Show Filters

FILTER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
FILTER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • TenActiv™ S21TAXGFN

    Product ID: S21TAXGFN

    Hi-viz cut protection with high dexterity for light material handling

    Our TenActiv™ S21TAXGFN gloves are cut resistant and ultra-thin for tasks that require improved hand movement and protection from cut hazards. Ideal for light material handling, assembly, and construction work, their hi-viz color increases visibility while a foam nitrile palm coating offers steady wet grip.

  • TenActiv™ STXPNRVB

    Product ID: STXPNRVB

    Extreme cut protection with hi-viz impact resistance plus steady wet grip

    Our TenActiv™ STXPNRVB gloves protect against extreme cut hazards and impacts plus steady wet grip. Made with TenActiv™ engineered yarn for 360° cut protection with ANSI A7 cut resistance, their hi-viz back-of-hand ANSI 2 impact protection guards against knocks and bumps while providing better hand placement awareness and worker visibility on the job. Micropore nitrile palm coating offers steady wet grip, plus a reinforced thumb crotch protects against wear and tear when material handling.

  • Endura® 378GTXVBE

    Product ID: 378GTXVBE

    Economic choice leather driver gloves with cut and impact protection plus unpadded palms for better hand motion

    Our Endura® 378GTXVBE leather driver gloves are an economical choice for protection against cut and impact hazards. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance plus back-of-hand ANSI 2 impact protection guards against knocks and bumps. Unpadded palms offer a better sense of feel and firmer grip when performing tasks.

  • Endura® 378GTXVBG

    Product ID: 378GTXVBG

    Hi-viz cut protection with impact resistance and unpadded palms for better visibility and hand motion

    Our Endura® 378GTXVBG gauntlet gloves offer protection against cut and impact hazards plus retro-reflective stripes for visibility. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance plus back-of-hand ANSI 2 impact protection guards against knocks and bumps. These gloves are treated to resist water and liquids and hi-viz gauntlet cuffs offer high visibility and added safety.

  • Dexterity® S15GPNVB

    Product ID: S15GPNVB

    Thin gloves with cut and impact protection plus micropore nitrile palm coating for steady wet grip

    Our Dexterity® S15GPNVB gloves offer cut resistance and impact protection plus a micropore nitrile palm coating for better wet grip. They provide 360° of cut protection with ANSI A5 cut resistance plus back-of-hand ANSI 2 impact protection against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.

  • TenActiv™ STAGBLPVB

    Product ID: STAGBLPVB

    Ergonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance

    Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.

  • TenActiv™ S13TAXFN

    Product ID: S13TAXFN

    Thin cut protection for better hand mobility plus steady wet grip when handling lightly oiled parts

    Our cut-resistant TenActiv™ S13TAXFN gloves are thin for hand mobility and offer a steady wet grip. TenActiv™ engineered yarn material provides 360° cut protection with high ANSI A5 cut resistance while foam nitrile palm coating offers steady wet grip when handling lightly oiled parts. Ideal for metal fabrication and sheet metal handling tasks.

  • Dexterity® S13FRNE

    Product ID: S13FRNE

    Arc flash-rated cut protection for better dexterity plus neoprene palm coating for grip

    Our arc flash-rated Dexterity® S13FRNE gloves offer protection against cut hazards and unfinished edges. Arc flash-rated level 2 with an ATPV of 11 cal / cm², they’re made from ParaActiv™ engineered yarn to provide 360° cut protection with ANSI A4 cut resistance. These gloves also feature neoprene palm coating material that is known to resist flame for steady grip.

  • TenActiv™ STAGXPU

    Product ID: STAGXPU

    Cut-resistant low-linting knit with non-marring dry grip to prevent contamination

    Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A6 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.

  • Endura® 505KGWS

    Product ID: 505KGWS

    Heat-resistant stick welding gloves with cut resistance plus extended gauntlet cuffs for forearm material handling and protection

    Our Endura® 505KGWS stick welding gloves offer heat and cut protection, plus extended gauntlet cuffs guards against both welding hazards and sharp edges when material handling. ParaActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection. Sewing thread is also made with ParaActiv™ engineered fiber for added seam integrity. They feature reinforced thumb patches for extra durability, plus extended gauntlet cuffs provide forearm protection against sparks, heat, and abrasion.

  • Endura® 399GKGL5

    Product ID: 399GKGL5

    All-round fabrication and MIG welding gloves with arc flash protection

    Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 4 with an ATPV of 41 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.

  • Endura® 375CSI

    Product ID: 375CSI

    Economic choice unlined gloves with grain leather palms for added dexterity, durability, and sense of feel

    Our economic choice Endura® 375CSI leather gloves are unlined to provide a better sense of feel and hand motion. Cow grain leather palms improve durability and naturally resist liquids, while gauntlet cuffs provide extra wrist safety and allows for easier donning and removal.

  • Endura® 398KGLBG

    Product ID: 398KGLBG

    Heat-resistant MIG welding gloves with cut resistance and extended cuffs for protection against sparks

    Our heat-resistant Endura® 398KGLBG MIG welding gloves feature extended cuffs to protect workers from sparks and offer cut resistance for handling material. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance while back-of-hand fleece lining offers ANSI 2 heat resistance. Dark coloring hides dirt and stains for a longer wear life, plus extended 6-inch cuffs offer added wrist and forearm protection. Padded palm patches offer further comfort when material handling.

  • Endura® 378GKTFG

    Product ID: 378GKTFG

    Durable arc flash-rated gloves with high cut protection for longer wear life

    Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.

No products in your box.