-
Dexterity Pro™ S21TAXFN
Product ID: S21TAXFNBarehand dexterity meets 360° ANSI Level A5 cut protection
These touchscreen-compatible, 21-gauge gloves are the closest you can get to a barehand feel while still achieving a high level of cut resistance. Their TenActiv™ wire-core composite filament fiber blend ensures 360° ANSI Level A5 cut protection, while a foam nitrile coating at the palms provides a secure grip on lightly oiled parts. For added protection, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
Dexterity® S18TAXFN
Product ID: S18TAXFNUltra-thin hi-viz maximum cut protection for better sense of touch and hand placement awareness
Our Dexterity® S18TAXFN hi-viz gloves provide maximum cut resistance in an ultra-thin form for a better sense of feel. TenActiv™ engineered yarn offers 360° cut protection with extreme ANSI A9 cut resistance, plus their foam nitrile palm coating provides steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv Pro™ S13TAXFN
Product ID: S13TAXFNThin cut protection for better hand mobility plus steady wet grip when handling lightly oiled parts
Our cut-resistant TenActiv Pro™ S13TAXFN gloves are thin for hand mobility and offer a steady wet grip. TenActiv™ engineered yarn material provides 360° cut protection with high ANSI A5 cut resistance while foam nitrile palm coating offers steady wet grip when handling lightly oiled parts. Ideal for metal fabrication and sheet metal handling tasks.
-
KeepKleen® RDNMD
Product ID: RDNMDMetal-detectable disposable food handling gloves for accidental contamination detection
Our KeepKleen® RDNMD metal-detectable disposable gloves help reduce costs associated with accidental contaminations and food waste. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78 inches to prevent food waste shutdowns by adding and additional layer of control. They are suitable for food handling with texturized fingertips for steady grip.
-
Superior Glove® 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Endura Pro™ 398OBPB
Product ID: 398OBPBMIG welding gloves with zoned hypodermic protection on thumb and index finger to guard against tungsten welding wire injuries
Our Endura® 398OBPB MIG welding gloves feature double-layered maximum ANSI 5 hypodermic puncture protection on the thumb and index finger on the dominant hand to guard against common welding wire injuries. The off-hand glove also features a single-layer palm liner for additional ANSI 3 hypodermic puncture protection. Both off-hand and dominant hand gloves are lined with ParaActiv™ engineered yarn for 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection. Sewn with ParaActiv™ thread for added seam integrity and treated to resist water and liquids, these gloves feature padded palms and cuffs for comfort and protection when welding. Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) versions.
-
Endura® 378GOBFC
Product ID: 378GOBFCCrush-resistant finger caps to protect fingers from pinch-point hazards
Our Endura® 378GOBFC gloves offer fingertip crush resistance to protect fingers from pinch-point hazards while still allowing flexibility and movement. Goatskin leather offers natural abrasion and a full cotton liner provides additional comfort. Treated to resist water and liquids, these gloves feature keystone thumb design to improve durability for a longer wear life.
To improve dexterity and comfort the finger cap is not included in the pinky finger.
-
Endura Pro™ 378GKG4P
Product ID: 378GKG4PMulti-hazard FR protection with flexible maximum impact-resistant bumpers for hand movement plus cut and liquid protection
Our fire-resistant Endura Pro™ 378GKG4P gloves protect hands from multiple types of hazards, including arc flash, liquids, and cut risks plus their maximum impact protection is more flexible than typical comparable protection. Offering dual-hazard protection against flash fire and electrical arc flash, these gloves feature 4PRO™ back-of-hand bumpers for maximum ANSI 3 impact protection against knocks and bumps without sacrificing dexterity. ParaActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance. They offer ANSI 4 heat resistance and are arc flash-rated level 3 with an ATPV of 35 cal / cm². They also feature padded palms for comfort when material handling and are treated to resist water and liquids.
-
Superior® GLVBELTCLIP
Product ID: GLVBELTCLIPConvenient glove clips to keep hand protection near
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
-
ParaActiv Pro™ TK835LG2
Product ID: TK835LG2Maximum heat protection with cut resistance plus 4-inch leather cuffs for wrist protection
Our ParaActiv Pro™ TK835LG2 gloves offer maximum heat resistance with extended 4-inch leather cuffs for wrist safety when handling hot materials. The thick ParaActiv™ outer shell provides 360° cut protection with ANSI A5 cut resistance and and ANSI 5 heat protection with an inner cotton liner for comfort.
