-
Endura® 399GKGL5KW
Product ID: 399GKGL5KWHeat-resistant cut protection with easy pull tab knit cuffs to guard against sparks and slag for welding and all-round fabrication
Our heat-resistant Endura® 399GKGL5KW leather gloves offer cut protection with knit cuffs to prevent sparks and slag from entering the glove, plus a leather pull tab for easy donning and removal. Ideal for welding and fabrication work, their extended leather design provides wrist and forearm protection while the snug, engineered knit yarn cuffs lock out debris that can slip past standard cuffs. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and ANSI 3 heat resistance.
-
Endura® 378WGKTFG
Product ID: 378WGKTFGSlim-fit arc flash-rated gloves for better comfort with high cut protection for longer wear life
Our Endura® 378WGKTFG gloves are designed with a slim fit for comfort and protect hands from high-energy electrical discharges. Arc flash-rated level 3 with an ATPV of 33 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.
-
Endura® 399GKGTL5
Product ID: 399GKGTL5Moderate cut resistance with extended gauntlet cuffs for cold protection down to -20°C / -4°F
Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LSlim-fit gloves for MIG welding and all-round fabrication with arc flash protection
Our Endura® 399GKGL5L gloves are designed with a slim fit for comfort and are ideal for MIG welding and all-round fabrication use. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and ANSI 3 heat protection. They are arc flash-rated level 3 with an ATPV of 36 cal / cm². Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6-inch gauntlet cuffs provide extra coverage where heat hazard exists.
-
Endura® 505ALB
Product ID: 505ALBAluminized gloves for radiant heat and spark protection during long sessions of stick welding
Our Endura® 505ALB welding gloves feature back-of-hand aluminized layer for long sessions of stick welding or other tasks that require radiant heat protection against molten materials. Sewn with ParaActiv™ fiber for added seam integrity, the back-of-hand is treated with an aluminum layer to reflect away radiant heat, ultraviolet light, molten metal, sparks, and slag. ParaActiv™ engineered yarn liner provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection.
-
Endura® 305GE
Product ID: 305GEThin TIG welding gloves with oil-resistant palms and improved dexterity for precision welding
Our Endura® 305GE gloves protect hands from heat hazards and are thinner than typical welding gloves for freedom of movement and better tactility for precision TIG welding. Made from elk leather, they offer ANSI 3 heat protection in a thinner shell for better dexterity and feel without sacrificing durability. They’re sewn with ParaActiv™ thread for added seam integrity plus the 4-inch cuffs offer additional wrist protection and feature a pull tab for easy donning. Grain leather palms help resist oil.
-
Endura® 365GC
Product ID: 365GCHigh durability MIG welding gloves with heat and spark resistance for long wear life
Our heat-resistant Endura® 365GC MIG welding gloves are outseam sewn and fully welted for durability and a long wear life. Sewn with ParaActiv™ fiber for added seam integrity, they offer ANSI 3 heat resistance while extended 5-inch gauntlet cuffs offers wrist and forearm protection against sparks and heat.
-
Endura® 505GOBFC
Product ID: 505GOBFCCrush-resistant finger protection with heat resistance for MIG welding
Our Endura® 505GOBFC MIG welding gloves feature crush-resistant finger caps and protect against heat hazards and hand lacerations. Offering ANSI 3 heat resistance, these gloves are treated to resist water and liquids and are ideal for heavy duty work in large welding operations.
To improve dexterity and comfort the finger cap is not included in the pinky finger.
-
Endura® 505GP
Product ID: 505GPMIG welding gloves with zoned reinforcements, balancing flexibility with protection against sparks and filler wire injuries
Our Endura® 505GP gloves feature strategically placed leather reinforcements with ANSI 5 probe puncture resistance for protection against filler wire injuries and sparks without impeding dexterity. Ideal for MIG welding, they provide ANSI A3 heat resistance while their goatskin leather construction improves dexterity and durability for a longer wear life. These gloves are treated to resist water and liquids.
-
ParaActiv™ S13CXSI
Product ID: S13CXSIHeat and cut protection with non-marring palms to resist adhesives, liquid, and won’t leave residue
Our ParaActiv™ S13CXSI cut-resistant gloves are non-marring and offer protection against adhesives, liquid, and heat. ParaActiv™ engineered yarn material provides 360° cut protection with high ANSI A6 cut resistance and ANSI 3 heat protection. Maximum ANSI 6 abrasion resistance offers protection and long wear life plus their non-marring silicone palm coating provides liquid and adhesive resistance.
-
Dexterity® S13NSI
Product ID: S13NSIAdhesive and heat-resistant non-marring gloves for steady grip and durability
Our Dexterity® S13NSI gloves are non-marring and offer protection against adhesives, liquid, and heat. These gloves offer ANSI 3 heat protection and feature non-marring silicone palm coating for liquid and adhesive resistance. Maximum ANSI 6 abrasion resistance offers protection and long wear life making them ideal for handling hot material.
