-
SUPERA™ BNKVFR
Product ID: BNKVFRFire-resistant watch cap that is ultra soft for use with hard hats and headwear
This fire-resistant (FR) cap features a brimless design to fit comfortably underneath hard hats or other headwear. It offers maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. The fabric features inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
TenActiv™ S21TAXFNVB
Product ID: S21TAXFNVBImpact-resistant cut protection with high dexterity for light material handling
Our TenActiv™ S21TAXFNVB gloves offer cut protection and impact resistance while being ultra-thin for tasks that require improved hand movement where knocks and bump hazards are present. Ideal for light material handling, assembly, and construction work, they feature a foam nitrile palm coating that offers steady wet grip.
-
TenActiv™ STXLPNRVB
Product ID: STXLPNRVBCold-rated extreme cut protection with impact resistance for high hazard environments
Our TenActiv™ STXPNRVB gloves are designed to perform in any environment that presents a high level of cut and impact hazards while keeping hands warm down to -5°C / 23°F. They feature both a TenActiv™ engineered yarn knit for extreme cut resistance and back-of-hand impact protection against knocks and bumps. Hi-viz back of hand bumpers offer worker hand placement visibility while micropore nitrile palms offer a steady wet grip.
-
Endura® 378GOTXVB
Product ID: 378GOTXVBPremium leather with liquid resistance that protects against cuts and impact
Our Endura® 378GOTXVB gloves are liquid resistant and feature TenActiv™ engineered yarn liners to provide 360° cut protection with ANSI A6 cut resistance. These gloves are unpadded for a better sense of touch and wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails in oil and gas. The reinforced back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.
-
SUPERA™ DCKVFR
Product ID: DCKVFRFire-resistant neck gaiter with bib that is ultra soft and non-irritating for all day comfort
This fire-resistant (FR) neck gaiter with bib is designed for maximum comfort, coverage around the upper chest / shoulder area, and is comfortable enough for all-day wear. The two-layer Kermel®-viscose blend material is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
TenActiv™ S21TXUFNOF
Product ID: S21TXUFNOFOpen-finger maximum cut protection with outstanding dexterity and bare hand feel for fine assembly
Our ultra-thin TenActiv™ S21TXUFNOF open-finger gloves offer exceptional hand freedom with the highest level of cut resistance for assembly tasks that require bare fingers. Ideal for precision applications where dexterity is required and high cut hazards are present, their TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A9 cut resistance. The ultra-thin nitrile palm coating offers steady wet grip and a bare hand feel.
-
TenActiv™ S21TAXGPN
Product ID: S21TAXGPNHi-viz cut protection for hand movement and light material handling of oily parts
Our TenActiv™ S21TAXGPN gloves are cut resistant and ultra-thin for tasks that require better hand motion and grip when handling greasy material. Ideal for light material handling, assembly, and construction work, their hi-viz color increases visibility while a micropore nitrile palm coating offers steady grip in wet or oily conditions.
-
TenActiv™ KTAH1T
Product ID: KTAH1THi-viz safety sleeves for worker visibility made with comfortable, cut-resistant material
Our cut-resistant TenActiv™ KTAH1T safety sleeves are designed for comfort with a hi-viz green color for increased worker visibility. Flexible TenActiv™ engineered yarn offers 360° cut protection with high ANSI A5 cut resistance for better range of motion and is soft, breathable, and irritant-free material for all-day comfort that is cool-to-the-touch. The sleeve features an elastic grip at the bicep and a tapered fit, ensuring it remains securely in place.
Available with or without thumbholes in a variety of sizes that range from 18 inches to 22 inches in length. -
Endura® 361GTXLVB
Product ID: 361GTXLVBCold-rated winter mitts with impact protection and extreme cut resistance
Our Endura® 361GTXLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -20°C / -4°F. Leather is treated to resist liquids while the TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A8 cut resistance. Finger slots in the mitt help reduce hand fatigue when handling material.
-
TenActiv™ S18TXLX
Product ID: S18TXLXHi-viz maximum cut protection with high dexterity for abrasive material and glass handling
Our green hi-viz TenActiv™ S18TXLX gloves are made from advanced TenActiv™ engineered yarn that is cool to the touch and provides extreme cut protection, durability, and dexterity when handling abrasive material and glass. They feature 360° cut protection with maximum ANSI A9 cut resistance while micropore latex palm coating offers better wet grip than traditional latex palms. Their green hi-viz knit provides hand placement awareness and worker visibility on the job.
-
TenActiv™ S21TAXGFN
Product ID: S21TAXGFNHi-viz cut protection with high dexterity for light material handling
Our TenActiv™ S21TAXGFN gloves are cut resistant and ultra-thin for tasks that require improved hand movement and protection from cut hazards. Ideal for light material handling, assembly, and construction work, their hi-viz color increases visibility while a foam nitrile palm coating offers steady wet grip.
-
TenActiv™ S18TAXPUE
Product ID: S18TAXPUEEconomic choice for extreme cut protection and dexterity plus steady dry grip
Our TenActiv™ S18TAXPUE economic choice inspection gloves offer extreme protection against cut hazards without impeding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A7 cut resistance while their polyurethane palm coating offers dry grip and a bare hand feel. Ideal for tasks that require dexterity, tactility, and hand motion.
