Product ID: 361DLXTKG
These cowgrain leather mitts meet the ANSI/ ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands.
They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F .
Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection
Product ID: 66BTX
Split leather fitters gloves with high cut protection, a strong grip and maximum puncture resistance
Split leather fitters gloves with a TenActiv liner for high cut resistance and a split cowhide palm and orange grip strips for superior durability and grip. The split cowhide palm offers high durability and ANSI Puncture Level 5 resistance, and the grip strips on the palms are designed to provide a better grip and reduce wear and tear. The TenActiv liner provides a soft-to-the-touch feel, comfortability and ANSI Cut Level A6 protection, making these general purpose gloves ideal for working with high cut hazards where a strong grip is needed. The exposed liner provides better dexterity and a wide range of motion.
Product ID: 678KTA
Snug-fitting, keystone thumb driver gloves for dexterity and durability
These close-fitting driver gloves are made from tough split cowhide leather with a keystone thumb for more flexibility and dexterity, without forfeiting comfort. Ideal for working in low hazard conditions.
Product ID: STXPNRPVB
Hi-viz gloves with padded palms for grip and extreme cut protection plus impact protection
Our TenActiv™ STXPNRVB feature padded palms for comfort and protection when material handling. They’re made from TenActiv™ engineered yarn to provide 360° cut protection with the industry’s highest ANSI A9 cut resistance plus back-of-hand impact protection against knocks and bumps. Designed to perform in any environment that presents a high level of cut and impact hazards, they also feature a hi-viz color for visibility and worker hand placement while micropore nitrile palms offer grip in wet conditions.
Product ID: 365DLX2TKG
Cold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs
Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.
Product ID: 361DLX6
Lineman mitts with extended hi-viz cuffs
Our Endura® 361DLX6 lineman mitts feature hi-viz 6-inch cuffs with retroreflective tape for better visibility. Made from durable leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear.
Product ID: S18TXFTLP
Zoned maximum cut resistance that protects the most vulnerable areas
Our TenActiv® S18TXFTLP gloves feature leather palm patches with the industry’s maximum cut protection. The patches are reinforced with a metal mesh to protect palms from sharp objects while the uncovered fingers and thumb allow for touch sensitivity when picking screws or nails out of belt pouches. These gloves are ideal for framers, carpenters, general construction, and other jobs that involve use of nails and screws.
Product ID: TSOKTAFG
Green hi-viz shirt with moderate cut-resistant protective sleeves
Our Superior® TSOKTAFG orange hi-viz shirts are designed to protect workers arms outdoors when high visibility is a must. They feature our TenActiv™ cut-resistant sleeves to help protect arms against accidental cuts and scrapes from materials, tools, and other hazards. The breathable design and reflective material provide compliant 360° visibility while remaining machine washable.
Product ID: 505ALB
Aluminized gloves for long sessions of stick welding
Featuring a back-of-hand aluminized layer, our Endura®️ 505ALB gloves protect against radiant heat, ultraviolet light, molten metal, sparks, and splash. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
Product ID: 305GE
Oil resistant TIG welding gloves with improved dexterity and grip
Our Endura® 305GE TIG welding gloves provide heat resistance in temperatures up to 200°C / 392°F while resisting stains and oil for additional grip. The elk leather construction provides a thinner shell for better dexterity and hand-feel that won’t sacrifice durability. 4” cuffs feature a pull tab for easy donning while sewing thread made with DuPont™ Kevlar® fiber is used throughout for added seam integrity against sparks.
Product ID: S10SXBDB
Extreme cut-resistant gloves with added protection for deboning and safe meat processing
Our SureKnit™ S10SXBDB gloves were specifically designed to protect hands during the deboning process. Offering extreme ANSI Level A8 cut resistance and 360° cut protection, they’re reinforced with strategically placed patches to provide extra safety in the areas that are most susceptible to cuts. They’re CFIA and FDA compliant, antibacterial for safe food handling, and touchscreen compatible to seamlessly move between tasks.
Product ID: 378TXTVBG
Winter gloves with multi-hazard protection for handling heavy materials and operating tools
Our multi-feature Endura® 378TXTVBG gloves combine 360° cut protection, impact resistance, and vibration-dampening palms with the warmth of Thinsulate™ to keep hands safe while fighting cold temperatures down to -25°C / -13°F. We’ve also added gauntlet cuffs for wrist and forearm protection. Designed for the oil and gas industry, these gloves provide multi-hazard protection that is ideal for handling heavy parts and materials and for operating tools.
