Product ID: KTX1HV
Hi-viz maximum cut-resistant sleeves that are cool-to-the-touch
Our TenActiv™ KTX1HV hi-viz sleeves offer maximum cut protection and visibility. Made from TenActiv™ engineered yarn, they provide 360° cut protection with extreme ANSI A9 cut resistance. The single layer design improves breathability and flexibility plus the TenActiv™ yarn is cool-to-the-touch for a more comfortable fit. Hi-viz color for better visibility and arm placement. Inner bicep elastic eliminates any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
Available with thumbholes; KTX1HV18TH, KTX1HV22TH, KTX1HV12TH (Made to Order) or without; KTX1HV18, KTX1HV22
Product ID: KTX1T
Breathable single layer sleeves with maximum cut resistance
Our TenActiv™ KTX1T sleeves offer maximum cut protection. Made from TenActiv™ engineered yarn, they provide 360° cut protection with extreme ANSI A9 cut resistance. Ideal for material handling, the single layer design improves breathability and flexibility plus the TenActiv™ yarn is cool-to-the-touch for a more comfortable fit. Inner bicep elastic eliminates any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit
Available with thumbholes; KTX1T18TH, KTX1T22TH or without; KTX1T18, KTX1T22
Product ID: 378GOBTX
Goatskin driver gloves with short cuffs that resists oil and water, along with a maximum cut liner
Our Endura® 378GOBTX goatskin driver gloves are treated with Oilbloc™ to resist oil and water, as well as short cuffs and ANSI Cut Level A9 TenActiv liner. The short cuffs are a safety cuff and the seamless knit liner ensures a more soft, cooler, and comfortable fit. The goatskin leather provides more dexterity and durability. Ideal for working in high cut hazard conditions where oil and water resistance is needed.
Product ID: 678KTA
Snug-fitting, keystone thumb driver gloves for dexterity and durability
These close-fitting driver gloves are made from tough split cowhide leather with a keystone thumb for more flexibility and dexterity, without forfeiting comfort. Ideal for working in low hazard conditions.
Product ID: S21TXUGFN
Ultra-thin with maximum cut protection
Our hi-viz TenActiv™ S21TXUGFN gloves are silicone-free and deliver the industry’s highest level of cut protection in a thin 21-guage knit. With a barehand feel, they offer high durability without sacrificing flexibility which makes them ideal for asks with rish of extreme cut hazards that also requires a high level of dexterity. The ultra-thin foam nitrile palm coating provides a strong, steady grip in lightly oiled conditions, all while being touchscreen compatible.
Product ID: S15GPUTS
Touchscreen gloves that won’t interfere with scanners
Our SuperiorTouch® S15GPUTS gloves are ideal for warehouse and item-picking workers. The new PU palm formula improves touchscreen capacity, and the gray shell won’t interfere with scanners to help improve accuracy. Perfect for workers who require the dexterity to handle large volumes of order-picking through boxes and items.
Product ID: S21TXUFN
The world’s thinnest glove with maximum cut protection and steady grip
The Tenactiv™ S21TXUFN is the world’s first 21-gauge glove to deliver the highest-level of cut protection. With a barehand feel, it also provides both durability and puncture protection without sacrificing flexibility. The ultra-thin nitrile palm coating offers a strong grip that won’t slip, all while being touchscreen compatible.
Product ID: SLSXB
Fully washable, antimicrobial sleeves with extreme cut protection
Ideal for food processing tasks that involve a high risk of lacerations, these fully washable sleeves provide ANSI Level A8 cut protection. Treated with an active agent to achieve 99.9% antimicrobial status, they can be safely laundered in temperatures up to 85°C / 185°F. An attachable clip at the bicep prevents slippage, while a latex-free construction reduces the risk of allergic reactions. At 21 inches in length, these sleeves provide maximum coverage. They are also FDA and CFIA-compliant.
Product ID: KBKB1T
Flame-retardant, cut-resistant sleeves optimized for welding work
Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.
Product ID: KAW1C10
Heat-resistant sleeves that guard against cuts
Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
Product ID: KAWC
Cut-resistant sleeves that guard against sparks, flames, and heat
Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
Product ID: S18TAXFN
Hi-Viz cut protection with a strong grip and barehand feel
These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.
Product ID: RDNMD
Metal detectable industrial grade disposable gloves with a strong wet/dry grip
These industrial grade disposable gloves are metal detectable to reduce costs associated with accidental contaminations and food waste. Designed with food industry workers in mind, they’re made from nitrile material, which is much stronger and more durable than vinyl. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78″ while texturized fingertips provide a strong, wet/dry grip. They’re entirely free of allergy causing rubber proteins and are hand to hand reversible for greater convenience. These gloves are also CFIA and FDA compliant.
Product ID: STAGBPU
Black knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
Product ID: S18TAGOFN
Highly visible cut-resistant gloves that block static
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.
Product ID: S18TAGGFN
Static blocking hi-viz gloves that offer cut protection and a strong grip
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice for working with sensitive electronics.
Product ID: S18TAFGPU
High dexterity, cut-resistant gloves with enhanced comfort and a strong grip
These 18-gauge knit gloves feature a polyurethane coating that enhances dexterity and a bare-hand feel while also providing a strong and comfortable grip. Their naturally cool TenActiv™ yarn prevents hands from overheating while offering ANSI Level A4 cut protection. These gloves are an outstanding choice for jobs that require working with small parts where a strong grip is required.
Product ID: S18TAFGNT
Cut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
Product ID: S18TAFGFN
Ultra-thin and versatile cut-resistant gloves for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
Product ID: S13TAFNT
Long-lasting cut-resistant gloves with a strong grip
These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and have been treated with an active agent to achieve a 99.9% antimicrobial status
Product ID: S13FRNE
Arc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
Product ID: SPGC2D
360° cut protection combined with a strong, steady grip
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
Product ID: SPGC
360° cut protection matched with comfort and dexterity
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
Product ID: SPFGSS
High level heat resistance that doesn’t compromise on comfort
These gloves are made from a polyester and composite fiber blend that provides ANSI Level 5 heat resistance without sacrificing dexterity. Strategically placed silicone strips at the palms increase their lifespan, while an ergonomic shape conforms to the hands’ natural contours, ensuring a high level of comfort.