Show Filters

FILTER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
FILTER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Chemstop™ NIF3018

    Product ID: NIF3018

    Chemical-resistant gloves with flock lining for comfort plus extended forearm protection

    Our Chemstop™ NIF3018 chemical gloves offer a cool, comfortable feel and extended forearm protection. These 15 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 12-inch length provides extra forearm coverage and are cotton flock-lined to absorb sweat. An embossed finish offers steady grip that’s FDA and CFIA-compliant for safe food handling.

  • Chemstop™ NI4622

    Product ID: NI4622

    Chemical-resistant 22-inch gloves for extended arm coverage

    Our Chemstop™ NI4622 gloves are 22 inches long and offer chemical resistance with extended protection for more arm coverage. These 22 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 22-inch length provides extra arm coverage, and a textured palm finish offers steady grip that’s CFIA-compliant for safe food handling.

  • Chemstop™ NI3012

    Product ID: NI3012

    Chemical-resistant 12-inch gloves with forearm coverage

    Our Chemstop™ NIF3012 gloves are 12 inches long and offer chemical resistance with extended forearm protection. These 12 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 12-inch length provides extra forearm coverage and a textured palm finish offers steady grip that’s CFIA-compliant for safe food handling.

  • Chemstop™ NE250TRC

    Product ID: NE250TRC

    Heat-resistant 20-inch chemical gloves with rubber cuff extension for protection against caustics in maintenance tasks

    Our Chemstop™ NE250TRC gloves are 20 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. An acrylic liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves with additional rubber cuff extension provide extra arm coverage and a diamond-grip textured palms offer steady grip.

  • Clutch Gear® MXVSBPB

    Product ID: MXVSBPB

    Hypodermic puncture resistance plus protection from cut and impact hazards

    Our hi-viz Clutch Gear® MXVSBPB mechanics style gloves protect against hypodermic punctures as well as cut and impact hazards. Palm lining provides ANSI 2 hypodermic puncture protection and ANSI A4 cut resistance from needlestick hazards. Hi-viz back-of-hand ANSI 1 impact protection guards against knocks and bumps and offers worker visibility. Palm and fingertip patches add durability and grip, while the reinforced thumb crotch improves overall lifespan and protects against wear and tear.

  • Clutch Gear® MXVSB

    Product ID: MXVSB

    Impact-resistant hi-viz mechanics style gloves for small parts handling

    Our hi-viz Clutch Gear® MXVSB gloves offer back of hand ANSI 2 impact resistance that won’t sacrifice dexterity. Strategically placed patches on the palm and fingertips provide better grip and durability. Reinforced thumb crotches increase wear resistance in critical areas. The adjustable hook and loop wrist closure to provide a snug and comfortable fit while adding an extra layer of protection.

  • Clutch Gear® MXGKGHVTL

    Product ID: MXGKGHVTL

    Hi-viz mechanics style protection against cuts and cold temperatures down to -20°C / -4°F

    Our hi-viz Clutch Gear® MXGKGHVTL gloves feature cut protection and cold resistance down to -20°C / -4°F without compromising dexterity and range of motion. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance. Leather wrapped fingertips and goat-skin palms provide improved durability.

  • Superior® MMG

    Product ID: MMG

    Metal chainmail food safe gloves with maximum cut resistance

    Our food safe Superior® MMG chainmail gloves offers maximum cut protection for food handling. Seamless stainless-steel chainmail is corrosion resistant and provides 360° cut protection with ANSI A9 cut resistance. The gloves feature rubberized anti-bacterial wrist closures for a comfortable fit that prevent fats and oils from seeping in. Wear over food-safe gloves for maximum comfort and protection.

  • Superior® ML80K

    Product ID: ML80K

    Reversible low-lint inspection gloves

    Our Superior® ML80 reversible inspection gloves feature a cotton blend that is low-linting to avoid shedding material and contamination. They are reversible for ease of use and CFIA-compliant for safe food handling, making them ideal for assembly tasks and inspection lines. They can be worn as a liner under other safety gloves for extra warmth.

  • Chemstop™ L6043

    Product ID: L6043

    Shoulder-length rubber gloves with chemical and liquid resistance for maintenance cleaning

    Our Chemstop™ L6043 natural rubber gloves offer shoulder-length protection from chemicals and caustic substances. Ideal for maintenance cleaning tasks, their extended 24-inch length provides full arm protection with 7.5-inch diameter cuffs allow for easy donning and removal.

  • Chemstop™ F294SL

    Product ID: F294SL

    Chemical-resistant gloves with stay-in-place sleeves for full length arm protection

    Our Chemstop™ F294SL gloves offer chemical resistance and stay-in-place sleeves for full-length arm protection. Their double-dipped palms provide extra resistance to chemicals and solvents, and a flock-lined PVC material ensures they’re stiff enough to stay in place. Wide elastic straps that wrap around the neck further ensure the sleeves stay put. They also protect against oils, grease, acid, caustics, solvents, detergents, oxidation, and water.

  • KeepKleen® BOOTPD18

    Product ID: BOOTPD18

    Extended coverage single-use boot covers that guard against contamination

    These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.

