Chemstop™ NIF3018SSProduct ID: NIF3018SS
Chemical-resistant gloves that eliminate paint spray back
These 18-mil thick gloves feature a nitrile coating that makes them fully resistant to chemicals, oils, fuels and solvents, optimizing them for spray paint jobs. A conductive silver strip on the palms electrically grounds workers to spray-paint guns to eliminate spray back, and an embossed finish provides a strong, steady grip. Their 12″ length provides forearms with excellent coverage.
Chemstop™ NIF3018Product ID: NIF3018
Chemical and puncture resistant gloves that provide a wide area of protection
Thanks to a nitrile coating, these 15mil thick gloves resist a wide range of chemicals and solvents including oil, fuel and methanol. Their embossed finish provides a steady grip and flock lining ensures comfort. An extended 12″ length provides a greater zone of coverage and ANSI Level A3 puncture resistance further protects hands.
Chemstop™ NI4622Product ID: NI4622
Nitrile-treated gloves that resist chemicals in a wide range of temperatures
These gloves are made from extra-thick, 22 mil nitrile that provides outstanding protection against chemicals and solvents and feature a 19″ length to provide extra coverage against splash. They can be utilized in temperatures ranging from -4°C to 149°C (25°F – 300°F) and come with an embossed finish that allows for a steadier grip.
Chemstop™ NI3012Product ID: NI3012
Chemical resistant gloves that keep hands safe in a wide range of temperatures
These flexible gloves are made from 12 mil thick nitrile for reliable resistance to chemicals, oil, fuel and organic solvents, and feature a 12″ length for wide-ranging protection. They’re able to safely perform in temperatures ranging from -4°C to 149°C (25°F – 300°F) and have been rated with ANSI Level 2 puncture resistance. An embossed finish guarantees a steady grip.
Chemstop™ NE250TRCProduct ID: NE250TRC
Chemical resistant, extended cuff gloves that guard against heat up to 204°C / 400°F
These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.
Clutch Gear® MXVSBPBProduct ID: MXVSBPB
Dexterous gloves with superior puncture resistance and cut protection
Thanks to strategically placed thermoplastic rubber pads at the back of the hand, these mechanic gloves provide a high level of impact resistance without sacrificing mobility. Their PVC Sure Grip® palm patches ensure a strong, steady grip while protecting fingertips, and DuPont™ Kevlar® fiber reinforced thumb patches extend their lifespan. Punkban™ lining provides these gloves with ANSI Level 4 puncture resistance. These gloves are also ANSI Level A4 cut resistant.
Clutch Gear® MXVSBProduct ID: MXVSB
Dexterous, impact resisting gloves with a strong grip
These mechanic gloves match a superior level of dexterity with impact-resisting features including back-of-the-hand protection. Their Sure Grip® palm patches provide a strong, steady grip while affording extra protection to the fingertips. The reinforced thumb crotch reduces wear in critical area. Velcro cuffs ensure a comfortable and adjustable fit.
Clutch Gear® MXGKGHVTLProduct ID: MXGKGHVTL
High visibility mechanic gloves with 360° cut resistance and winter protection down to -15°C / 5°F
Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, and a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable, and C100 Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F.
Superior® MMGProduct ID: MMG
Chemical resistant chainmail gloves for extreme 360°cut resistance
A seamless chainmail construction made from stainless-steel rings provides 360° ANSI Level A9 cut protection. Aside from their powers to resist cuts, corrosion, fats and oils, the rings also provide a high level of flexibility and dexterity. The gloves can be easily cleaned in the sink and feature a bacteria-resistant wristband that reduces the risk of contamination. A convenient, hand reversible design provides ease of use. These gloves are also FDA and CFIA-compliant.
Superior® ML80KProduct ID: ML80K
Heavyweight inspector gloves with knit wrists for a close fit
Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They also benefit from knit wrists that ensure a snug fit, and stay in place while preventing debris from entering the glove.
Chemstop™ L6043Product ID: L6043
24" liquid-proof gloves that provide a high degree of chemical protection
With a total length of 24 inches, these extra-heavyweight natural rubber gloves provide a high degree of protection from chemicals and caustic substances. Their 7.5″ cuffs allow for easy on and off and they’re an excellent choice for sandblasting.
Chemstop™ F294SLProduct ID: F294SL
Stay-put chemical-resistant gloves that offer full-length arm protection
When protection from chemicals is paramount, these PVC gloves that run to the shoulder are your first line of defense. Their double-dipped palms provide extra resistance to chemicals and solvents, and a flock-lined PVC material ensures they’re stiff enough to stay in place. Wide elastic straps that wrap around the neck further ensure the sleeves stay put. Aside from chemicals, they’ll also defend from oils, grease, acid, caustics, solvents, detergents, oxidation and water.
KeepKleen® BOOTPD18Product ID: BOOTPD18
Extended coverage single-use boot covers that guard against contamination
These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.
Superior® ADBP3828Product ID: ADBP3828
Durable, 4-pocket denim apron with convenient tool storage
This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.
Superior® A8BV4835Product ID: A8BV4835
Easy-cleaning apron that resists chemicals, detergents, and oils
This apron is built from an 8mm thick vinyl that resists chemicals, detergents, oils and fats. Its reinforced grommets enhance durability, and plain edges make it easy to clean. It’s fully CFIA-compliant for safe food handling.
Endura® 505BUWSProduct ID: 505BUWS
Durable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
Endura® 378GKGDTProduct ID: 378GKGDT
360° cut resistant gloves that keep hands warm down to -20°C / -4°F
These versatile goat grain gloves benefit from ultra-warming C200 Thinsulate™ lining, which provides a double layer of insulation to guarantee warmth down to temperatures of -20°C / -4°F. At the same time, a keystone thumb ensures comfort and durability, and DuPont™ Kevlar® fiber lining provides 360° ANSI Level A5 cut resistance and ANSI Level 5 puncture resistance.
Endura® 378GHVTLProduct ID: 378GHVTL
Hi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
Endura® 378GAXProduct ID: 378GAX
Abrasion resistant driver gloves crafted with comfort in mind
Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.
Contender™ SPGRK2DProduct ID: SPGRK2D
Highly cut resistant gloves with an enhanced grip
These gloves are made from a DuPont™ Kevlar® fiber blended yarn that provides 360° ANSI Level A6 cut protection and feature a seamless knit for outstanding levels of comfort and dexterity. PVC dots at the front and back of the hand increase grip without sacrificing flexibility, and an ambidextrous design lengthens the gloves’ lifespan.
SnowForce™ SNOWD200LProduct ID: SNOWD200L
Insulated gauntlet gloves that provide winter protection down to -45°C / -49°F
Designed with arctic winters in mind, these calfskin gloves provide crucial warmth in extreme cold. Their Temperloc lining ensures winter protection in temperatures down to -45°C / -49°F and can be easily removed for cleaning and drying. Elasticized wrists lock in heat and keep cold out, and their 6.5″ double layer nylon gauntlet cuffs have been designed to slide over snowmobile suits and parkas. They even feature a removable cheek warmer and pile wiper.
Action™ SKLPProduct ID: SKLP
360° cut protection meets flame resistance
These string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester, provide 360° ANSI Level A5 cut protection and flame resistance. Their leather palms increase comfort and durability, while providing a strong, steady grip which makes these gloves an ideal choice when handling heavy metal parts and glass or sharp objects.
Dexterity® SKGPNVBProduct ID: SKGPNVB
Impact and oil-resistant gloves with 360° cut protection
These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.
Dexterity® SKFGFNVBProduct ID: SKFGFNVB
Impact and cut resistant gloves with a steady grip
These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.