-
Emerald CX® SCXPNTFC
Product ID: SCXPNTFCTop level 360° cut protection and a strong grip meets liquid resistance
These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
TenActiv™ S13TAFGPU
Product ID: S13TAFGPUComfortable, cut resistant gloves with a strong grip
A non-linting 13-gauge continuous filament yarn that’s stronger than steel provides these gloves with ANSI Level A5 cut resistance and ANSI Level 5 puncture resistance. Their polyurethane palm coatings ensure top-notch dexterity and a strong grip. A snug fit with ergonomic shaping provides hands with all-day comfort.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A5 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAFGPU
Product ID: STAFGPUDurable cut-resistant everyday gloves with non-marring palms for dry grip and sense of feel
Our TenActiv™ STAFGPU gloves offer cut resistance with polyurethane palm coating for a stronger dry grip and tactile feel. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance while non-marring palms are ideal for assembly, glass, and material handling.
-
Emerald CX® SCXTAPVC
Product ID: SCXTAPVCHigh 360° cut protection gloves that keep hands warm and dry down to -5°C / 23°F
A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / 23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.
-
Clutch Gear® MXGKGHVB
Product ID: MXGKGHVBDurable hi-viz mechanics style gloves with cut and impact protection
Our Clutch Gear® MXGKGHVB hi-viz gloves offer protection against cut and impact hazards. Made from TenActiv™ engineered yarn liner to provide 360° cut resistance with ANSI A5 cut protection plus hi-viz back-of-hand ANSI A2 impact resistance against knocks and bumps. They feature leather-wrapped fingertips and palms for extra durability, synthetic back-of-hand for comfort, and adjustable wrist closure for a secure fit.
-
TenActiv™ STAGPNVPI
Product ID: STAGPNVPICut protection meets vibration dampening
The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A5 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.
-
TenActiv™ STAGHVPU
Product ID: STAGHVPUCut-resistant gloves that offer high visibility and a tactile touch
A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.
-
Dexterity® SKG/PXNE
Product ID: SKG/PXNEArc Flash rated gloves that stand up to heat and cold
The combination of ParaActiv™ engineered yarn and Protex® yarn provides these gloves with 360° ANSI Level A5 cut resistance and ANSI Level 4 heat resistance. Their lining ensures that hands stay warm in temperatures down to -5°C / 23°F, and a flame-resistant neoprene palm coating provides a strong, steady grip in wet or dry conditions. They’re capable of offering protection from heat in temperatures up to 260°C / 500°F and feature a level 3 Arc Flash rating.
-
Contender™ SBKG
Product ID: SBKGBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.
-
Clutch Gear® MXGKGHV
Product ID: MXGKGHVHi-viz mechanic gloves with cut protection for material handling and visibility
Our Clutch Gear® MXGKGHV gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance for material handling. These hi-viz gloves feature leather wrapped fingertips and palms plus a hook and loop wrist closure for a snug, comfortable fit.
-
Clutch Gear® MXGKGHTVB
Product ID: MXGKGHTVBDexterous, high-visibility mechanic gloves with winter protection down to -20°C / -4°F
Thinsulate™ lining that warms hands in temperatures down to -20°C / -4°F optimizes these high-visibility goatskin gloves for work in icy winter conditions. They’re made from a tough, abrasion-resisting goatskin and feature extra back-of-hand protection to defend against knocks and bumps. Hook and loop closure tabs ensure a secure but comfortable fit and leather wrapping at the fingertips increases their lifespan.
-
Endura® 505KGWS
Product ID: 505KGWSArc/Stick welding gloves with full forearm protection and 360° cut resistance
Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and liquid resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 375GKGVB
Product ID: 375GKGVBImpact-resistance with 360° cut protection and vibration dampening
The ParaActiv™ engineered yarn lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.
-
Endura® 375KGTVB
Product ID: 375KGTVBDriving gloves that offer exceptional grip and winter warmth down to -10°C / 14°F
The DuPont™ Kevlar® fiber/ composite filament lining within these tough liquid resistant goatskin driver gloves provides 360°ANSI Level A5 cut protection and ANSI Level 4 puncture protection. Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 14°F. Reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement. Testing places these gloves at an arc flash level 3 rating.
-
TenActiv™ STAGYPNVB
Product ID: STAGYPNVBHigh-visibility impact resistance and cut protection with an excellent grip
These 13-gauge TenActiv™ gloves offer ANSI Level A5 cut protection which is matched with impact-resistant back of hand protection and a hi-viz knit shell. Their micropore nitrile coating displaces oil which guarantees a steady grip on slick or slippery surfaces, making them an excellent choice in heavy construction and oil & gas industries.
-
TenActiv™ SHVPNFBVB
Product ID: SHVPNFBVBHi-viz with cut protection and impact resistance plus ¾ palm coating for extra oil protection
Our TenActiv™ SHVPNFBVB hi-viz gloves offer cut protection and impact resistance with a ¾ palm coating for additional liquid and oil protection. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, plus green hi-viz back-of-hand bumpers offer high visibility and ANSI 2 impact protection. They are ¾ dipped with micropore nitrile palm coating for steady wet grip. They feature an extended reinforced thumb crotch for longevity and protection against wear and tear when material handling.
-
Chemstop™ S15KGVNVB
Product ID: S15KGVNVBHi-viz chemical gloves with cut protection and impact resistance
Our Chemstop™ S15KGVNVB PVC chemical gloves feature hi-viz impact-resistant bumpers for back-of-hand protection and a ParaActiv™ engineered yarn liner with high ANSI A5 cut resistance. The nitrile hand coating offers steady wet grip, while the gauntlet cuffs provide extra wrist safety.
-
Emerald CX® S13KBGLP
Product ID: S13KBGLPTear-resistant gloves built to be as tough as the materials they handle
Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.
-
Endura® 378GKTFG
Product ID: 378GKTFGDurable arc flash-rated gloves with high cut protection for longer wear life
Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.