Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Superior® ML80K

    Product ID: ML80K

    Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They also benefit from knit wrists that ensure a snug fit, and stay in place while preventing debris from entering the glove.

  • Chemstop™ L6043

    Product ID: L6043

    With a total length of 24 inches, these extra-heavyweight natural rubber gloves provide a high degree of protection from chemicals and caustic substances. Their 7.5″ cuffs allow for easy on and off and they’re an excellent choice for sandblasting.

  • Chemstop™ F294SL

    Product ID: F294SL

    When protection from chemicals is paramount, these PVC gloves that run to the shoulder are your first line of defense. Their double-dipped palms provide extra resistance to chemicals and solvents, and a flock-lined PVC material ensures they’re stiff enough to stay in place. Wide elastic straps that wrap around the neck further ensure the sleeves stay put. Aside from chemicals, they’ll also defend from oils, grease, acid, caustics, solvents, detergents, oxidation and water.

  • KeepKleen® BOOTPD18

    Product ID: BOOTPD18

    These single-use boot covers are made from water-resistant polyethylene to protect feet and floors from contamination. Their extra-long, 18″ height provides a wide amount of coverage, and elasticized tops ensure they stay in place through wear and tear.

  • Superior® ADBP3828

    Product ID: ADBP3828

    This lightweight but hard-wearing denim apron features a total of four pockets for seamless tool storage and access. It has a single, easy to reach chest-level pocket to hold the items you reach for most, plus three waist-level pockets for extra storage. A reinforced bar-tack increases its lifespan, and it is fully launderable for easy cleaning.

  • Superior® A8BV4835

    Product ID: A8BV4835

    This apron is built from an 8mm thick vinyl that resists chemicals, detergents, oils and fats. Its reinforced grommets enhance durability, and plain edges make it easy to clean. It’s fully CFIA-compliant for safe food handling.

  • Endura® 505BUWS

    Product ID: 505BUWS

    These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.

  • Endura® 378GKGDT

    Product ID: 378GKGDT

    These versatile goat and grain gloves benefit from ultra-warming C200 Thinsulate™ lining, which provides a double layer of insulation to guarantee warmth down to temperatures of -20°C / -4°F. At the same time, a keystone thumb ensures comfort and durability, and DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 5 puncture resistance.

  • Endura® 378GHVTL

    Product ID: 378GHVTL

    These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -15°C / 5°F . Elasticized backs make sure that the fit secure.

  • Endura® 378GAX

    Product ID: 378GAX

    Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.

  • Contender™ SPGRK2D

    Product ID: SPGRK2D

    These gloves are made from a DuPont™ Kevlar® fiber blended yarn that provides 360° ANSI Level A6 cut protection and feature a seamless knit for outstanding levels of comfort and dexterity. PVC dots at the front and back of the hand increase grip without sacrificing flexibility, and an ambidextrous design lengthens the gloves’ lifespan.

  • SnowForce™ SNOWD200L

    Product ID: SNOWD200L

    Designed with arctic winters in mind, these calfskin gloves provide crucial warmth in extreme cold. Their Temperloc lining ensures winter protection in temperatures down to -45°C / -49°F and can be easily removed for cleaning and drying. Elasticized wrists lock in heat and keep cold out, and their 6.5″ double layer nylon gauntlet cuffs have been designed to slide over snowmobile suits and parkas. They even feature a removable cheek warmer and pile wiper.

  • Action™ SKLP

    Product ID: SKLP

    These string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester, provide 360° ANSI Level A5 cut protection and flame resistance. Their leather palms increase comfort and durability, while providing a strong, steady grip which makes these gloves an ideal choice when handling heavy metal parts and glass or sharp objects.

  • Dexterity® SKGPNVB

    Product ID: SKGPNVB

    These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.

  • Dexterity® SKFGFNVB

    Product ID: SKFGFNVB

    These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.

  • Superior Touch® S13SXGPU

    Product ID: S13SXGPU

    These CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.

  • Vibrastop™ VIBGV

    Product ID: VIBGV

    Featuring 60 grams of vibration dampening polymer at the palms and a high level of dexterity, these gloves are an excellent choice when working with pneumatic tools and repetitive impact machinery. An adjustable, padded 2.5″ wrist strap offers further abrasion resistance and wrist protection.

  • Sure Knit™ STN336K

    Product ID: STN336K

    These inspector gloves are made from a soft, flexible nylon that provides a high level of dexterity and is non-linting. An ambidextrous design increases their versatility, and they’re washable for a fast and easy refresh. Wear them on their own or use them as comfortable liners underneath disposable gloves.

  • TenActiv™ STAGHVPN

    Product ID: STAGHVPN

    A stronger-than-steel TenActiv™ yarn gives these gloves ANSI Level A5 cut protection, and a hi-viz knit shell increases their visibility. A micropore nitrile coating ensures an excellent grip even on wet and oily surfaces, and a reinforced thumb crotch extends their lifespan by reducing wear in high-stress areas. They’re made touchscreen compatible so you never need to remove your gloves as you move between tasks.

  • Sure Knit™ SQ

    Product ID: SQ

    This 7-gauge string knit glove performs in a wide range of versatile applications including parts handling, general maintenance, and food processing. They can also be worn under a pair of existing gloves as a winter liner. They’re made from a comfortable cotton/polyester blend that’s cool, comfortable and easy to wash, while their 50-gram weight provides strength and durability.

  • Endura® SPL4

    Product ID: SPL4

    Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.

  • Endura® 375GTVB

    Product ID: 375GTVB

    These winter-ready driver gloves provide warmth down to temperatures of -20°C / -4°F. Tough goatskin leather treated with Oilbloc™ ensures top-notch oil resistance. They benefit from enhanced back-of-hand protection that dulls impact without impeding ease of movement, and the strategic placement of double-weight Thinsulate™ provides warmth where it’s needed most while ensuring mobility, flexibility and dexterity.

  • Endura® 365DLXTKG

    Product ID: 365DLXTKG

    These heavyweight cowgrain leather gloves benefit from DuPont™ Kevlar® fiber for 360° cut protection that meets ANSI Level A4 . The 6″ gauntlet cuffs feature two 3M™ retroreflective silver strips enhanced by high-viz bands, meeting the ANSI/ISEA 107-2015 standard for high visibility. They provide an excellent level of water, oil and stain resistance, and feature split-leather at the cuffs. They are also Thinsulate™-lined for winter protection in temperatures down to -15°C / 5°F.

  • Endura® 361DLXWL

    Product ID: 361DLXWL

    These heavy-duty mitts built from specially selected horsehide leather are wool lined for warmth in temperatures down to -45°C / -50°F. Their gauntlet cuffs are marked by retroreflective silver strips and a hi-viz overlay to assure maximum visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. A leather performance patch at the palm makes them extra-hard wearing, and a removable, washable lining makes it easy to keep them fresh and clean.