-
SUPERA™ WCKVFR
Product ID: WCKVFRNon-irritating fire-resistant watch cap for protection against fire hazards
Our SUPERA™ NWKVFR watch cap is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this watch cap is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ NWKVFR
Product ID: NWKVFRNon-irritating fire-resistant neck warmer for protection against fire hazards
Our SUPERA™ NWKVFR neck warmer is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this neck warmer is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc flash-rated cut protection for better dexterity plus neoprene palm coating for grip
Our arc flash-rated Dexterity® S13FRNE gloves offer protection against cut hazards and unfinished edges. Arc flash-rated level 2 with an ATPV of 11 cal / cm², they’re made from ParaActiv™ engineered yarn to provide 360° cut protection with ANSI A4 cut resistance. These gloves also feature neoprene palm coating material that is known to resist flame for steady grip.
-
Sure Knit™ S13FRT
Product ID: S13FRTHeat-resistant general use gloves made with material known to resist flame
Our Sure Knit™ S13FRT general use gloves provide protection against heat and tasks with a high risk of exposure to sparks or flames. They are made from Protex® fiber that is known to resists burns, melting, and dripping when exposed to flame. Can be worn on their own or as liners for added protection.
-
Chemstop™ N9B
Product ID: N9BHeavy-duty gloves that protect against oil and grease plus cotton lining for comfort
Our Chemstop™ N9B heavy-duty gloves provide comfortable protection against oil and grease. Fully coated in nitrile with cotton lining for comfort and sweat absorption, they protect hands from grease and other organic solvents.
-
Clutch Gear® MXGKGHVB
Product ID: MXGKGHVBHi-viz mechanics style with leather palms plus high cut resistance and impact protection for hand placement and worker visibility
Our Clutch Gear® MXGKGHVB cut protection offers impact resistance in a hi-viz green color for better worker visibility and hand placement. TenActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance. Hi-viz back-of-hand bumpers offer ANSI 2 impact protection to guard against knocks and bumps, and the green hi-viz back-of-hand knit adds flexibility and comfort. The leather palms add durability for a longer wear life.
-
TenActiv™ STAGPNVPI
Product ID: STAGPNVPIVibration-dampening gloves with protection against cut hazards
Our TenActiv™ STAGPNVPI cut resistance offers vibration-dampening padding for protection against vibration hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while their micropore nitrile palm coating offers steady wet grip.
-
Dexterity® SKG/PXNE
Product ID: SKG/PXNEArc flash-rated cold protection for dexterous flash fire resistance plus cut and heat protection
Our arc flash-rated Dexterity® SKG/PXNE gloves provide heat and cut resistance where flash fire hazards are present plus warmth down to -5°C / 23°F. Made with ParaActiv™ engineered yarn for 360° cut protection with ANSI A5 cut resistance and ANSI 4 heat protection, these gloves are arc flash-rated level 3 with an ATPV of 25 cal / cm² and feature neoprene palm coating known to resist flame for steady grip.
-
Endura® 378KMT4P
Product ID: 378KMT4PPremium multi-hazard cold and water protection with flexible maximum impact resistance for better hand mobility plus cut protection
Our waterproof Endura® 378KMT4P leather gloves offer cut and impact resistance along with added insulation for cold protection down to -30°C / -22°F. The unique membrane lamination prevents layers from slipping, providing a comfortable fit and reliable grip, plus compression resistant insulation in the fingertips for better cold resistance when handling cold objects. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance and 4PRO™ back-of-hand protection with maximum ANSI A3 impact resistance that remains flexible. Leather is also treated to resist water and liquids along plus padded palms offer comfort when material handling.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and liquid resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 378GOBBFC
Product ID: 378GOBBFCCrush-resistant finger protection with cut and impact resistance
Our Endura® 378GOBBFC driver gloves feature crush-resistant finger caps to protect from impacts, cuts, punctures, and laceration hazards. ParaActiv™ engineered yarn liner provides 360° cut protection with moderate ANSI A4 cut resistance and back-of-hand ANSI 2 impact resistance for protection against knocks and bumps. Treated to resist water and liquids, these gloves feature padded palms for comfort when material handling.
-
Endura® 378GKGVBG
Product ID: 378GKGVBGCut-resistant impact protection with padded palms for material handling plus extended cuffs for wrist safety
Our Endura® 378GKGVBG feature padded palms for comfort when material handling and offer protection against cuts and impacts . TenActiv™ engineered yarn liner provides 360° cut resistance with ANSI A6 cut protection plus back-of-hand ANSI 2 impact resistance guards against knocks and bumps. Extended gauntlet cuffs provide additional wrist safety.
