This cut icon is followed by the 360 cut icon with special spacing

Show Filters

FILTER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
FILTER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Dexterity® SNAPVC

    Product ID: SNAPVC

    Dark gray cut-resistant gloves that hide grime and remain flexible when protecting hands in cold down to -5°C / 23°F

    Our cold-rated Dexterity® SNAPVC gloves protect against cuts with a dark coloring to hide dirt and stains for a longer wear lifecycle. They provide 360° cut protection with ANSI A3 cut protection plus a fleece lining to keep hands warm down to -5°C / 23°F. The PVC palm coating provides strong grip and protects against stiffness in cold weather for improved range of motion in frigid wet conditions.

  • Dexterity® S18KGDNE

    Product ID: S18KGDNE

    Arc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges

    Our arc flash-rated Dexterity® S18KGDNE gloves offer protection against cut hazards and unfinished edges and are touchscreen friendly to seamlessly move between tasks. Arc flash-rated level 3 with an ATPV of 25 cal / cm², they’re made from electrostatic dissipative ParaActiv™ engineered yarn to protect microelectronics and provide 360° cut protection with ANSI A3 cut resistance. Additionally, the cuffs offer ANSI A6 cut protection for protection against sharp edges found in electrical boxes. These gloves also feature a neoprene palm coating material that is known to resist flame for steady grip.

  • Contender™ KAWC

    Product ID: KAWC

    Low cut protection sleeves that guard against sparks, flames, and heat

    Our Contender™ KAWC sleeves provide protection against heat, sparks, flame, and low cut hazards. They’re made from double-layered ParaActiv™ engineered yarn for 360° cut protection with ANSI A3 cut resistance and ANSI 2 heat protection that meets ASTM D6413 standards to resist sparks and flame. Tubular knit design protect the entire length of the arm when working with metals.
    Available in a variety of sizes, with or without thumbholes, that range from 6 inches to 22 inches in length.

  • Dexterity® S18KGFN

    Product ID: S18KGFN

    Ultra-thin silicone-free touchscreen compatibly for protection against minor cut hazards

    Our ultra-thin Dexterity® S18KGFN gloves are silicone-free and provides touchscreen compatibility plus protection against minor cut hazards. ParaActiv™ engineered material offers 360° cut protection with ANSI A3 cut resistance. The foam nitrile palm coating offers a steady wet grip and are touchscreen compatible to seamlessly move between tasks.

  • TenActiv™ S15TAFGPU

    Product ID: S15TAFGPU

    Cut resistant, versatile gloves with a strong grip and barehand feel

    A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.

  • Chemstop™ NE246FFL

    Product ID: NE246FFL

    Heat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks

    Our Chemstop™ NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.

  • Chemstop™ NE240TKL

    Product ID: NE240TKL

    Heat-resistant 16-inch chemical gloves for protection against caustics in maintenance tasks

    Our Chemstop™ NE240TKL gloves are 16 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A cotton liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Long-length gloves provide extra forearm coverage and diamond-grip textured palms offer steady grip.

  • North Sea™ N230FL

    Product ID: N230FL

    Waterproof chemical-resistant nitrile cut protection that stays flexible in cold conditions plus durability for long wear life

    Our waterproof North Sea™ N230FL cut protection gloves are made with specially formulated nitrile that stays flexible in cold conditions for better grip and is more durable for longer wear life. Lined with fleece for warmth down to -15°C / 5°F, they resist oil, natural solvents, and water, making them ideal for work in fisheries or for tasks that require chemical protection in cold environments. They provide 360° cut protection with low ANSI A3 cut resistance and feature maximum ANSI 6 abrasion protection for a longer wear life. The nitrile coating helps resist oil and other solvents and is textured for improved, steady grip on wet or oily surfaces.

  • Cool Grip® SPFGSS

    Product ID: SPFGSS

    Maximum heat protection with strategic silicone-striped palms for hot parts handling

    Our Cool Grip® SPFGSS gloves offer maximum heat protection with silicone stripes on the palm for grip and comfort when handling hot parts. Made with latex-free materials, they provide 360° cut protection with ANSI A3 cut resistance and maximum ANSI 5 heat protection. Strategically placed silicone palm stripes increase grip and allow air channeling for heat resistance  .

  • Dexterity® SNTAPVCFB

    Product ID: SNTAPVCFB

    Cold-rated with incidental cut hazard protection and extended water-resistant palm coating that won’t stiffen in cold temperatures

    Our cold-rated Dexterity® SNTAPVCFB PVC gloves offer extended palm coating for water protection that won’t stiffen in cold temperatures. They provide 360° cut protection with low ANSI A3 cut resistance while their fleece lining keeps hands warm down to -5°C / 23°F. Extended ¾ PVC palm coating covers fingers up to the knuckles for water protection that resists stiffness in cold temperatures, improving range of motion in wet and wintry conditions.

  • Dexterity® SNTAPVC

    Product ID: SNTAPVC

    Cut-resistant string knit with extended palm coating that won’t stiffen in cold temperatures for protection down to -5°C / 23°F

    Our Dexterity® SNTAPVC gloves provide cold protection with an extended palm coating that won’t stiffen in frigid temperatures for range of motion. They provide 360° cut protection with ANSI A3 cut resistance while a fleece lining keeps hands warm down to -5°C / 23°F. Extended PVC palm coating provides steady grip that remains flexible in cold temperatures.

  • Cool Grip® SCPSCLP

    Product ID: SCPSCLP

    Metal fabrication and foundry gloves with cushioning for comfort when handling many hot parts

    Our Cool Grip® SCPSCLP gloves are ideal for metal fabrication and foundry when handling hot parts for an extended amount of time. These cotton / nylon gloves feature durable leather palms with a SilaChlor® layer that provides ANSI 5 heat protection for the palms for sustained handling of handling hot material and painted parts. The ANSI A3 cut resistant leather palms also offer cushioning when carrying heavy parts and absorbs oil for better grip.

  • Endura® 378GKTKL

    Product ID: 378GKTKL

    Dexterous leather gloves for protection against minor cut hazards

    Our Endura® 378GKTKL gloves provide protection against minor cut hazards and offers a longer wear life while retaining dexterity. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A3 cut resistance while supple goatskin leather offers better mobility and dexterity. A keystone thumb design maximizes durability for a longer wear life.

  • Chemstop™ NE250TRC

    Product ID: NE250TRC

    Heat-resistant 20-inch chemical gloves rubber cuff extension for protection against caustics in maintenance tasks

    Our Chemstop™ NE250TRC gloves are 20 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. An acrylic liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves with additional rubber cuff extension provide extra arm coverage and a diamond-grip textured palms offer steady grip.

  • Dexterity® TKTAGLX

    Product ID: TKTAGLX

    Cold-rated cut protection with crinkle latex palms for better wet grip and flexibility

    Our Dexterity® TKTAGLX gloves provide wet grip and cold protection down to -5°C / 23°F. Made with TenActiv™ engineered yarn, they offer 360° cut protection with ANSI A3 cut resistance while the crinkle latex palm coating provides better wet grip.

No products in your box.