Product ID: GSSTAP
Comfortable cut-resistant sweater for high-risk tasks
Our Superior® GSSTAP sweater provides cut resistance for the entire torso while remaining comfortable to wear. The collar and lower sleeves feature additional cut protection for neck and arms, safeguarding workers’ vulnerable areas from high-risk accidental injuries. Chest, abdomen, and upper arm areas protect against moderate cuts while the polyester back provides light cut protection, breathability, and helps reduce overall weight.
Product ID: 305ENLB
Flexible with heat protection for long periods of precise TIG welding
We designed our Endura® 305ENLB TIG welding gloves for long welding sessions that require more touch sensitivity for precise work. The elk leather palm provides a thinner shell for better dexterity and hand-feel that doesn’t sacrifice durability. The back-of-hand liner provides additional ambient heat resistance and spark protection for long welding. Sewing thread is made with Kevlar® fiber for added seam integrity.
Product ID: 505GP
Tough yet dexterous MIG welding gloves
Our Endura® 505GP gloves are made from high-quality goatskin leather for durability and toughness while maintaining comfort and dexterity. The gloves feature reinforced leather patches for enhanced protection against filler wire punctures and other hazards with sewing thread that adds seam durability and integrity. These versatile, spark resistant MIG welding gloves are tough enough for stick welding, while remaining flexible enough for material handling.
Product ID: STAGBLPVB
Twice the grip of typical leather palms plus maximum durability, dexterity and an ergonomic fit
Featuring exclusive ErgoHyde palms, these gloves provide maximum grip and durability on wet or oily surfaces while taking comfort and dexterity to a new level. Our ErgoHyde palm averages twice the grip of typical leather palms and its exclusive thermoforming technology creates an ergonomic fit for a natural feeling palm that optimizes dexterity. We’ve paired this with a knit glove body to add flexibility and breathability while Oilbloc™ ensures palms repel water and oil. These gloves also feature 360° cut resistance, flexible impact protection, and puncture-resistant palms.
Product ID: 378GCXVB
Maximum Cut Protection to Our Impact Line
Our new 378GCXVB gloves bring maximum cut resistance to our impact protection offering. The lining is made with DuPont™ Kevlar® fiber which provides 360° ANSI Level A9 cut protection while the flexible back-of-hand plate offers ANSI Level 2 impact protection – all in a highly durable leather shell that resists oil and water. Originally designed for use in oil and gas applications, these versatile gloves are useful for high-hazard applications in mining, forestry, construction, and other industries where cut and impact risks can be high.
Product ID: KPSTA18TH
Extreme cut protection sleeves with twice the amount of stretch
These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A9 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.
Product ID: S18TAFGNT
Cut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
Product ID: S13TANT
Touchscreen compatible gloves with high abrasion resistance
These touchscreen compatible TenActiv™ gloves feature a ZedCoat™ palm coating that provides ANSI Level 4 abrasion resistance. They’re made from a lint-free continuous filament yarn that’s stronger than steel and delivers both ANSI Level A4 cut protection and ANSI Level 5 puncture resistance. They’re snug-fitting and ergonomically shaped to ensure comfort, and have been treated with an active agent to achieve 99.9% antimicrobial status.
Product ID: S13TAFGPU
Comfortable, cut resistant gloves with a strong grip
A non-linting 13-gauge continuous filament yarn that’s stronger than steel provides these gloves with ANSI Level A3 cut resistance and ANSI Level 5 puncture resistance. Their polyurethane palm coatings ensure top-notch dexterity and a strong grip. A snug fit with ergonomic shaping provides hands with all-day comfort.
Product ID: STAGPN
Cut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
Product ID: S10NXFN
Touchscreen compatible, puncture resistant gloves with a strong grip
A blend of stainless steel and composite filament fibers provides ANSI Level 5 puncture resistance and ANSI Level 4 abrasion resistance. These 10-gauge, cut-resistant gloves are optimized for mining, metalwork, manufacturing, waste management and more. They feature nitrile palms for a superior grip and flexibility and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touch screen compatible, and latex free to prevent allergic reactions.
Product ID: STAGPNVPI
Cut protection meets vibration dampening
The combination of vibration-dampening neoprene padding, a TenActiv™ fiber yarn that provides ANSI Level A5 cut protection, and flexible ergonomic shaping makes these gloves ideal for handling pneumatic tools and grinders. They also benefit from nitrile-coated palms that displace oil to ensure an excellent grip on slick or slippery surfaces.