DuPont™ Kevlar® fiber and stainless-steel Wire-Core™, these gloves offer ANSI Level 4 abrasion resistance, 360° ANSI Level A6 cut protection, and ANSI Level A3 puncture resistance. A micropore nitrile palm coating keeps hands dry by resisting oils and liquids, while craters function like tiny suction cups to offer a strong, steady grip on wet or oily surfaces. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
Product ID: NS300B
Chemical-resistant gloves that provide a strong grip in cold conditions
These chemically resistant gloves feature a PVC formulation that provides outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions, and triple foam lining increases warmth. Safety cuffs and a shorter length allow for easy on and off.
Product ID: 378GAHVB
Built tough goatskin gloves for when visibility matters most
These built-tough goatskin gloves achieve ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Gunn-cut styling increases comfort and durability, while a pull-on fit makes it easy to get them on. Elasticized backs provide a secure fit, every time.
Product ID: 378GOB
Easy-on goatskin gloves that resist oil and water
Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.
Product ID: 66Q
Highly durable, split-leather fitter gloves
These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.
Product ID: 378KMT4P
Our most feature-packed winter glove to protect against impact, cuts and cold
These tough goatskin multi-hazard driver gloves feature our 4PRO™ back-of-hand protection to deliver maximum impact resistance that doesn’t compromise mobility, even in freezing cold temperatures. The lining is made with DuPont™ Kevlar® fiber which provides 360° cut protection and ANSI Level A6 cut resistance. These feature-packed gloves also include vibration-dampening palms and are treated with Oilbloc™ to repel water and oil.
Product ID: 378KGTVB
Cold-rated arc flash protection with cut resistance that resists water and liquids
Our Endura® 378GOBTKL goatskin gloves keep hands warm down to -25°C / -13°F and are ideal for non-energized work where arc flash is present and resistance to liquids is a must. Made with material designed to resist flame, they are arc flash rated level 4 with an ATPV of 49 cal / cm², offer ANSI 2 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A4 cut resistance. These gloves are treated to resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
Product ID: 378GOBBFC
Highest-level protection against finger crush hazards
These tough goatskin driver gloves feature crush-proof finger caps designed to protect from impact hazards, cuts, and punctures. An Oilbloc™ treatment that resists oil and water ensures maximum grip, and a padded palm dampens vibrations. Extra protection at the back-of-the hand guards against further impacts.
Product ID: 378GKVSB
Durable leather gloves that protect hands from knocks and bumps for material handling and maintenance
Our Endura® 378GKVSB driver gloves are made with durable leather that protects hands against knocks and bumps for material handling and maintenance tasks. Treated to resist water and liquids, they feature back-of-hand ANSI 2 impact protection against knocks and bumps, plus padded palms for comfort when material handling. The keystone thumb design improves durability against wear and tear for a longer wear life.
Product ID: 365DLX2TL
Durable, high visibility lineman gloves for warmth down to -10°C / 14°F
These heavyweight horsehide leather gloves feature retroreflective silver strips along their 2″ cuffs for enhanced visibility. Flexible Thinsulate™ lining provides cold-proofing in temperatures down to -10°C / 14°F . Sewing thread is made with Kevlar® fiber for added seam integrity. A reinforced leather palm provides this high-use area with extra strength. Treated to resist water, oil and stains.
Product ID: 365DLX2
Lineman gloves with short 2-inch hi-viz cuffs
Our Endura® 365DLX2 lineman gloves feature a shorter 2-inch cuff that won’t get in the way when working in tight spaces or wearing clothing with bulky sleeves. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These gloves are treated to repel water, oil, and stains and feature hi-viz bands on the shorter cuffs for visibility.
Product ID: 76YBDQ
Sweat absorbing, everyday gloves with added forearm protection
These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.