-
Superior Glove® 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Supera® Essentials WCKVFR
Product ID: WCKVFRNon-irritating fire-resistant watch cap for protection against fire hazards
Our Supera® WCKVFR watch cap is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this watch cap is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
Supera® Essentials NWKVFR
Product ID: NWKVFRNon-irritating fire-resistant neck warmer for protection against fire hazards
Our Supera® Essentials NWKVFR neck warmer is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this neck warmer is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
Supera® Essentials BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for protection against fire hazards
Our Supera® Essentials BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Superior® GLVBELTCLIP
Product ID: GLVBELTCLIPConvenient glove clips to keep hand protection near
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
-
ParaActiv Pro™ TK835LG2
Product ID: TK835LG2Maximum heat protection with cut resistance plus 4-inch leather cuffs for wrist protection
Our ParaActiv Pro™ TK835LG2 gloves offer maximum heat resistance with extended 4-inch leather cuffs for wrist safety when handling hot materials. The thick ParaActiv™ outer shell provides 360° cut protection with ANSI A5 cut resistance and and ANSI 5 heat protection with an inner cotton liner for comfort.
-
KnitActiv™ TBMOB
Product ID: TBMOBFood safe heavyweight mitts with maximum heat protection
Our KnitActiv™ TBMOB mitts are food safe and help protect hands against heat hazards. Made from heavyweight cotton, they’ve been internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C and feature a thin vinyl liner around hands to prevent hot liquids and vapor from penetrating the material. Treated to resist water and liquids, these gloves feature reinforced thumb crotch for protection against wear and tear. They’re CFIA-compliant for safe hood handling in Canada.
-
KnitActiv Pro™ SPGC/A
Product ID: SPGC/AInsulated maximum heat protection with cut resistance for plastic injection molding
Our KnitActiv Pro™ SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
-
ParaActiv Pro™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our ParaActiv Pro™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
TenActiv Pro™ SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our TenActiv Pro™ SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
KnitActiv™ STNCF
Product ID: STNCFLint-free with electrostatic dissipative properties to protect electronics from contaminants and static charges
Our lint-free KnitActiv™ STNCF gloves prevents contamination and feature electrostatic dissipative properties that ground energy to protect sensitive electronics. Made with carbon filament, they prevent static charges from building up, making them ideal for working with electronics. Latex-free construction limits the risk of allergic reactions and touchscreen compatibility helps to seamlessly move between tasks.
-
KnitActiv™ STN120HF
Product ID: STN120HFOpen-finger low-linting inspector gloves for the highest level of touch sensitivity
Our KnitActiv™ STN120HF inspector gloves feature an open-finger design for unobstructed touch sensitivity. Made from nylon for comfort, the finger openings are specially processed to prevent loose fibers from shedding material and help prevent contamination.
-
KnitActiv™ SQD
Product ID: SQDKnit gloves made with recycled materials plus dotted PVC palms for strong grip
Our KnitActiv™ SQD string knit shell is made with recycled materials, plus dotted palms for a strong grip that is breathable and dexterous. Their cotton / polyester blend provides cool and comfortable all-day wear. The PVC dot palm coating offers steady grip that is more breathable and flexible than full coverage palms. Ideal for use in material handling, warehousing, and low-hazard general tasks.
-
ParaActiv Pro™ SPGRK4
Product ID: SPGRK4High heat protection with high cut resistance plus extended 4-inch cuffs for hot parts handling and injection molding
Our ParaActiv Pro™ SPGRK4 gloves protect against high cut and heat hazards, plus extended 4-inch cuffs offer wrist protection against heat hazards. Latex-free ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and high ANSI 4 heat protection that reduces the risk of allergic reactions. They feature extended 4-inch cuffs for wrist and forearm protection, making them ideal for injection molding and handling hot parts.
-
ParaActiv Pro™ SPGRK/A
Product ID: SPGRK/AProtection for handling moderately hot rubber and plastic
Our ParaActiv Pro™ SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.