-
Endura® 398GDP
Product ID: 398GDPHeat-resistant split leather gloves with layered grain leather palms for longer wear life and liquid resistance
Our Endura® 398GDP split leather gloves protect workers’ hands against heat hazards and feature a double-layered grain leather palms for added durability. The grain leather palms are stitched with ParaActiv™ fiber throughout the plam to adhere better to split leather which improves integrity. These gloves provide ANSI 3 heat resistance and the goatskin grain palms offers natural abrasion and comfort that resists water and liquids.
-
Contender™ KFGCM
Product ID: KFGCMHeat-resistant sleeves with high cut protection for work in hot conditions
Our heat-resistant Contender™ KFGCM sleeves combine cut protection with comfort when working with hot materials. ParaActiv™ engineered yarn liner for 360° cut protection with ANSI A6 cut resistance plus ANSI 3 heat protection and lined with moisture-wicking Coolmax® to keep arms dry and cool. Elasticized biceps eliminate sliding or slipping to guarantee a snug, reliable fit.
Available in a tubular or tapered fit, with or without thumbholes, in a variety of sizes that range from 12 inches to 22 inches -
Contender™ KPXT
Product ID: KPXTTapered sleeves for better fit designed to resist flame and sparks plus incidental cut hazards
Our Contender™ KPXW tapered sleeves protect against incidental cut hazards with a high risk of exposure to sparks or flames. They provide 360° cut protection with low ANSI A2 cut resistance and are made from BlazeActiv™ fiber that meets ASTM D6413 standards to resists burns, melting, and dripping when exposed to flame. These sleeves features an elastic grip at the bicep and are tapered for a snug fit, ensuring they remain securely in place.
Available with or without thumbholes, in a variety of sizes that range from 14 inches to 22 inches in length. -
Endura® 398OBPB
Product ID: 398OBPBMIG welding gloves with zoned hypodermic protection on thumb and index finger to guard against tungsten welding wire injuries
Our Endura® 398OBPB MIG welding gloves feature double-layered maximum ANSI 5 hypodermic puncture protection on the thumb and index finger on the off-hand to guard against common welding wire injuries. The off-hand glove also features a single-layer palm liner for additional ANSI 3 hypodermic puncture protection. Both off-hand and tool-hand gloves are lined with ParaActiv™ engineered yarn for 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection. Sewn with ParaActiv™ thread for added seam integrity and treated to resist water and liquids, these gloves feature padded palms and cuffs for comfort and protection when welding. Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) off-hand versions.
-
Chemstop™ NE246FFL
Product ID: NE246FFLHeat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks
Our Chemstop™ NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.
-
Chemstop™ NE240TKL
Product ID: NE240TKLHeat-resistant 16-inch chemical gloves for protection against caustics in maintenance tasks
Our Chemstop™ NE240TKL gloves are 16 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A cotton liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Long-length gloves provide extra forearm coverage and diamond-grip textured palms offer steady grip.
-
Contender™ SBKG
Product ID: SBKGBlack knit cut protection that hides dirt and stains for longer wear life
Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding gloves with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 4 with an ATPV of 41 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 375KGTVB
Product ID: 375KGTVBArc flash-rated cold protection with cut and impact resistance that keep hands warm down to -10°C / 14°F
Our arc flash-rated Endura® 375KGTVB gloves offer cut resistance along with warm insulation to protect against temperatures down to -10°C / 14°F. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance plus arc flash level 3 protection with an ATPV of 25 cal / cm². Back of hand ANSI 2 impact protection guards against knocks and bumps. They feature a Thinsulate™ liner for warmth and comfort and are treated to resist water and liquids. Extended gauntlet cuffs provide extra wrist and forearm protection.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine-touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
ParaActiv™ SKWCPLP
Product ID: SKWCPLPHeat protection knit with cut resistance and leather palms for comfort and durability when handling hot material
Our ParaActiv™ SKWCPLP string knit gloves feature leather palms and protect hands from heat and cut hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A8 cut resistance and ANSI 3 heat protection. Leather palms offer improved durability and comfort, making them ideal for handling heavy metal parts and other hot objects.
-
Chemstop™ S15KGVNVB
Product ID: S15KGVNVBHi-viz chemical gloves with cut protection and impact resistance
Our Chemstop™ S15KGVNVB PVC chemical gloves feature hi-viz impact-resistant bumpers for back-of-hand protection and a ParaActiv™ engineered yarn liner with high ANSI A5 cut resistance. The nitrile hand coating offers steady wet grip, while the gauntlet cuffs provide extra wrist safety. Tested in accordance with EN ISO 374-1:2016 for resistance to: n-Heptane, Methanol, Sodium hydroxide (40%), Sulphuric acid (96%).
-
Endura® 378GOBKL
Product ID: 378GOBKLArc flash-rated for non-energized work plus cut protection and liquid resistance
Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 41 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A4 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
Close