-
KnitActiv™ TBMOB
Product ID: TBMOBHeavyweight mitts with maximum heat protection for food handling
Our KnitActiv™ TBMOB mitts are suitable for food handling and help protect hands against heat hazards. Made from heavyweight cotton, they’ve been internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C and feature a thin vinyl liner around hands to prevent hot liquids and vapor from penetrating the material. Treated to resist water and liquids, these gloves feature reinforced thumb crotch for protection against wear and tear.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
ParaActiv Pro™ SCXPNTFC
Product ID: SCXPNTFCDouble-coated gloves for liquid protection and cut resistance
Our ParaActiv Pro™ SCXPNTFC gloves are double-coated cut protection for water and liquid resistance. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while the full hand coating protects against liquid penetration. A double-layer ¾ micropore nitrile palm coating offers steady wet grip, making these gloves ideal for metal fabrication and glass manufacturing.
-
Dexterity® S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our Dexterity® S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
Dexterity® S18TAFGNT
Product ID: S18TAFGNTLow-linting ultra-thin cut protection with specially formulated non-marring palm coating for longer wear life
Our low-linting Dexterity® S18TAFGNT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend wear life. The non-marring nitrile palm coating provides steady wet grip that will not leave residue for product finishing. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and their ultra-thin construction improves freedom of movement with a bare-hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNUltra-thin silicone-free touchscreen compatibly for protection against minor cut hazards
Our ultra-thin Dexterity® S18KGFN gloves are silicone-free and provides touchscreen compatibility plus protection against minor cut hazards. ParaActiv™ engineered material offers 360° cut protection with ANSI A3 cut resistance. The foam nitrile palm coating offers a steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPULow-linting gloves to prevent contamination with incidental cut protection and tactile dry grip
Our TenActiv™ S15TAFGPU low-linting gloves offer low cut protection to protect hands from incidental cut hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A3 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
KnitActiv™ S15NT
Product ID: S15NTEarth-friendly cotton gloves with biodegradable nitrile palm coating
Our earth-friendly KnitActiv™ S15NT gloves are made with cotton that is comfortable to wear and naturally biodegrades. The nitrile palm coating is made with biodegradable additives and offers a steady wet grip for general use.
-
KnitActiv™ S13WPPU
Product ID: S13WPPUWhite polyester low-linting gloves for food machine maintenance with non-marring palms that show dirt and contamination
Our KnitActiv™ S13WPPU white polyester gloves are low-linting and non-marring to detect and prevent contamination during food machine maintenance. Non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They are suitable for food handling.
-
TenActiv Max™ S13TAWFN
Product ID: S13TAWFNLatex-free maximum cut protection with wet grip for handling lightly oiled parts
Our latex-free TenActiv Max™ S13TAWFN gloves offer maximum cut protection and wet grip when handling lighly oiled parts. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Made with latex-free materials to avoid allergic reactions, these gloves feature a foam nitrile hand coating for a steady wet grip.
-
TenActiv™ S13TAPUCF
Product ID: S13TAPUCFElectrostatic dissipative cut protection plus touchscreen compatibility for work with microelectronics
Our cut-resistant TenActiv™ S13TAPUCF gloves offer electrostatic dissipative properties that ground energy and are touchscreen compatible. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance. Ideal for working with electronics, they are made with carbon filament for electrostatic dissipative properties to ground energy and prevent static charges from building up. They feature a polyurethane palm coating for a better dry grip and tactile feel, plus are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TANT
Product ID: S13TANTCut protection with specially formulated non-marring palm coating for durability and longer wear life
Our TenActiv™ S13TANT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend their wear life. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance while the nitrile palm coating provides steady wet grip that is touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TAGPU
Product ID: S13TAGPUNon-marring low-linting gloves for incidental cut protection plus tactile dry grip that won't leave residue
Our TenActiv™ S13TAGPU low-linting gloves offer low cut protection with non-marring palms for better dry grip and tactile feel that will not leave residue. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
TenActiv™ S13TAFNT
Product ID: S13TAFNTEconomic choice latex-free cut resistance with touchscreen compatibility and steady wet grip
Our TenActiv™ S13TAFNT gloves are an economic choice for cut resistance with touchscreen compatibility and steady wet grip for handling lightly oiled parts. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and is latex-free to reduce risk of allergies. Foam nitrile palm coating provides steady wet grip and is touchscreen compatible to seamlessly move between tasks.