-
KnitActiv Pro™ SPGC2D
Product ID: SPGC2DHeat and cut protection for handling hot parts with double-sided PVC dots for breathable grip
Our KnitActiv Pro™ SPGC2D gloves protect against heat and cut hazards and feature double-sided PVC dots for breathable grip. Made with engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and ANSI 2 heat protection. A knit construction offers dexterity and comfort, making them ideal for handling hot parts while PVC dots along the palm and back of the hand offer steady grip that is more breathable and flexible than full coverage gloves. Latex-free to reduce the risk of allergic reactions, their ambidextrous design makes them reversible to increase wear life.
-
KnitActiv Pro™ SPGC
Product ID: SPGCCut protection with comfort for material handling
Our KnitActiv Pro™ SPGC gloves offer cut resistance with comfort when handling materials and parts where moderate cut hazards are present. Made with composite engineered yarn for 360° cut protection with ANSI A4 cut resistance, they feature a thicker 7-guage seamless knit for comfort when handling coarse material.
-
KnitActiv™ SPFGSS
Product ID: SPFGSSMaximum heat protection with strategic silicone-striped palms for hot parts handling
Our KnitActiv™ SPFGSS gloves offer maximum heat protection with silicone stripes on the palm for grip and comfort when handling hot parts. Made with latex-free materials, they provide 360° cut protection with ANSI A3 cut resistance and internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C. Strategically placed silicone palm stripes increase grip and allow air channeling for additional heat resistance.
-
KnitActiv Pro™ SNF
Product ID: SNFGlove liners for adding incidental cut protection and warmth
Our KnitActiv Pro™ SNF gloves protect hands against minor scrapes and cold. Polyester knit provides 360° cut protection with ANSI A2 cut resistance and insulation to keep hands warm and comfortable. Can be worn on their own or as a liner under other safety gloves for extra warmth that protects against incidental cuts.
-
ParaActiv™ SKX-W4
Product ID: SKX-W4Heat protection for handling heavy components in metal fabrication and stamping
Our ParaActiv™ SKX-W4 gloves are designed for heavy-duty metal fabrication and stamping tasks. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and internal testing verifies protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C. The wool liner traps air in and provides cushioning while protecting hands from thermal contact when handling heavy parts. Extended 4-inch cuffs provide additional protection to keep wrists safe.
-
ParaActiv Max™ SKGCXPS
Product ID: SKGCXPSMaximum cut-resistant gloves for tasks that don’t require a strong grip
Our ParaActiv Max™ SKGCXPS gloves are flexible and comfortable and offer maximum cut resistance. ParaActiv™ engineered yarn provides 360° cut protection with extreme ANSI A9 cut resistance. Reinforced thumb crotch stitching improves overall lifespan and protects against wear and tear.
-
ParaActiv™ SKFG2DFT
Product ID: SKFG2DFTCut protection with double-sided PVC dots and nitrile fingertips to balance breathability and grip
Our ParaActiv™ SKFG2DFT gloves protect against cut hazards and feature double-sided dots and fingertip coating for added breathable grip. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance while PVC dots along the palm and back of the hand to offer steady grip that is more breathable and flexible than full coverage gloves. Micropore nitrile fingertips offer better grip than typical dotted gloves and their ambidextrous design makes them reversable to increase wear life.
-
KnitActiv Pro™ S13TP3K
Product ID: S13TP3KLow-linting inspector gloves for protection against incidental cut hazards
Our KnitActiv Pro™ S13TP3K are low-linting inspector gloves that protect against minor cut hazards. Offering 360° cut protection with ANSI A2 cut resistance, these gloves are made with low-linting polyester knit that prevents contamination and makes them an ideal choice for assembly and paint line applications. They feature a snug fit to ensure lasting comfort and dexterity.
-
KnitActiv™ S13TN3K
Product ID: S13TN3KLow-linting lightweight inspection gloves to prevent contamination
Our KnitActiv™ S13TN3K gloves are low-linting to avoid shedding material and contamination. Light color knit helps to show dirt, stains, or other contaminates and they can be worn alone or as a liner for any work requiring extra insulation.