  • Superior® ADBP3828

    Product ID: ADBP3828

    Durable, 4-pocket denim apron with convenient tool storage

    This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.

  • Superior® A8BV4835

    Product ID: A8BV4835

    Easy-cleaning apron that is food safe and resists chemicals, detergents, and oils

    Our Superior® A8BV4835 food safe vinyl apron is easy to clean and offers resistance to chemicals, oils, detergents, and fats. Its reinforced grommets enhance durability, and the plain edges allow easy cleaning. CFIA-compliant for safe food handling and offers a secure fit with fasteners around the neck and back to hold the apron in place.

  • Endura® 505BUWS

    Product ID: 505BUWS

    Stick welding gloves with heat protection and cotton lining for comfort plus extended gauntlet cuffs

    Our Endura® 505BUWS stick welding gloves feature a cotton liner for heat protection and comfort, plus extended gauntlet cuffs to protect wrists from welding hazards. These gloves are fully lined to offer ANSI 3 heat resistance while the cotton liner absorbs sweat and reduces heat transfer for more comfort during long welding sessions. The sewing thread is made with ParaActiv™ fiber for added seam integrity. They feature reinforced thumb patches for extra durability, plus extended gauntlet cuffs offer forearm protection against sparks, heat, and abrasion.

  • Endura® 378GKGDT

    Product ID: 378GKGDT

    General use protection against cuts plus cold protection down to -20°C / -4°F

    Our Endura® 378GKGDT gloves keep hands warm down to -20°C / -4°F and offer cut protection plus oil resistance. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. Keystone thumb design helps improve durability without impeding dexterity, making it suitable for material handling.

  • Endura® 378GHVTL

    Product ID: 378GHVTL

    Hi-viz extreme cold protection with durable leather palms and retroreflective stripes

    Our green hi-viz Endura® 378GHVTL gloves protect against extreme cold temperatures with Thinsulate™ lining to keep hands warm down to -30°C / -22°F. The back-of-hand material offers flexibility and comfort plus features retroreflective striping for hand placement awareness and worker visibility on the job. Goatskin leather palms help improve dexterity and durability for a longer wear life.

  • Endura® 378GAX

    Product ID: 378GAX

    General use gloves with flexible fabric backs and leather palms to balance breathability and durability

    Our Endura® 378GAX breathable general use gloves balance abrasion resistance on the palms with flexible fabric back for comfort and improved hand mobility. Goatskin leather palms offer exceptional durability for a longer wear life while flexible back-of-hand synthetic material provides better dexterity and breathability.

  • SnowForce™ SNOWD200L

    Product ID: SNOWD200L

    Gauntlet cuff mitts with removable lining for extreme cold temperatures

    Our Endura® SNOWD200L cold-rated mitts provide a comfortable fit with removable lining that offers extreme cold protection from the elements. Fleece lining offers warmth in cold temperatures down to -45°C / -49°F and can be removed for easy cleaning and drying. Adjustable wrist closures and extra-wide gauntlet cuffs are designed to fit over thick jackets and lock in warmth. Made from calfskin leather for improved dexterity and longer wear life, they’re ideal for comfortable long-periods of outdoor usage.

  • Action™ SKLP

    Product ID: SKLP

    Knit with leather palms for comfort and durability that protect against cuts and punctures when material handling

    Our Action™ SKLP string knit gloves feature leather palms for durable protection against cut and puncture hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance. Leather palms offer maximum ANSI 5 puncture resistance and helps improve durability and comfort. Ideal for handling heavy metal parts and other sharp objects.

  • Vibrastop™ VIBGV

    Product ID: VIBGV

    Vibration-dampening gloves with leather palms for durability and protection against high-frequency hazards

    Our Vibrastop™ VIBGV gloves are designed to offer protection against high-frequency vibration hazards. Made with vibration-dampening material, they feature an orange back-of-hand material for better flexibility and comfort, while their leather palms offer improved durability for a longer wear life. An adjustable wrist strap provides a snug fit for comfort.

  • Sure Knit™ STN336K

    Product ID: STN336K

    Versatile, high dexterity inspection gloves

    These inspector gloves are made from a soft, flexible nylon that provides a high level of dexterity and is non-linting. An ambidextrous design increases their versatility, and they’re washable for a fast and easy refresh. Wear them on their own or use them as comfortable liners underneath disposable gloves.

  • Sure Knit™ SQ

    Product ID: SQ

    General use knit made with biodegradable and recycled materials for food processing and maintenance tasks

    Our Sure Grip® SQ general use gloves are made with biodegrable and recycled materials for food processing and general maintenance tasks. Their cotton / polyester blend provides cool and comfortable all-day wear and they’re CFIA-compliant for safe food handling.

  • Endura® SPL4

    Product ID: SPL4

    Welder's spats that protect against sparks and heat

    Our Endura® SPL4 welder’s spats protect feet and shins from sparks and heat. They feature a wide elastic sole strap with an closure for a quick, easy fit. An extended 6.5-inch height offers added protection and they’re sewn with ParaActiv™ fiber for added seam integrity.

No products in your box.