Endura® 378GOBTX – HOLD quality issues –Product ID: 378GOBTX
Goatskin driver gloves with short cuffs that resists oil and water, along with a maximum cut liner
Our Endura® 378GOBTX goatskin driver gloves are treated with Oilbloc™ to resist oil and water, as well as short cuffs and ANSI Cut Level A9 TenActiv liner. The short cuffs are a safety cuff and the seamless knit liner ensures a more soft, cooler, and comfortable fit. The goatskin leather provides more dexterity and durability. Ideal for working in high cut hazard conditions where oil and water resistance is needed.
Endura® 378SBProduct ID: 378SB
General purpose gloves with cowgrain palms and split leather back to balance durability and flexibility
Our Endura® 378SB gloves feature cowgrain palms for durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The wing style thumb design, split leather back of hand, and elasticized wrists offer flexibility and a snug fit for all day comfort.
Endura® 370DTIGLProduct ID: 370DTIGL
TIG welding gloves designed for a lady's hands for better fit and protection
Deer skin TIG welding gloves sized for ladies are designed with a cushioned patch on the pinky side to improve longevity and comfort while welding, and sewn with DuPont™ Kevlar® fiber to reduce the likelihood of getting burnt out when exposed to heat. The deer skin leather provides a high combination of durability, dexterity and a fine sense of touch without forfeighting flexibility.
Endura® 398KGLBGLProduct ID: 398KGLBGL
MIG welding gloves designed for a lady's hands for better fit and protection
Our Endura® 398KGLBGL MIG welding gloves are designed to protect against heat and cuts and fitted for a lady’s hands. They feature 6″ gauntlet cuffs for added forearm protection while the cushioned wrists increase comfort when welding for extended periods. Padded cowgrain palms offer additional comfort when material handling and back-of-hand fleece lining provides ANSI 2 heat resistance.
Vibrastop® VIBGHFVProduct ID: VIBGHFV
Vibration protection with open fingers for high touch sensitivity
Our Vibrastop™ VIBGHFV gloves feature an open finger design with leather palms that contain engineered vibration dampening material. The open fingers provide the highest level of touch sensitivity while the palms protect against vibrations from repetitive impact. Adjustable straps support the wrist, offering a snug fit and comfort.
Endura® 685BFIProduct ID: 685BFI
Aluminized gloves for long sessions of stick welding
Our Endura® 685BFI gloves feature reflective foam lining that protects against radiant heat and sparks with ANSI 4 heat protection. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
Endura® 378TXTVBProduct ID: 378TXTVB
Winter gloves with high cut resistance, cushioned palms for material handling, and warmth down to -25°C / -13°F
Our Endura® 378TXTVB gloves include reinforced back-of-hand protection and a TenActiv™ liner for high, ANSI A6 cut resistance with 360° cut protection. These water / oil-resistant driver style gloves feature a padded palm that helps dull vibrations and cushions hands when handling heavy parts, while the comfortable liner keeps hands warm down to -25°C / -13°F.
Sure Knit™ SRWLPProduct ID: SRWLP
Fire resistant wool gloves with leather palm for cold temperatures
Our Sure Knit™ SRWLP gloves is designed with a cowhide leather palm for better grip and stringknit wool that is naturally fire resistant, breatheable yet insulated and great for outdoor winter work. The leather palm is also good for material handling, general labour and site clean up.
Endura® 304TXTLProduct ID: 304TXTL
Keep hands safe from cuts and cold with protection down to -35°C / -31°F
Our Endura® 304TXTL slip-on mitts feature a cut-resistant TenActiv™ liner to protect against sharp objects and keep hands warm down to temperatures of -35°C / -31°F. Their elasticized wrists and faux fur cuffs block out cold to retain warmth in frigid conditions while a pair of plastic clips ensures they won’t be separated in storage.
Endura® CG0SKTProduct ID: CG0SKT
Cover gloves for Class 0 / Class 00 low voltage gloves
Our Endura® CG0SKT cover gloves are tailored to fit over our Line Pro NR0 Class 0 and NR00 Class 00 low voltage rubber gloves for work with energized equipment. Their keystone thumb design maximizes durability and dexterity, while an adjustable nylon black strap provides a snug fit when worn with rubber liner gloves.
Endura® CG1SSProduct ID: CG1SS
Cover gloves for Class 1 medium voltage gloves
Our Endura® CG1SS cover gloves are tailored to fit over our Line Pro NR1BR36 Class 1 medium voltage rubber gloves for work with energized equipment. Their keystone thumb design maximizes durability and dexterity, while an adjustable nylon black strap provides a snug fit when worn with rubber liner gloves.
Endura® 76BNGProduct ID: 76BNG
Fitter-style gloves that defend against nail gun injuries
Our Endura® 76BNG fitter style gloves feature strategically placed ballistic plating to protect against nail gun misfires and malfunctions. Palms, fingertips, and knuckles are reinforced with leather for durability while a safety cuff allows workers to don and remove the gloves with ease. Available in left-hand (Endura® 76BNGLH) and right-hand (Endura® 76BNGRH) versions.