-
Endura® 375KGVB
Product ID: 375KGVBModerate cut resistance and impact protection with unpadded palms for better grip and feel
Our Endura® 375KGVB protect against cut hazards and are unpadded for better grip and sense of feel. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and incidental heat protection. Back-of-hand ANSI 2 impact resistance protects against knocks and bumps. The goatskin leather helps improve dexterity and durability for a longer wear life and has been treated to resist water and liquids.
-
Endura® 375GKGVB
Product ID: 375GKGVBCut and impact protection treated to resist liquids plus gauntlet cuffs for added forearm protection
Our cut-resistant Endura® 375GKGVB gloves protect against impact hazards and are treated to resist liquids, plus their extended 6-inch cuffs provide forearm protection. ParaActiv™ engineered yarn liner offers 360° cut protection with high ANSI A5 cut resistance while back-of-hand bumpers provide ANSI 2 impact protection against knocks and bumps. Treated to resist water and liquids, these gloves feature padded palms for comfort when material handling.
-
Endura® 375KGTVB
Product ID: 375KGTVBArc flash-rated cold protection with cut and impact resistance that keep hands warm down to -10°C / 14°F
Our arc flash-rated Endura® 375KGTVB gloves offer cut resistance along with warm insulation to protect against temperatures down to -10°C / 14°F. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance plus arc flash level 3 protection with an ATPV of 25 cal / cm². Back of hand ANSI 2 impact protection guards against knocks and bumps. They feature a Thinsulate™ liner for warmth and comfort and are treated to resist water and liquids. Extended gauntlet cuffs provide extra wrist and forearm protection.
-
Endura® 365DLXFTL
Product ID: 365DLXFTLExtended cuff lineman gloves with lining that keep hands warm down to -10°C / 14°F
Our Endura® 365DLXFTL gloves feature lining for cold protection along with 6-inch cuffs with hi-viz bands for visibility and added protection. The Thinsulate™ lining keeps hands warm in cold temperatures down to -10°C / 14°F.
-
Endura® 365DLX6
Product ID: 365DLX6Lineman gloves with extended hi-viz cuffs
Our Endura® 365DLX6 lineman gloves feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear and are treated to repel water, oil, and stains.
-
Endura® 365DLX2TL
Product ID: 365DLX2TLLineman gloves with short cuffs for improved range of motion and lining that keep hands warm down to -10°C / 14°F
Our Endura® 365DLX2TL gloves feature lining for cold protection along with 2-inch cuffs with hi-viz bands for visibility and improved range of motion. The Thinsulate™ lining keeps hands warm in cold temperatures down to -10°C / 14°F.
-
Endura® 365DLX2
Product ID: 365DLX2Lineman gloves with short 2-inch hi-viz cuffs
Our Endura® 365DLX2 lineman gloves feature a shorter 2-inch cuff that won’t get in the way when working in tight spaces or wearing clothing with bulky sleeves. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These gloves are treated to repel water, oil, and stains and feature hi-viz bands on the shorter cuffs for visibility.
-
TenActiv™ STAGYPNVB
Product ID: STAGYPNVBHi-viz cut protection with impact resistance and wet grip
Our hi-viz TenActiv™ STAGYPNVB impact-resistant gloves offer cut protection and worker visibility. The TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while back-of-hand ANSI 1 impact protection guards against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and improves durability for a longer wear life. Hi-viz knit shell offers better hand placement awareness and worker visibility.
-
TenActiv™ STAFGFNVB
Product ID: STAFGFNVBModerate cut resistance with incidental impact protection and steady wet grip
Our TenActiv™ STAFGFNVB gloves protect against cut and impact hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance plus back-of-hand ANSI 1 impact resistance for protection against knocks and bumps. Foam nitrile palm coating offers steady wet grip.
-
Chemstop™ S15KGVNVB
Product ID: S15KGVNVBHi-viz chemical gloves with cut protection and impact resistance
Our Chemstop™ S15KGVNVB PVC chemical gloves feature hi-viz impact-resistant bumpers for back-of-hand protection and a ParaActiv™ engineered yarn liner with high ANSI A5 cut resistance. The nitrile hand coating offers steady wet grip, while the gauntlet cuffs provide extra wrist safety.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