-
Endura® 399SC4
Product ID: 399SC4Durable general use leather gloves with gauntlet cuffs for wrist protection
Our Endura® 399SC4 gloves are made from tough cowskin for durability and a longer wear life. Ideal for general labor or other low hazard tasks, they feature extended gauntlet cuffs for wrist safety and for easier donning or glove removal.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LSlim-fit gloves for MIG welding and all-round fabrication with arc flash protection
Our Endura® 399GKGL5L gloves are designed with a slim fit for comfort and are ideal for MIG welding and all-round fabrication use. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and ANSI 3 heat protection. They are arc flash-rated level 3 with an ATPV of 36 cal / cm². Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6-inch gauntlet cuffs provide extra coverage where heat hazard exists.
-
Endura® 378SB
Product ID: 378SBGeneral use gloves with protection against scuffs and scrapes when material handling
Our Endura® 378SB gloves feature cowgrain palms for durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. Grain leather palms help resist liquid while a split leather back-of-hand improves durability for a longer wear life. Elasticized wrists offer flexibility and a snug fit for all day comfort.
-
Sure Knit™ SRW
Product ID: SRWGeneral use wool gloves for warmth in cold temperatures
Our Sure Knit™ SRW wool gloves keep hands warm in temperatures down to -5°C / 23°F. Natural antibacterial oils present in the wool prevent odor and offer quicker drying. The long ribbed cuffs keep out the cold, while their breathable, seamless knit design allows for comfort. The gloves can be worn on their own or as a liner for extra warmth.
-
Chemstop™ S18V30NT
Product ID: S18V30NTChemical-resistant PVC gloves with nitrile palm coating for wet grip
Our Chemstop™ S18V30NT gloves are designed with a green PVC shell to guard against chemicals, adhesives, and other solvents. Gauntlet cuffs add extra protection to the forearms and a flat nitrile palm coating adds durability and offers wet grip. With an ergonomic design, these gloves provide a high level of comfort and dexterity for all day wear, making them ideal for working in environments where grip is needed with the risk of chemical exposure.
-
Dexterity® S13BFNGP
Product ID: S13BFNGPBlack polyester gloves with patented palm strips for enhanced grip and durability
Our Dexterity® S13BFNGP knit gloves feature strategically placed, patented palm strips and foam nitrile coating for enhanced grip and durability. They are made from breathable dark colored polyester to hide dirt and stains making them ideal for general labor or other low hazard tasks.
-
Sure Knit™ STA5
Product ID: STA5Color-coded food handling gloves with extreme cut protection
Our Sure Knit™ STA5 food safe gloves are available in four colors for allocation to different areas in food processing plants to help prevent cross-contamination. FDA and CFIA compliant, they are made with TenActiv™ engineered yarn to provide 360° cut protection with extreme ANSI A7 cut resistance and have been treated with an active agent to achieve a 99.9% antimicrobial status. A shrink-preventing treatment makes them fully launderable for easy cleaning.
Available in four colors: pink (STA5PK), orange (STA5O), blue (STA5BU), and hi-viz green (STA5HV). -
Endura® 370DTIGL
Product ID: 370DTIGLSlim-fit everyday TIG welding gloves designed for better comfort with enhanced sense of touch and heat protection
Our heat-resistant Endura® 370DTIGL gloves are designed with a slim fit for comfort and protection when TIG welding. They balance durability with the tactile flexibility of deerskin for a better sense of touch and dexterity. Cushioned patches on the outer side of hands provide comfort when resting on surfaces during welding sessions. ANSI 2 heat resistance provides protection and they are sewn with ParaActiv™ thread for added seam integrity.
-
Endura® 398KGLBGL
Product ID: 398KGLBGLSlim-fit MIG welding gloves designed for better comfort plus protection from material handling hazards
Our Endura® 398KGLBG MIG welding gloves are designed with a slim fit for comfort plus protection against heat and cuts. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance while back-of-hand fleece lining offers ANSI 2 heat protection. Dark coloring hides dirt and stains for a longer wear life plus extended 6-inch cuffs offer added wrist and forearm protection. Padded palm patches offer further comfort when material handling.
-
Sure Knit™ S13CPWH
Product ID: S13CPWHWhite sweat-wicking breathable gloves for general use
Our Sure Knit™ S13CPWH gloves can be worn alone or as a liner for any work requiring extra insulation. Made with breathable material that wicks away sweat for added warmth and comfort, the light color helps to show dirt, stains, or other signs of wear and tear.
-
Snow Force™ SNOW388V
Product ID: SNOW388VInsulated gloves for extreme cold protection down to -30°C / -22°F
Our SnowForce™ SNOW388V insulated gloves are designed for extreme cold temperatures down to -30°C / -22°F. Ideal for tasks where cold is the primary hazard, these gloves feature three layers of insulation for warmth in the harshest of climates. Waterproof and breathable insulation locks out water and wind, while the adjustable wrist closure ensures a snug fit. PVC patches on the palm and fingertips provide grip in wet conditions.
-
Endura® 685BFI
Product ID: 685BFIAluminized gloves for long sessions of stick welding
Our Endura® 685BFI gloves feature reflective foam lining that protects against radiant heat and sparks with ANSI 4 heat protection. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