Endura® 399GTXTL5Product ID: 399GTXTL5
High cut protection with extended gauntlet cuffs and protection from cold down to -10°C / 14°F
Our Endura® 399GTXTL5 gloves feature a TenActiv™ liner that provides 360° cut protection with ANSI Level A6 cut resistance. They keep hands warm in temperatures down -10°C / 14°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
Endura® 505ALBProduct ID: 505ALB
Aluminized gloves for long sessions of stick welding
Featuring a back-of-hand aluminized layer, our Endura®️ 505ALB gloves protect against radiant heat, ultraviolet light, molten metal, sparks, and splash. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
Endura® 398HG6Product ID: 398HG6
Durability and comfort for all day outdoor work
Our Endura® 398HG6 are made from a hybrid of leathers to optimize each hide’s best quality and improve glove performance. Designed for abrasive outdoor work, they feature long lasting horse leather palms for durability while supple goat grain back of hand and hairsheep fourchettes add flexibility and comfort for all day wear. Tough 6” cowgrain gauntlet cuffs provide extra protection for wrists and forearms.
Endura® 398HG2Product ID: 398HG2
Durability and comfort for all day outdoor work
Our Endura® 398HG2 are made from a hybrid of leathers to optimize each hide’s best quality and improve glove performance. Designed for abrasive outdoor work, they feature long lasting horse leather palms for durability while supple goat grain back of hand and hairsheep fourchettes add flexibility and comfort for all day wear. Tough 2” cowgrain cuffs provide wrist protection and makes them easy to don and remove.
Endura® 399OBGKG5Product ID: 399OBGKG5
Extended gauntlet metal fabrication driver gloves with water and oil resistance
Our Endura® 399OBGKG5 drivers gloves use durable goatskin treated with Oilbloc™ to resist oil and water. An all-round metal fabrication shop glove, it features wing thumbs to provide extra durability while 6″ gauntlet cuffs ensure added arm protection. The lining is cut-and-sewn for a comfortable fit that won’t bunch and is made with DuPont™ Kevlar® fiber for 360° cut protection with ANSI Level A4 cut resistance.
Endura® 305GEProduct ID: 305GE
Oil resistant TIG welding gloves with improved dexterity and grip
Our Endura® 305GE TIG welding gloves provide heat resistance in temperatures up to 200°C / 392°F while resisting stains and oil for additional grip. The elk leather construction provides a thinner shell for better dexterity and hand-feel that won’t sacrifice durability. 4” cuffs feature a pull tab for easy donning while sewing thread made with DuPont™ Kevlar® fiber is used throughout for added seam integrity against sparks.
Endura® 505MARSProduct ID: 505MARS
Our Endura 505MARS gloves are designed for all-day comfort with heat and flame protection. Made from durable, specially treated cow leather, its fire-resistant foam and aluminized back add heat and flame protection for resistance to slag, sparks, and ambient heat during extended periods of stick welding.
Endura® 335DBPProduct ID: 335DBP
High touch sensitivity and dexterity for precise TIG welding
Our Endura® 335DBP gloves offer more touch sensitivity and dexterity for TIG welders who need more exactness. The durable elk palm material affords a thinner shell and high touch sensitivity for precision TIG welding that doesn’t sacrifice durability. A split-leather back helps protect heat while remaining dexterous, ensuring extra protection from heat and sparks.
Endura® 365GCProduct ID: 365GC
Durable MIG welding gloves that resist heat to 200°C / 392°F
Our durable Endura® 365GC MIG welding gloves provide heat resistance in temperatures up to 200°C / 392°F while the grain leather cowhide resists stains and oil for additional flame protection. Outseam sewn and fully welted for additional comfort, the sewing thread is made with DuPont™ Kevlar® fiber for extra seam integrity, increasing resistance to sparks and a longer lasting wear life.
Endura® 378GTXVBGProduct ID: 378GTXVBG
Dexterous hi-viz gauntlet gloves for cut protection and visibility
Endura® 378GXTVBG gloves feature a blended composite filament lining that offers 360° cut protection with ANSI Level A5 cut resistance. These gauntlet style gloves feature hi-viz striping on the cuff and are unpadded for a better hand feel and wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails in oil and gas. The reinforced back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.
Endura® 505GOBFCProduct ID: 505GOBFC
Heat-resistant MIG welding gloves with crush-resistant finger caps
Our Endura® 505GOBFC MIG welding gloves are designed for heavy duty work in large welding operations. Featuring crush-resistant finger caps, they safeguard fingertips from crush, impact, and cut hazards while still allowing for flexibility and movement. The water/oil resistant shell provides a ANSI level 3 heat rating with protection up to 200°C / 392°F and thread made with DuPont™ Kevlar® fiber adds seam integrity.
Clutch Gear® MXPGProduct ID: MXPG
Slim, flexible mechanic gloves with moderate cut protection
Thanks to a laminated spandex backing and leather palms, our slim profile Clutch Gear® MXPG mechanic gloves combine durability with improved hand movement and feeling. Leather wraps around the thumb and forefinger to reduce wear in traditional high stress wear areas while wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable.
Note: Sizes 3XL & 4XL are made to order